• 한국표면공학회지
• /
• 제30권2호
• /
• pp.144-154
• /
• 1997

Effects of plasma nitriding on the surface charcteristice of stainless steel(SS) were investjgated by utilizing wear tester, micro-hardness tester and potentiostat. The surface and corrosion morphology of plasma nitrided SS were analyzed by utilizing optical microscopy, SEM, XRD and WDX. It was found that plasma nitriding at $550^{\circ}C$, compared with $380^{\circ}C$, prodiced a good wear resistance and hardness as nitriding time increased, whereas Mo addition showd that were resistance and hardness decreased. Intergranular corrosion(IGC) resistance improved significantly in the case of plasma nirtrided SS containing 4.05wt% Mo at $380^{\circ}C$ because that nitrogen and Mo ast syner gidically to form a protective layer on surface which is responsible for the aggresive SCN-ion. Plasma nitrided at $550^{\circ}C$ decreased IGC as Mo content increased. Pitting improved in the plasma nitirided SS at Mo content incresased owing to retard a nucleation and growth of chromium carbide or nitirde in grain boundary.

• 열처리공학회지
• /
• 제34권6호
• /
• pp.294-301
• /
• 2021

In the present study, we investigate the effects of long-term heat treatment at elevated temperatures on the mechanical softening of the Mn-Mo-Ni low-alloy steel. The influence of long-term heat treatment on microstructure and mechanical strength was evaluated. To simulate the long-term material degradation, heat treatment test was interrupted at several stages up to 10,000 hours in an electric furnace. The Mn-Mo-Ni low-alloy steel shows a typical bainitic phase, which consists of a well-developed lath substructure with fine precipitates along the lath boundaries. However, these fine precipitates were redissolved into the matrix with long-term heat treatment, and then the lath substructures were recovered. Consequently, ultimate tensile strength and yield strength decreased during long-term heat treatment showing a mechanical softening phenomenon.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권12호
• /
• pp.1654-1660
• /
• 2009

This study was conducted to investigate the effects of different fattening periods i.e. 25, 27 and 29 months of age (25 mo, 27 mo and 29 mo), on feed consumption, body weight gain, carcass parameters, and lipogenic gene expression in 45 Korean native steers (Hanwoo). Daily DM intake was higher in steers on 29 mo compared with those on 25 mo or 27 mo. Daily body weight gain was higher in steers on 25 mo compared with those on 27 mo or 29 mo during fattening and overall experimental periods. Therefore, feed conversion ratio was lower in 25 mo compared with 27 mo or 29 mo during the fattening and whole experimental periods. As expected, slaughter and carcass weights were higher in the order of 29 mo>27 mo>25 mo. Carcass yield grade was relatively lower in 29 mo reflecting higher back fat thickness compared with other treatments, while carcass quality grade was not largely influenced by the treatments. By investigation with an ultra-sound scanning technique, the marbling score was significantly and numerically higher in 25 mo compared with 27 mo or 29 mo. The mRNA levels of stearoyl-CoA desaturase (SCD) gene were gradually increased in the late fattening stages (p<0.01) and mRNA of acetyl-CoA carboxylase (ACC), ATP citrate lyase (ACL) and glucose transporter 4 (GLUT4) gene were highly expressed in 29 mo compared with 25 mo and 27 mo (p<0.05). However, gene expressions of adipocyte fatty acid binding protein 4 (FABP4) and lipoprotein lipase (LPL) were not significantly different among the treatments. Thus the present results indicated that different fattening period has no major effect on carcass characteristics, although 25 mo had a lower carcass weight compared with 27 mo or 29 mo.

• Journal of Magnetics
• /
• 제9권1호
• /
• pp.9-12
• /
• 2004

We have investigated sintering effects on Fe/Mo ordering and magnetoresistance (MR) in double perovskite-reflection lines due to $Sr_2FeMoO_6$ (SFMO). Polycrystalline samples have been prepared by the conventional solid-state reaction by sintering in a stream of 5% $H_2/Ar$ gas. All samples are single phase and exhibit a series of superstructurecation ordering at Fe and Mo sites. As sintering temperature increases from 900 to $1300^{\circ}C$, the degree of Fe/Mo ordering increases from 82 to 92%, magnetization (15 K, 7 kOe) increases from 1.6 to 2.7 ${\mu}_B/f.u.,$ and Curie temperature increases at a rate of 4.3 K/% with the increase of Fe/Mo ordering ratio. The magnitude of MR measured at 5 K is 19% for sample prepared at $1000^{\circ}C$ with magnetic fields of 7 kOe. The observed MR is proportional to the square of magnetization indicating that the MR feature in SFMO is explained by the spin-polarized tunneling at grain boundaries.

