• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.833-838
• /
• 2008

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of elecrodeless lamp are related to ferrite core and cold spot temperature. Additionally, spectrum, color temperature and coordination are measured to check that is relation with ambient temperature.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.273-278
• /
• 2009

The experimental study is performed to investigate the optimum design of the system dissipating properly heat from the in-situ solar panel installed on site. For this purpose, six 12-Watts panels, which are set at the different conditions of the solar panels contained phase change material, changing the array of the aluminum fin and honeycomb at the back of the panel, are tested. PCM, which has $44^{\circ}C$ melting point, is chosen in this study. In order to enhance the thermal heat from the absorbed heat in PCM, finned aluminum plate is placed. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. As a result, the solar panel, which is combined with honeycomb and outward fins with PCM instead of placing the fine inward, is showing the best performance in terms of controling panel temperature and efficiency.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.2
• /
• pp.10-15
• /
• 2010

The experimental study was conducted to optimize the system dissipating properly heat from the in-situ solar panel installed on the roof. For this purpose, six 12-Watt panels, which were consisted of the different design conditions such as containing phase change material(PCM), changing the array of the aluminum fin and honeycomb at the back of the panel, were tested. PCM, which had $44^{\circ}C$ melting point, was chosen in this study. In order to enhance absorbing and expelling heatin PCM, profiled aluminum fin was placed either inward oroutward from the panel. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. During the experiment, there were ranged to $26^{\circ}C\sim32^{\circ}C$ for outdoor temperature and $700W/m^2\sim1000W/m^2$ for irradiance. As a result, the solar panel, combined with honeycomb and outward fins with PCM instead of placing the fins inward, is showing the best performance in terms of controling panel temperature and its efficiency.

• Journal of Climate Change Research
• /
• v.8 no.1
• /
• pp.63-71
• /
• 2017

It is recognized that tetrafluoromethane ($CF_4$) has a great influence on global warming. The $CF_4$ is known to have a large impact on climate change due to its large global warming index. In this study, a waterjet plasma scrubber (WPS) was designed and manufactured for the $CF_4$ decomposition. The WPS is a novel technology which is combined a gliding arc plasma and water injection at the center of the plasma discharge. This can give an innovative way for $CF_4$ decomposition by achieving larger plasma columnand generating OH radicals. A performance analysis was achieved for the design factors such as waterjet flow rate, total gas flow rate, consumption electric power, and electrode gap. The highest $CF_4$ decomposition and energy efficiencies were 64.8% and 6.43 g/kWh, respectively; Optimal operating conditions were 20 mL/min of waterjet flow rate, 200 L/min total gas flow rate, 5.3 kW consumption electric power, and 4.4 mm electrode gap. As for the 2 stage reactor of the WPS, the $CF_4$ decomposition efficiency improved as the 85.3% while the energy efficiency decreased as the 5.57 g/kWh.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.56-62
• /
• 2019

This study examined effects of the operating characteristics of a pump according to the rotational speed of a pump and the change in flow rate when a centrifugal pump operates under the following conditions: regulated flow rate, head, rotational speed, and specific speed of 0.7 m/min, 8 m, 1750 rpm, an 182 (m, ㎥/min, rpm), respectively. The pump in the experiment did not have a guide vane and was connected directly to the rim, so that the rotational speed of the volute pump in a spiral or volute casing increased by 100 rpm from 1350 to 1750 rpm. The result of the relationship between the H-Q, L-Q, and 𝜂-Q characteristics and the dimensionless performance characteristics, such as the head coefficient, power coefficient and efficiency were studied. The change in pump performance could be estimated depending on the increase in the number of revolutions. The maximum efficiency of the pump was 52% with 1450 rpm, 0.165 ㎥/min flux, and 4.73 m of lift. The efficiency reached 50% with a maximum of 1750 rpm, 0.183 ㎥/min of flux, and 6.72 m of lift. The efficiency curve on the performance characteristics of the lift versus flux curve became oval not a curve from a quadratic equation that passes through the starting point according to the similarity law of the pump. Finally, when the flux coefficient increased, the power coefficient increased and the lift coefficient decreased. When the flux coefficient was 0.08, the maximum efficiency was 52%. Therefore, the change in flux affects the driving characteristics.

