• 산업공학
• /
• 제25권1호
• /
• pp.96-105
• /
• 2012

Recently, the interoperability has become more important to enhance the net-centric capabilities of the warfighter. DITA (Defense Information Technical stAndard) is the set of IT standards for improving interoperability, scalability, effectiveness, and efficiency. In this paper, we analyzed the standardizing process to derive the selection criteria and structurized the derived selection criteria using the KJ (Kawakita Jiro) method. Finally, we developed an evaluation model for selecting a standard for DITA using AHP (Analytic Hierarchy Process). As a result, we present eight selection criteria (maintainability, trend, stability, portability, effect of other standard, constraint of the network, and applicability to the systems). We also applied some examples that several IT standards to our selection model for validating the model. We expect our model to help to decide objectively whether the new standard can be listed in DITA.

• Steel and Composite Structures
• /
• 제34권3호
• /
• pp.333-345
• /
• 2020

In the past, many efficient profiles have been developed for cold-formed steel (CFS) members by judicious intermediate stiffening of the cross-sections, and they have shown improved structural performance over conventional CFS sections. Most of this research work was based on numerical modelling, thus lacking any experimental evidence of the efficiency of these sections. To fulfill this requirement, experimental studies were conducted in this study, on efficient intermediately stiffened CFS sections in flexure, which will result in easy and simple fabrication. Two series of built-up sections, open sections (OS) and box sections (BS), were fabricated and tested under four-point loading with same cross-sectional area. Test strengths, modes of failure, deformed shapes, load vs. mid-span displacements and geometric imperfections were measured and reported. The design strengths were quantified using North American Standards and Indian Standards for cold-formed steel structures. This study confirmed that efficient profiling of CFS sections can improve both the strength and stiffness performance by up to 90%. Closed sections showed better strength performance whereas open sections showed better stiffness performance.

• 대한한의정보학회지
• /
• 제15권1호
• /
• pp.67-76
• /
• 2009

Quality management is a recent phenomenon. Advanced civilizations that supported the arts and crafts allowed clients to choose goods meeting higher quality standards than normal goods. There are many methods for quality improvement. Health care, refers to the treatment and management of illness, and the preservation of health through services offered by the medical, dental, complementary and alternative medicine, pharmaceutical, clinical laboratory sciences (in vitro diagnostics), nursing, and allied health professions. Health care embraces all the goods and services designed to promote health, including "preventive, curative and palliative interventions, whether directed to individuals or to populations. The overall impact of managed care remains widely debated. Proponents argue that it has increased efficiency, improved overall standards, and led to a better understanding of the relationship between costs and quality. Practices can solicit feedback from patients in a variety of ways: phone surveys, written surveys, focus groups or personal interviews. What do I do with the results? While you don't have to act on every suggestion that your patients give you, you should take action on the key items that are causing dissatisfaction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.515-517
• /
• 2004

The laser absorption spectroscopy has been used for measuresurement of the xenon atoms in the resonant $1S_4$ and metastable $1S_5$ states in coplanar AC PDP. For the purpose of improving VUV luminous efficiency and optimization of PDP cells, it is important to study behavior of excited Xe atoms in a micro-discharge cell of a coplanar AC-PDP. We measured the xenon excited density of $1S_5$ and $1S_4$ state under mixture gas of Ne-Xe(10%) with gas pressure of 350 Torr and sustaining gap distance of 150 um.

• 신재생에너지
• /
• 제6권2호
• /
• pp.27-32
• /
• 2010

Low Calorific Gas Turbine (LCGT) has been developed as a next generation power system using landfill gas (LFG) and biogas made from various organic wastes, food Waste, waste water and Livestock biogas. Low calorific fuel purification by pretreatment system and carbon dioxide fixation by green house system are very important design target for the optimum applications of LCGT. Main troubles of Low Calorific Gas Turbine system was derived from the impurities such as hydro sulfide, siloxane, water contained in biogas. Even if the quality of the bio fuel is not better than natural gas, LCGT may take low quality gas fuel and environmental friendly power system. The mechanical characterisitics of LCGT system is a high energy efficiency (>70%), wide range of output power (30 kW - 30 MW class) and very clean emission from power system (low NOx). A green house has been designed for four different carbon dioxide concentration from ambient air to 2000 ppm by utilizing the exhaust gas and hot water from LCGT system. LCGT is expected to contribute achieving the target of Renewable Portfolio Standards (RPS).

