• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3121-3129
• /
• 2009

Conventional marine radar systems utilize pulse radar which is capable of high-power transmissions and is effective for remote detection purposes. A pulse radar is most commonly used on medium or large vessels due to its expensive installation and maintenance costs. I propose the use of a Frequency Modulated Continuous Wave (FMCW) radar system operated at low-power and high-resolution instead of the conventional pulse-radar based system. The transmitted and received signals of the FMCW radar system were theoretically analyzed and radar signal processing design and simulation experiments were performed to detect the range and speed. Intermediate Frequency (IF) signal mixed with virtual transmit and receive signals were generated to perform FMCW radar signal processing simulations where the IF signal underwent noise reduction through a lowpass filter. The maximum frequency was derived through the sample interval of the FFT size instead of using A/D converter. This maximum frequency was used to get the frequency range and frequency speed which were in turn used to calculate the range and speed. The virtual beat frequency generated using MATLAB is utilized to analyze the beat frequency used in the actual FMCW radar system signal processing. The differences in the range and speed of the beat frequency signals are processed and analyzed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.165-174
• /
• 2011

This research aims at the optimal constitution of sensors required to identify the structural shortcoming of roller-coaster. In this research we analyzed the dynamic characteristics of roller-coaster by three dimensional FE modelling, decided on the appropriate location and number of sensors through optimal transducer theory, abstracted the mathematical value of modal features before and after damage on the basis of optimally placed and numbered sensors. and then presented it as a primary information about the basic structure which would be applied to damage estimation. As a target structure, the roller-coater at Seoul Children's Grand Park was chosen and built as a model reduced by one twentieth in size. In order to consider the Kinetics features particular to the roller-coaster structure, we made an exact three-dimensional FE modelling for the model structure by means of Spline function. As for the proper location and number of sensors, it was done by applying EIM and EOT. We also estimated the damage from the combination of strength, flexibility, and model corelation after abstracting the value of modal features. Finally the optimal transducer theory presented here in this research was proved to be valid, and the structural damage was well identified through changes in strength and flexibility. As a result, we were able to present the optimal constitution of sensors needed for the analysis of dynamic characteristics and the development of techniques in dynamic characteristics, which would ultimately contribute to the development of health monitoring for roller-coaster.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.85-92
• /
• 2016

The eight mixes and artificial soil aggregates were prepared for evaluating the practical application of lightweight foamed concrete as soil aggregates. The main parameter was unit binder content ranged between from 100 to $800kg/m^3$. In lightweight foamed concrete, flow, slurry and dried density, and compressive strength at different ages were measured. In Artificial soil aggregates crushed from lightweight foamed concrete, particle size distribution, pH, coefficient of permeability, cation exchange capacity(CEC), and ratio of carbon to nitrogen(ratio of C/N), were measured. The test results showed that flow, slurry and dried density, and compressive strength at different ages of lightweight foamed concrete increased with the increasing of unit binder content. Compressive strength at age of 28, of lightweight foamed concrete with unit binder of more than $500kg/m^3$, was more than 4 MPa. The ammonium phosphate immersion time of more than age of 3, was effective to decrease pH of artificial soil aggregates. In addition, artificial soil aggregates was evaluated as high class in terms of cation exchange capacity(CEC), while satisfied with value of ratio of carbon to nitrogen(ratio of C/N) recommended by landscape specification.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.61-69
• /
• 2013

This research is aimed to evaluate characteristics and dynamic modeling of MR damper for semi-active vibration control. A MR damper of semi-active type was designed and made for the purpose of controlling the vibration of a real-size model structure. Usually a semi-active control system equipped with a MR damper requires a dynamic model which expresses numerical data about the damping capacity and dynamic characteristics generated by a MR damper. To fulfil the requirement, a Power model and a Bingham model were particularly employed among many dynamic models of MR damper. Those models being contrasted with other ones, a dynamic test was carried out on the developed MR damper. In the test, excitation frequencies were conditioned to be 0.15 Hz, 1.0 Hz, and 2.0 Hz, and three different currents were adopted for each frequency. From these test results, it was found that displacement affected control capacity of the MR damper. The test results led to the identification of model variables for each dynamic model, on the basis of which a force-speed relation curve and expected damping force were derived and contrasted to those of the developed MR damper. Therefore, it was proven that the MR damper designed and made in this research was effective as a semi-active controller, and also that displacement of 2mm at minimum was found to be secured for vibration control, through the test using various displacements.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.283-292
• /
• 2016

Conventional fingerprint powders used during crime scene investigations pose potential health hazards. Thus, multiple natural replacement powders, including squid ink powder, indigo and rice powder were used to develop (visualize) latent fingerprints on non-porous surfaces (e.g., glass, plastic and tile). Fingerprints developed using the natural powders were compared using the Automatic Fingerprint Identification System (AFIS) with those developed with traditional black powder. The peak areas of ridges were also compared using densitometric image analyses. Collectively, objective and quantitative evaluation methods were developed. The effectiveness of natural powders varied depending on the surface but, in general, squid ink powder performed well on most surfaces. Indigo powder performed well on tile surfaces, while rice powder performed well on glass surfaces. Plastic was the most difficult surface from which to develop fingerprints. Image analysis using Field Emission Scanning Electron Microscopy (SEM) demonstrated the importance of the size and shape of natural powder particles to properly adhere to the ridges. Although densitometric image analyses did not correlate the number of minutiae and ridge peak areas, an unbiased, objective evaluation method would be possible using image analyses with a reference image. Additional experimentation will yield safe and cost-effective natural powders with which adequate fingerprint development can be performed.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.732-743
• /
• 2008

