• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.805-816
• /
• 2015

In the present study, external restraints imposed normal to the plate during the cooling stage were determined to be effective for reduction of the angular distortion of butt-welded or fillet-welded plate. A welding analysis model under external force during the cooling stage was idealized as a prismatic member subjected to pure bending. The external restraint was represented by vertical force on both sides of the work piece and bending stress forms in the transverse direction. The additional bending stress distribution across the plate thickness was reflected in the improved inherent strain model, and a set of inherent strain charts with different levels of bending stress were newly calculated. From an elastic linear FE analysis using the inherent strain values taken from the chart and comparing them with those from a 3D thermal elasto-plastic FE analysis, welding deformation can be calculated.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.396-398
• /
• 2005

At present, fatigue design of welded structures is primarily based on nominal stress or hot spot stress approach with a series of classified weld S-N curves. However, these methods are known to possess drawbacks, such as difficulty associated with defining proper nominal stress and the finite element sue sensitivity etc. Recently, a mesh-size insensitive structural stress definition is proposed by Battelle that gives a stress state at weld toe with relatively large mesh size. The structural stress definition is based on the elementary structural mechanics theory and provides an effective measure of a stress state in front of weld toe. As an experimental validation of the structural stress method in obtaining the fatigue strength of weldments, a series of experiment is carried out for various sizes of weldments. Based on the result from this study, it is expected to develop a more precise fatigue strength evaluation technique and to save time period required in the fatigue design of ship and offshore structures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.90-95
• /
• 2004

In this study, we proposed new method to mitigate tensile welding residual stress for preventing PWSCC in CRDM nozzle. Residual stress analysis using finite element method is performed to confirm benefit of the new method. In case of applying existing method, tensile axial residual stress decrease by about 28% and tensile hoop residual stress decrease by about 33%. In case of applying the new method, tensile axial residual stress decrease by about 32% and tensile hoop residual stress decrease by about 43%. Therefore, we conclude the new proposed method is more effective to prevent PWSCC than existing method.

• 한국재료학회지
• /
• 제33권5호
• /
• pp.205-213
• /
• 2023

This paper reports the results of an experimental examination using X-rays to test annealing materials for lapped bearing steel (STB2), to confirm the validity of the weighted averaging analysis method. The distribution behavior for the α_𝜓-sin²𝜓 diagram and the presence or absence of differences in the peak method, half-value breadth method, and centroid method were investigated. When lapping the annealed bearing steel (STB2) material, a residual stress state with a non-directional steep gradient appeared in the surface layer, and it was found that the weighted averaging analysis method was effective. If there is a steep stress gradient, the sin²𝜓 diagram is curved and the diffraction intensity distribution curve becomes asymmetric, resulting in a difference between the peak method, half-value breadth method, and centroid method. This phenomenon was evident when the stress gradient was more than 2~3 kg/mm²/㎛. In this case, if the position of the diffraction line is determined using the centroid method and the weighted averaging analysis method is applied, the stress value on the surface and the stress gradient under the surface can be obtained more accurately. When the stress gradient becomes a problem, since the curvature of the sin²𝜓 diagram appears clearly in the region of sin²𝜓 > 0.5, it is necessary to increase the inclination angle 𝜓 as much as possible. In the case of a lapping layer, a more accurate value can be obtained by considering 𝜎₃ in the weighted averaging analysis method. In an isotropic biaxial residual stress state, the presence or absence of 𝜎₃ can be determined as the presence or absence of strain for sin²𝜓≈0.4.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.56-61
• /
• 2011

In this study, a series of fatigue tests was conducted to evaluate fatigue strength for the root gap difference with high strength steel with butt welded joints. A finite element analysis using effective notch stress method was also performed to compare effective notch factors each other with butt welded specimens made by copper backing. The results of fatigue tests were classified according to the root gap difference. Fatigue life of butt welded specimens is presented for determining the root gap of high strength steel with butt welded joints in terms of fatigue strength. Then effective notch stress was applied to interpret fatigue strength of butt welded specimen model which is reflected actual measured dimensions. As a result, fatigue strength of high strength steel with butt welded specimens is increased by root gap gets longer in length.

