• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.9-17
• /
• 2020

Recently, RES (renewable energy source) projects have been spreading all over the world as an alternative to solve the shortage of energy and environmental problems caused by fossil fuel consumption. The Korean government also supported the policy and demonstration project to increase the proportion of renewable energy to 63.8[GW] until 2030, which is 20[%] of the total power generation. On the other hand, output loss of a PV array can occur when the surrounding high-rise buildings and trees shade a PV array. Therefore, this paper proposes an algorithm to improve the output loss of a PV array, which electrically changes a circuit configuration of PV modules by wiring and switching devices. Furthermore, this study modeled a PV system based on PSIM S/W, which was composed of a PV array, a circuit configuration device, and a grid-connected inverter. From the simulations results with the modeling and test device, the existing method showed no output when 50% of the shade occurs in PV modules. In contrast, the proposed method could produce the output because the voltage in the PV module could be restored to 246[V], and the operation efficiency of the PV system could be improved by the operation algorithm of the circuit configuration device.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.272-279
• /
• 2010

KNF-1002, a new fungicide candidate, is very effective for protecting crops against plant diseases, but its curative activity against barley powdery mildew is negligible due to its weak penetrability into plant leaf. To select the most efficient activator and, at the same time, spreade-sticker, foliar uptake and deposit of aqueous spray formulations containing non-ionic or anionic surfactants and fatty acid alkyl esters as an adjuvant were assessed by using Congo Red method. In the absence of activator, only 0.1% of the applied active ingredient was absorbed by barley leaves 24 h after spraying with an aqueous acetone containing KNF-1002 100 mg/L. But, non-ionic surfactants (500 mg/L), such as heptaethylene glycol monooctadecenyl ether (OE-7), dodecaethylene glycol monohexadecyl ether (CE-12), so facilitated KNF-1002 uptake that the uptake was increased up to 48.5%. To wheat plant, the addition of surfactants in spray solution of KNF-1002 also increased the foliar uptake and deposition of active ingredient, but its efficiency varied according to the kind of fatty alcohol moiety of polyoxyethylene surfactant. KNF-1002 formulations containing nonaethylene glycol monododecyl ether (LE-9) as an activator and spreader-sticker showed remarkable increases of fungicidal activity against barley powdery mildew.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.9
• /
• pp.397-406
• /
• 2017

In case of using the existing encrypted algorithm for massive data encryption service under the cloud environment, the problem that requires much time in data encryption come to the fore. To make up for this weakness, a partial encryption method is used generally. However, the existing partial encryption method has a disadvantage that the encrypted data can be inferred due to the remaining area that is not encrypted. This study proposes a partial encryption method of increasing the encryption speed and complying with the security standard in order to solve this demerit. The proposed method consists of 3 processes such as header formation, partial encryption and block shuffle. In step 1 Header formation process, header data necessary for the algorithm are generated. In step 2 Partial encryption process, a part of data is encrypted, using LEA (Lightweight Encryption Algorithm), and all data are transformed with XOR of data in the unencrypted part and the block generated in the encryption process. In step 3 Block shuffle process, the blocks are mixed, using the shuffle data stored with the random arrangement form in the header to carry out encryption by transforming the data into an unrecognizable form. As a result of the implementation of the proposed method, applying it to a mobile device, all the encrypted data were transformed into an unrecognizable form, so the data could not be inferred, and the data could not be restored without the encryption key. It was confirmed that the proposed method could make prompt treatment possible in encrypting mass data since the encryption speed is improved by approximately 273% or so compared to LEA which is Lightweight Encryption Algorithm.