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.659-667
• /
• 2006

This research aims at applicability of adsorption process in order to satisfy the restricted Effluent Quality Standards for dyeing wastewater. The dyeing wastewater treated by biological process with carrier imbedded microorganisms was directly applied to the activated carbon adsorption in Process A, The dyeing wastewater treated by Fenton oxidation for the effluent of biological process was applied to the adsorption in Process B. It was found that the optimum conditions of adsorption with granular activated carbon are $20^{\circ}C$ and 120 minutes for the batch experiment. Langmuir equation was fitted better than Freundlich equation to the experimental data. The breakthrough time of adsorption column was determined by color rather than $COD_{Mn}$ for both Process A and Process B. The results revealed that the breakthrough time of adsorption for two processes was extended by the treatment of Fenton oxidation for dyeing wastewater treated by biological treatment than the direct application of dyeing wastewater treated by the biological treatment. Adsorption process can be applied in order to meet the restricted Effluent Quality Standards for dyeing wastewater.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권3호
• /
• pp.339-347
• /
• 2000

국내외적으로 정보통신망의 구축이 활발히 진행됨에 따라 이를 이용하여 개인이나 기업이 업무의 효율성을 높이기 위하여 전자적으로 문서를 교환하여야 할 필요성이 증대되고 있다. 이를 위한 표준으로 UN에서는 전자문서표준을 제정, 보급함으로써 신속하고 정확한 업무의 처리를 돕고 있다. 이 논문에서는 UN에서 제정한 전자문서표준에 따르는 EDI 문서를 통합적으로 처리하는 시스템을 설계하고 구현한다. 이 시스템은 세 개의 부 시스템으로 구성되어 있는데, 각각은 EDI 문서가 문법적으로 올바른지를 검사하기 위한 EDI 파서, EDI 문서를 작성하기 위한 EDI 문서 편집기, 그리고 EDI 문법 규정을 참조하기 위한 EDI 디렉토리 뷰어이다. 이러한 도구들을 통합적으로 사용하면 오류 없는 EDI 문서를 원활히 작성할 수 있을 것이다.

• 한국대기환경학회지
• /
• 제15권2호
• /
• pp.121-138
• /
• 1999

This study was carried out to evaluate the performance of a sampling and analytical methodology for the measurement of selected volatile organic compounds (VOCs) in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/FID and GC/MSD analysis. Target analytes were aromatic VOCs, including BTEX, 1,3,5-and 1,2,4,-trimethylbenzenes(TMBs), and naphthalene. The methodology was investigatedwith a wide range of performance criteria such as repeatability, linearity, lower detection limits, collection efficiency, thermal conditioning, breakthrough volume and calibration methods using internal and external standards. standards. Stability of samples collected on adsorbent tubes during storage was also investigated. In addition, the sampling and analytical method developed during this study was applied to real samples duplicately collected in various indoor and outdoor environments. Precisions for the duplicate samples and distributed volume samples appeared to be well comparable with the performance criteria recommended by USEPA TO-17. The audit accuracy was estimated by inter-lab comparison of both duplicate samples and standard materials between the two independent labs. The overall precision and accuracy of the method were estimated to be within 30% for major aromatic VOCs such as BTEX. This study demonstrated that the adsorbent sampling and thermal desorption method can be reliably applied for the measurement of BTEX in ppb levels frequently occurred in common indoor and ambient environments.

• 상하수도학회지
• /
• 제26권1호
• /
• pp.131-139
• /
• 2012

Field experiment was performed from June 2010 to July 2011 to evaluate pollutants removal efficiency in the constructed wetland system for the treated wastewater and the river water. The wetland systems were constructed near Gyungan river. Two different systems with meandering shape were compared for seasonal base and operational period base. Several kinds of aquaculture are planted through the corridor of wetland system. Average removal rate of BOD, T-N and T-P for A system were 15.8%, 14.8% and 26.5%, respectively. Average removal rate of BOD, T-N and T-P for C system were 23.5%, 27.8% and 10.6%, respectively. The effluent from two wetland systems often exceeded effluent water quality standards for wastewater influent, however effluent water quality standards for river water. However, the wetland system can be useful to treat polluted river water and effluent from wastewater plant. Removal rate of pollutants in seasonal variation was the highest in summer for BOD and T-N, however the removal rates of T-P were higher in spring and autumn than in summer.

• 한국지열·수열에너지학회논문집
• /
• 제13권4호
• /
• pp.31-38
• /
• 2017

The heating and cooling air conditioning field has been increasing the problems of energy consumption and global warming in the world. A geothermal heat pump has been known as one of the highest efficient heating and cooling system. In this study, the analysis about the test standards of the geothermal heat pump of the Republic of Korea was executed. From the research, the following results were given. It is needed to address the domestic test standard for direct heat exchange geothermal heat pump. Water to air multi geothermal heat pump test standard was only developed in Korea. The test standard to calculate a seasonal energy efficiency ratio for cooling period and heat seasonal performance factor for heating period should be newly developed to estimate actual annual energy consumption and $CO_2$ emission.