• 환경위생공학
• /
• 제16권4호
• /
• pp.1-8
• /
• 2001

We have previously demonstrated that sodium molybdate(Mo) improved lead-intoxicated status by enhancing the metabolism of mao-inositol-related phospholipids in sciatic nerves isolated from rats. In this study, in order to address the reduction mechanism of Mo for lead toxicity, effects of Mo on cystidine-diglyceride transferase, phosphatidylinositol kinase, and phosphatidyl inositol-4-phosphate kinase, involved in mao-inositol metabolism of nerve, were investigated in vivo and in vitro. Mo significantly increased the activities of cystidine- diglyceride transferase and phosphatidylinositol kinase in lead-intoxicated rat, and the pattern of increase was dose-dependent manner. However, Mo did not affect the activity of phosp- hatidylinositiol-4-phosphate kinase in normal and lead-intoxicated rats. We also found that Mo affected the activities of phopholipid metabolism-related enzymes not by the indirect manner such as activation of another metabolic pathway but by the direct manner. These results suggest that the improvement mechanism of Mo for lead-intoxicated status might be a normalization of the activities of phospholipid metabolism-related enzymes in sciatic nerve.

• 전기화학회지
• /
• 제12권3호
• /
• pp.258-262
• /
• 2009

The composition and semiconducting properties of the passive films formed on Ni- (15, 30)Cr-5Mo alloys in pH 8.5 buffer solution were examined. The depth concentration profile of passive films formed on Ni-(15, 30)Cr-5Mo in pH 8.5 buffer solution showed that Mo enhances the enrichment of Cr. The Mott-Schottky plot for the passive film on Ni-(15, 30)Cr- 5Mo closely resembled that for the film on Cr, whereas those for the less Cr-enriched film on Mo-free alloys showed similar behavior to that for the film on Ni. The acceptor density was reduced by increasing Cr content in Ni-(15, 30)Cr-(0, 5)Mo alloys, but addition of Mo considerably increased the acceptor density.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 춘계학술발표 개요집
• /
• pp.94-95
• /
• 1995

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1999년도 제2회 총회 및 춘계학술발표회
• /
• pp.38-38
• /
• 1999

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.173-183
• /
• 1988

Effects of oxide additives such as MoO3, MnO2 ZrO2 and Fe2O3 on the phase separation and the chemical durability of sodium borosilicate glasses which are the host of waste glasses have been investigated as the basic study on the nuclear-waste immobilization through vitrification. MoO3 and MnO2 were found to be phase separation promotors which increased the temperature as well as catalyzed nucleation and growth for the phase separation of the 10Na2-O-3OB2O3-6OSiO2 (wt%) parent glass within the immiscibility region. The glasses had the interconnected phase-separated structure as the amount of addition increased. On the other hand, ZrO2 and Fe2O3 were inhibitors which showed the reverse effects to the above promotors. It was also found that addition of MoO3 could cause the phase separaton of the 20Na2O-10B2O3-70SiO2(wt%) glass even within the miscibility region. Addition of ZrO2 and Fe2O3 increased the chemical durability of the parent glass within the immiscibility region. Within the miscibility region, however, the addition of 1.96 wt % of MoO3 increased the chemical durability considerably, while MnO2 had little effects.

• 한국결정성장학회지
• /
• 제28권6호
• /
• pp.250-255
• /
• 2018

본 연구에서는 3D-프린팅 적층 공정으로 제조한 인공관절용 CoCrMo 합금 소재의 HIP 처리를 포함한 복합열처리 후 소재의 인장특성, 내마모 특성 등의 기계적 특성과 결정구조 및 미세조직 등의 재료특성 변화를 고찰하였다. 내부마이크로 기공을 제거하기 위한 HIP 열처리와 금속탄화물 생성을 위한 상압열처리 및 금속탄화물의 균질화를 위한 용체화 열처리를 거치는 복합열처리 공정을 실시하여 인공관절 소재로서의 특성을 부여하고자 하였다. 3D-프린팅 적층 공정으로 제조한 인공관절용 CoCrMo 합금 소재의 복합열처리 효과는 HIP 공정중의 치밀화 과정, 상압열처리 중의 금속탄화물 생성 및 용체화 열처리 과정중의 금속탄화물의 균질화 효과임을 XRD, FE-SEM, EDS 분석으로 확인하였다.