• Clinical and Experimental Reproductive Medicine
• /
• v.20 no.2
• /
• pp.107-115
• /
• 1993

Procedures to separate motile. normal & motile and acrosome-reacted sperm with high efficiency have clinical application in Assisted Reproductive Technology in terms of increasing the probability of fertilization by a normal sperm and subsequent normal embryonic development. This study evaluated the effects of 10 sperm preparation techniques [Swim-up from a washed pellet (SU). Swim-up from semen (SO). Continuous Percoll Gradients I (PIC). Discontinuous Percoll Gradients I (PID). Continuous Percoll Gradients II(P II C). Discontinuous Percoll Gradients II(P II D), SpermPrep (SFC). Wang's tube (WT). Albumin Gradients (AG), Low temperature capacitation (LTC)] on motility (%), normal morphology (%), motile sperm recovery rate(%). morphologically normal & motile sperm recovery rate (%), true acrosome reaction (%) and fertilizing ability. A P II D proved to be an effective means of separating morphologically normal & motile sperm. Our results indicated the P II D has advantages as compared with other methods in terms of recovery rate. enhancement of motility and normal morphology. And a LTC seems to be an effective means of enhancing the true acrosome reaction and fertilizing ability. These results suggest that the combined method of LTC and P II D for separation of morphologically normal & motile sperm and acrosome reacted sperm may be a useful procedure for intrauterine insemination and in vitro fertilization in the management of male factor infertility as well as for isolation of subpopulation of sperm for basic research.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.71-81
• /
• 2010

In grid system, Task scheduling based on list scheduling models has showed low complexity and high efficiency in fully connected processor set environment. However, earlier schemes did not consider sufficiently the communication cost among tasks and the composition process of lightpath for communication in optical gird environment. In this thesis, we propose LSOG (Leveling Selection in Optical Grid) which sets task priority after forming a hierarchical directed acyclic graph (DAG) that is optimized in optical grid environment. To determine priorities of task assignment in the same level, proposed algorithm executes the task with biggest communication cost between itself and its predecessor. Then, it considers the shortest route for communication between tasks. This process improves communication cost in scheduling process through optimizing link resource usage in optical grid environment. We compared LSOG algorithm with conventional ELSA (Extended List Scheduling Algorithm) and SCP (Scheduled Critical Path) algorithm. We could see the enhancement in overall scheduling performance through increment in CCR value and smoothing network environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.77-87
• /
• 2018

Many researches have been focused on localization in WSNs. However, the solutions for localization in static WSN are hard to apply to the mobile WSN. The solutions for mobile WSN localization have the assumption that there are a significant number of anchor nodes in the networks. In the resource limited situation, these solutions are difficult in applying to the static and mobile mixed WSN. Without using the anchor nodes, a localization service cannot be provided in efficient, accurate and reliable way for mixed wireless sensor networks which have a combination of static nodes and mobile nodes. Also, accuracy is an important consideration for localization in the mixed wireless sensor networks. In this paper, we presented a method to satisfy the requests for the accuracy of the localization without anchor nodes in the wireless sensor networks. Hop coordinates measurements are used as an accurate method for anchor free localization. Compared to the other methods with the same data in the same category, this technique has better accuracy than other methods. Also, we applied a minimum spanning tree algorithm to satisfy the requests for the efficiency such as low communication and computational cost of the localization without anchor nodes in WSNs. The Java simulation results show the correction of the suggested approach in a qualitative way and help to understand the performance in different placements.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.191-198
• /
• 2014

A semi-pilot hybrid system composed of a photocatalytic reactor and a biofilter was operated under various operating conditions in order to treat malodorous waste air containing both hydrogen sulfide and ammonia which are major air pollutants emitted from composting factories and many publicly owned treatment works (POTW). When both hydrogen sulfide and ammonia contained in malodorous waste air were treated simultaneously by a biofilter system, its performance of ammonia removal was much more poor than that by a biofilter system treating waste air containing only ammonia, unlike its performance of hydrogen sulfide removal. For semi-pilot hybrid system, the removal efficiencies of hydrogen sulfide and ammonia turned out to be ca. 83 and 65%, respectively. Therefore, for semi-pilot hybrid system, the removal efficiencies of hydrogen sulfide and ammonia was increased by ca. 4 and 30%, respectively, compared to those of semi-pilot biofilter system (control). In addition, the maximum elimination capacities of hydrogen sulfide and ammonia for semi-pilot hybrid system turned out to be ca. 60 and $37g/m^3/h$, respectively. These maximum elimination capacities of hydrogen sulfide and ammonia were estimated to be ca. 9.1% and ca. 23.3% greater than those for semi-pilot biofilter system (control), respectively. Therefore, the semi-pilot hybrid system contributed the enhancement of removal efficiency and the maximum elimination capacity of ammonia in a higher degree than that of hydrogen sulfide, compared to the semi-pilot biofilter system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.209-218
• /
• 2012