• Communications for Statistical Applications and Methods
• /
• v.13 no.3
• /
• pp.491-501
• /
• 2006

We consider a multiple change point model with autoregressive conditional heteroscedasticity (ARCH). The model assumes that all or the part of the parameters in the ARCH equation change over time. The occurrence of the change points is modelled as the discrete time Markov process with unknown transition probabilities. The model is estimated by Markov chain Monte Carlo methods based on the approach of Chib (1998). Simulation is performed using a variant of perfect sampling algorithm to achieve the accuracy and efficiency. We apply the proposed model to the simulated data for verifying the usefulness of the model.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2007.02a
• /
• pp.97-102
• /
• 2007

Currently, many organizations introduce ERP system as a key enabler of business strategic accomplishment and it can improve productivity and efficiency of organizations by integration and managing enterprise resources. Already many organizations have introduced ERP systems and the number of introduced ERP system is increasing steadily. Unfortunately, even though organizations have invested much money, previous studies showed the ERP systems had not always turned in good result. It is easy to find many studies that suggest that successful implementing strategies for ERP systems. This study reviewed the previous literature on strategic use of change management in enterprise. In order to establish a successful implementation of ERP, this paper suggests proper solutions to conduct change management according to implementation phase with activity and output, especially analyzing successful organizations in implementing ERP system through consistent change management.

• Journal of Information Technology and Architecture
• /
• v.10 no.3
• /
• pp.295-303
• /
• 2013

This paper presents a new approach to managing dynamic business process changes based on business process change patterns. We identify and categorize business process change patterns that occur recurrently in a dynamic business environment. Several issues regarding management of process versions are discussed, and a pattern-based version management method for handling process changes more flexibly is explained in detail. We propose a mechanism for abstract process execution with runtime encapsulation of a business process, which can maximize the flexibility of process execution using multiple process versions. In addition, we propose a concept of process promotion and demotion that can dynamically choose an actual version of the process at run-time. With our pattern-based process change management and versioning approach, it is expected that the flexibility and efficiency of BPM systems can be enhanced significantly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.517-529
• /
• 2021

This study analyzes changes in the efficiency of the Department of Early Childhood Education in Korea to examine the effectiveness of the National Evaluation for Teacher Education Institution. We provide policy implications from exploring factors influencing efficiency and comparing characteristics of efficient and inefficient departments. With 149 Department of Early Childhood Education in Korea, DEA was conducted to estimate the relative efficiency, and the Tobit model was applied to explore factors affecting efficiency. The results confirm that the Department of Early Childhood in Korea is run efficiently, though there was no change in scale efficiency and relative efficiency after the two phases of the National Evaluation for Teacher Education Institution. The results show the number of books per student was significantly lower despite a significantly higher employment rate. Efficiency of college departments, department greater than 60 (per cohort), and department in metropolitan city (except Seoul area) is confirmed greater. These results provide policy implications on developing evaluation measure and processes to improve education quality and efficiency.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.195-201
• /
• 2005

This paper presents the measurement of efficiency for container ports. Data envelopment analysis(DEA), as it is called, has particular applicability in the service sector. Applying mathematical programming techniques, DEA enables relative efficiency ratings to be derived within a set of analysed units. This paper investigates the efficiency employing DEA Model on data for 53 container ports covering 1995-2001 in the world and the change in efficiency for 7 years. As a results, port of Busan was evaluated as inefficiency port compare with major ports of the world except 1995year and 1996year. But After 1997year, efficiency of Busan port is increasing somewhat better every year.