• 대한간호학회지
• /
• 제22권4호
• /
• pp.526-551
• /
• 1992

The purpose of this study was to identify the commonalities of various nursing interventions and effective intervention methods in each intervention through analysis and synthesis of many accumulated research papers. The study analyzed the effects of various nursing interventions on anxiety and /or stress. For this purpose, 64 experimental studies with randomized or nonequivalent control group pre-test-posttest design were selected from journals of medical and nursing schools, the Korean Nurse, the Korean Nurses' Academic Society Journal, the Cetnral Journal of Medicine, the New Medical Journal, the Nurse Monthly, and from theses and dissertations conducted from 1970 to 1991. The selected studies nor classified according to three characteristics : 1) the research samuel, 2) types and methods of nursing interventions, and 3) statistical tests. The following analysis was done : 1) Confirmation of the accuracy of data drawn from each study by paired review, 2) Estimation of the homogenity of pre-test scores of the dependent variable between control and experimental groups warranted the effect size of post-scores, 3) If the homogenity of pre-test scores did not warrant, the change scores from pre-test to post-test were used to estimate the effect size, 4) Use of the effect size of each study among homogenious studies was tested for each intervention method, such as relaxation, information, and touch and /or support. Finally, for the studies not showing homogenity, an ANOVA test was used to identify patterns for each intervention. Some findings are summarized as follow : The effect sizes for relaxation and information were greater than those for touch and /or supportive technique. Studies using random assignment had greater effect sizes than nonrandomized sample studies using the same intervention. For healthy people, group education was more effective than individual teaching. However, for patients, relaxation and touch and /or supportive techniques given on individual basis were more effective than when given in a group situation. Measuring anxiety and stress by biological indicators was less effective than by self-report. Budzynski's relaxation method was the most effective. The more frequently the techniques applied, the larger the effect size. On the bases of these findings, the following recommendations were made : 1. A combination of information, relaxtion, and touch-supportive techniques should be used for greater effect in reducing the level of anxiety and /or stress. 2. Information is the first choice of intervention to reduce the level of anxiety and /or stress of healthy People : other interventions may be added depending on the conditions of the subjects.

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.13-24
• /
• 2011

Terzaghi의 1차원 압밀이론은 준설 매립지반과 같이 고함수비, 고압축성을 갖는 점토지반의 압밀해석에는 적합하지 않다. 준설 매립지반의 자중압밀과 재하하중에 의한 추가압밀을 적절히 고려하기 위해서는 비선형, 유한변형 압밀이론을 도입해야 한다. 준설 매립지반의 비선형 유한변형 압밀해석을 수행하기 위해서는 침강과정이 종료되고 자중압밀이 시작되는 시점의 간극비인 초기간극비($e_{00}$)와 비선형성을 갖는 준설토의 간극비-유효응력 관계와 간극비-투수계수의 관계 규명이 매우 중요하다. 본 연구에서는 실내시험을 통해 비선형 유한변형 압밀해석에 필요한 인자를 산정하는 방법을 제안하였다. 또한, 본 연구에서 제안한 방법을 적용하여 인천지역 준설토와 카올리나이트의 압밀 물성치를 평가하였고, 이를 동반논문에서 다룰 비선형 유한변형 압밀해석에 적용하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.327-335
• /
• 1999

A batch process in which transfer bars are rolled in single bar units involves many problems in terms of quality, yield and threading stability. The endless rolling process is an effective solution to such problems. In this, study, an analysis model is proposed to calculate the distribution of normal stress in endless rolling process. The model was examined by comparing with the result of experiment. A device using the spring is developed for improving the welding quality.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.66-71
• /
• 2003

The release of residual stress by mechanical loading and unloading is often performed in the fabrication of box structure fur steel bridge. The proper degree of loading and unloading is significant at release method of residual stress by mechanical loading because that degree is changed by material and geometric shape of welded structure. Therefore, the simulation model that could exactly analyze the release of residual stress by mechanical loading is to be necessary. In this study, the non-linear behavior of weldments under external loading and unloading, such as the decrease and increase of structure stiffness, was investigated by monitoring of nominal stress and strain. Tensile loading and unloading test and the proper degree of stress relaxation was measured by sectioning technique using strain gauge. Analysis model that is indispensable for the effective application of MSR method was established on the basis of test and measurement result.

• 대한가정학회지
• /
• 제28권4호
• /
• pp.119-133
• /
• 1990

This study attempts to expore factors which influence of stress. Date were obtained from structed interview conducted with 373 men and women who were 60 years over and living in Kyungnam. Data were analyzed through X2, ANOVA, T-TEST, FACTOR ANALYSIS, MULTIPLE REGRESSTION techniques. The results are summarized as follow: 1. Stress of old age were showed over middle level. The domains of stress showed that health problem is first, later life problem is second, trouble of communication is third, dependency problem is fourth, alienation is last(p<.001). 2. Of the variables health status, family type, economic status, self-esteem, mastery were significant with stress(p<.001). 3. Of the variables sex, religious, self-esteem, mastery were significant of used method in coping with stress. 4. The most of effective variables of stress were mastery, health status, self-esteem.