Recently, the Field Programmable Stateful Logic Array (FPSLA) was proposed as one of the most promising system integration technologies which will extend the life of the Moore's law. This work is the first proposal of the FPSLA design automation flow, and the approaches to logic synthesis, synchronization, physical mapping, and automatic placement of the FPSLA designs. The synchronization at each gate for pipelining determines the x-coordinates of cells, and reduces the placement to 1-dimensional problems. The objective function and its gradients for the non-linear optimization of the net length and placement density have been remodeled for the reduced global placement problem. Also, a recursive algorithm has been proposed to legalize the placement by relaxing the density overflow of bipartite bin groups in a top-down hierarchical fashion. The proposed model and algorithm are implemented, and validated by applying them to the ACM/SIGDA benchmark designs. The output state of a gate in an FPSLA needs to be duplicated so that each fanout gate can be connected to a dedicated copy. This property has been taken into account by merging the duplicated nets into a hyperedge, and then, splitting the hyperedge into edges as the optimization progresses. This yields additional 18.4% of the cell count reduction in the most dense logic stage. The practicality of the FPSLA can be further enhanced primarily by incorporating into the logic synthesis the constraint to avoid the concentrated fains of gates on some logic stages. In addition, an efficient algorithm needs to be devised for the routing problem which is based on a complicated graph. The graph models the nanowire crossbar which is trimmed to be embedded into the FPSLA fabric, and therefore, asymmetric. These CAD tools can be used to evaluate the fabric efficiency during the architecture enhancement as well as automate the design.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.541-548
• /
• 2018

In this work, the $N_2O$ decomposition catalyst and reaction characteristics to control the $N_2O$ removal were described. Experiments were carried out by using Rh as an active metal catalyst on various supports and the $Rh/CeO_2$ catalyst with $CeO_2$ support showed the best activity for the $N_2O$ decomposition when it was prepared under the constant heat treatment condition ($500^{\circ}C$-4 hr). $H_2-TPR$ and XPS analyzes were performed to confirm the effect of the physical and chemical properties of the catalyst on $N_2O$ decomposition. As a result, it was found that the increase of the oxygen transfer capacity of the catalyst due to the increase of both the redox property and $Ce^{3+}$ amount affected the decomposition reaction of $N_2O$. In addition, the future work will include a treatment process capable of decomposition $N_2O$ and NO under the condition that $N_2O$ and NO are simultaneously generated and its characteristics of $N_2O$ decomposition reaction.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.639-648
• /
• 2009

Earth's environment issues are introduced recently and every year the social loss have been occurred by the impact of various disaster. This kind of disaster and weather problems are the increasing reason of electricity transmission network equipment's failures because of exposing by the natural environment. The emergency and abnormal status of electricity equipment make the power outage of manufacturing plant and discomfort of people's lives. So, to protect the electricity equipment from the natural disasters and to supply the power to customer as stable, the supporting systems are required. In this paper, the research results are described the development process and the outcomes of the real-time natural disaster failure analysis information system including the describing about the impact of disaster and weather change, making the natural weather information, and linking the realtime monitoring system. As of development process, according to application development methodology, techniques are enumerated including the real time interface with related systems, the analysing the geographic information on the digital map using GIS application technology to extract the malfunction equipment potentially and to manage the equipments efficiently. Through this system makes remarkable performance it minimize the failures of the equipments, the increasing the efficiency of the equipment operation, the support of scientific information related on the mid-term enhancement plan, the savings on equipment investment, the quality upgrading of electricity supply, and the various supports in the field.