• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.91-100
• /
• 2004

Energy efficiency evaluation method for a multi-type air conditioning system still has not been developed. In this study, analysis on capacity range and evaluating method of standards for air conditioners was conducted with world-wide Standards. It is not a proper approach to use the standards for residential air conditioner to multi type air conditioners. Some difficulties and problems are commented in this study with overview of the standards. Through the analytic research, an evaluating method for multi type air conditioner was suggested with Integrated Part Load Value (IPLV). The suggested concept for evaluating energy efficiency during part load condition considers building load pattern and operating hours of the system at different locations. Load was weighted in IPLV to consider not only the concept of occurrence of outdoor temperature such as bin method but also operation hours of the system. An experiment about the IPLV was conducted with variable air volume ducted type air conditioning system and multi-type system through modified code tester to give a glance at quantitative value of the IPLV.

• Journal of the Korean Magnetic Resonance Society
• /
• v.23 no.2
• /
• pp.46-50
• /
• 2019

Spin orbit torque would be applied as the next generation of MRAM, so many researchers are interested in related field. To make a more efficient device, electric current should convert into spin current with high efficiency. Moreover, it becomes important to measure efficiency of spin orbit torque accurately. We measured spin torque FMR of W/CoFeB hetero structure system with direct current. The efficiencies of the damping like torque and field like torque were measured by using the linewidth and on-resonance field proportional to direct current. In addition, we analyzed that a quadratic shift of the on-response field was caused by the Joule heating.

• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.497-508
• /
• 2018

Purpose: The purpose of this study is to research the revision efficiency of the referenced specifications/standards for raw and subsidiary materials in the field of national defense. Methods: Firstly, it was carried out to investigate the all of the Korean military drawings and establish the database for specifications/standards referenced in the field of national defense. Secondly, it was reviewed the validity of referenced specifications/standards of raw and subsidiary materials. Finally, proposal documents were made for invalid referenced specifications/standards of raw and subsidiary materials in order to suggest alternative specifications/standards. Results: All of the specifications/standards referenced in the Korean military drawings were 11,924 kinds and raw and subsidiary specifications/standards were 2,711 kinds. The proposal documents for revision of invalid referenced specifications/standards were suggested and approved by the military procurement standardization committee of DAPA (Defense Acquisition Program Administration). Therefore, the revision process of 472 kinds of referenced specifications/standards and 160,177 papers of the Korean military drawings were finished. Conclusion: Based on the results of this investigation, it could be significantly reduce to administrative costs and efforts through revision of referenced specifications/standards instead of conventional engineering change.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.112-121
• /
• 2001

From the beginning of 1990s, the leading countries, especially United States, are trying to develop dual-use technology which can be used for both military and commercial purpose, and to improve the efficiency of management system in logistics and procurements. Considering the global trends, Department of Defence has been seeking for solutions as to how to reform military specifications, and launched specification unification projects. As a result of the project, a series of dual-use standards for hardwares are being developed in the form of Korea Industrial Standards(KS standards). However, there are many of foreign standards, which are not readily interpretable by users, referenced in the standards. In this study, needs for the conversion of referenced foreign standards to KS standards are reviewed and the appropriate approaches as to the conversion are suggested.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.27-34
• /
• 2015

If examining utilization by completion of National Competency Standards development, efforts are made so as to organize curriculum matched to education or training and perform subjects based on competence unit educationally in specialized high schools, colleges and university. However, National Competency Standards is insignificantly utilized in enterprises and on the spot due to characteristics of occupation type and diversity of process. This thesis intended to measures of safety efficiency improvement of final enterprise through the human resources assessment system of National Competency Standards based enterprise. Therefore, various methodologies were introduced and results of analysis by Balanced ScoreCard method were suggested for policy measures improving final safety efficiency. The results of this analysis are expected to make contribution to improving the effectiveness of the government's industrial safety and health policies through the establishment of systematic safety and health systems according to the risk level of individual business.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.437-443
• /
• 2014

Electric motors and drives consume the largest amount of electricity more than 40% of global electricity consumption. In addition, motors, drives and its components are included in the global high-trade products and the main driving source for industrial equipment and house appliances. Thus, International standards and regulations for their safety and efficiency are internationally being discussed and created for the protection of its citizens and energy saving. So, understanding the international standards and the regulation of each country is essential to enhance overseas market and to develop product. In this paper, on the basis of this background, status and trends of international standards and regulations are introduced for safety and efficiency of motors and the drives. Safety and efficiency of the IEC (International Electrotechical Commission) standards are introduced in the emphasis. Also, regulations are studied about the differences and trends in each county.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1298-1302
• /
• 2018

Minimum Efficiency Performance Standard (MEPS) has already been operated in many countries. In particular, the European Union (EU) has entered the IE3 stage since 2017. Korea will also enter the IE3 phase from October 2018. As for Korea, there is still a restriction on induction motors only. But, in the EU and the United States, efficiency regulation of variable speed drives is being deeply examined. Standards related to this are gradually being fixed. In this paper, the current status and the direction of global standards related to the efficiency of motors, inverters and systems are reviewed. And the case of improving the efficiency of the system including the motor will be examined.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.407-424
• /
• 2014

Purpose: The purpose of this study was to propose supply chain management efficiency by analyzing moderating effect on the training support project in small and midium-sized enterprise. Methods: The collected data through the survey were analyzed using multi?regression analysis. The measurement tools used for this study were divided into three dimensions such as personal characteristics, supportive environment and training effect. Results: The results of this study are as follows; first, it was found that the effects of personal characteristics and supportive environment were significant on training effect. Second, significant differences were found between supply chain management active group and inactive group. Third, moderating effect of supply chain manage efficiency was found between variables. Conclusion: SME supporting project in training program needs supply chain management efficiency for training effect. Supply chain management needs to be promoted in SMEs not only for performance but also for their workplace learning and learning culture.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.4
• /
• pp.298-312
• /
• 2013

This paper compares efficiency results and performance targets for academic departments in a local private college using DEA (Data Envelopment Analysis). Because of an aging society, a smaller school-age population entering colleges, and enhanced accreditation standards by the government, colleges and universities are not recruiting and retaining sufficient students and therefore are struggling for survival. In contrast to popular four-year undergraduate universities concentrated in Seoul and its satellite cities, retaining students is critical for the survival of local private colleges in poor or remote regions. Therefore, it is very important to identify the factors involved in the retention of students in the various departments of a college. However, given the different characteristics of the departments, it is difficult to identify one unique or robust set of standards to evaluate their performance. The purpose of this paper is to maximize student retention capabilities by ensuring that additional resources are assigned to efficient DMUs, while, inefficient DMUs are given benchmarked targets. Based on previous studies and college accreditation standards, this paper presents indices to be used in evaluating the efficiency of academic departments in a college. In evaluating relative efficiency, this paper uses the output-oriented BCC model. To define target levels to be achieved for efficient DMU, a multi-stage DEA procedure is used.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.548-554
• /
• 1994

The full-energy peak efficiency for a collimated geometry of a Si (Li) detector has been experimentally determined using the electro-deposition sources. The radioactive sources of $^{51}$ Cr, $^{54}$ Mn, $^{57}$ Co and $^{65}$ Zn nuclides are prepared by the electro-deposition method. The measured efficiency values are corrected for the escape losses due to the K X-rays of silicon and the absorptions in materials related to source-to-detector geometry. The corrected efficiency values have turned out to be nearly constant regardless of photon energy.