In H.264/AVC, 4$\times$4 block transform is used for intra and inter prediction instead of 8$\times$8 block transform. Using small block size coding, H.264/AVC obtains high temporal prediction efficiency, however, it has limitation in utilizing spatial redundancy. Motivated on these points, we propose a multi-dimensional transform which achieves both the accuracy of temporal prediction as well as effective use of spatial redundancy. From preliminary experiments, the proposed multi-dimensional transform achieves higher energy compaction than 2-D DCT used in H.264. We designed an integer-based transform and quantization coder for multi-dimensional coder. Moreover, several additional methods for multi-dimensional coder are proposed, which are cube forming, scan order, mode decision and updating parameters. The Context-based Adaptive Variable-Length Coding (CAVLC) used in H.264 was employed for the entropy coder. Simulation results show that the performance of the multi-dimensional codec appears similar to that of H.264 in lower bit rates although the rate-distortion curves of the multi-dimensional DCT measured by entropy and the number of non-zero coefficients show remarkably higher performance than those of H.264/AVC. This implies that more efficient entropy coder optimized to the statistics of multi-dimensional DCT coefficients and rate-distortion operation are needed to take full advantage of the multi-dimensional DCT. There remains many issues and future works about multi-dimensional coder to improve coding efficiency over H.264/AVC.

• Applied Microscopy
• /
• v.42 no.2
• /
• pp.67-76
• /
• 2012

The biomimetic approach on the cuticular spinning nozzles of the major ampullate silk glands in the golden-web spider Nephila calvata has been attempted using various visualizing techniques of light and electron microscopes to improve the design of spinning nozzle for producing synthetic nanofibers spun from electrospinning apparatus. The major ampullate spigot which has the most effective nozzle system to produce nanofibers for dragline silk with high strength and elasticity is connected via the bullet type spigot on anterior spinneret with flexible terminal segment. The excretory duct which transports the liquid silk feedstock from ampulla to spigot is divided into 3 limbs by loops back on itself to form an S-shape morphology that is bundled in connective tissue. Final diameter of the nanofibers at nozzle was dramatically reduced by gradual narrowing of duct cuticle less than 10 times comparing to its original size of funnel region. Moreover, the funnel has a characteristic cuticular organization with porous microstructure which seems to be related to water removal from feedstock of silk precursors. High magnification electron micrographs also reveal the presence of the spiral grooves on the surface of the cuticular intima near the valve which presumed to reduce friction during rapid flow of liquid silk.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.106-110
• /
• 2006

If drugs are made from nanoparticles, their formulations can be more effective than the conventional ones. Especially, water insoluble drugs having low absorption rates into our body could show improvement in their adsorption and bioavailability by decreasing their particle sizes to nanometers. In this study, polyvinylpyrrolidone (PVP) and various sugars were employed as stabilizers for the nanoparticles of a water insoluble drug, Itraconazole. Nanoparticles were successfully produced by the wet slurry process for five days. Then, spray drying converted the aqueous dispersions into dry powders, and the redispersibility of dried nanoparticles into water was investigated. The effects of temperature, pressure, and flow rate were studied to understand the importance of processing variables on redispersibility. It was found in particle size analysis that nanoparticles containing sugars have better redispersibility than those without sugars. Additionally, the mainly spherical morphology of dried nanoparticles was identified by SEM (Scanning Electron Microscopy) and AFM (Atomic Force Microscopy).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.90-96
• /
• 1999

Foliar and physiological characteristics of Schisandraceae plants distributed in Korea were investigated to elucidate differences in growth and the variations of inter and intra species of the plants. For this study, three species of Schisandraceae plants were used; i) Schisandra chinensis, decidious broad-leaved tree, ii) S. nigra, decidious broad-leaved tree, including monoecious, male and female types, ii) Kadsura japonica, evergreen broad-leaved tree. There were no significant differences in leaf length and width among three species, but leaves of Schisandra sp. plants were shorter and wider relative to those of K. japonica. The length of petiole of Schisandra sp. plants was greater than that of K. japonica and the difference was evident between female type of S. chinensis and K. japonica as longer as two times. Schisandra sp. trees showed larger size of stomata, but fewer numbers of stomata, compared with K. japonica. Although substantial changes in leaf morphology were not found in the Schisandraceae plants grown in different environmental conditions, the foliar length of K. japonica was seemed to be increased with increasing an altitude. Chlorophyll contents were also variable in inter and intra species and in, general K. japonica showed higher levels of chlorophyll contents relative to Schisandra sp. plants. K. japonica also showed higher light compensation point(LCP), light saturation point(LSP) and $CO_2$ assimilation rates at LSP, compared with Schisandra sp. trees. However, Schisandra sp. trees showed lower respiration per photosynthesis rates at LSP. The finding suggested that Schisandra sp. trees were acclimated to the growth conditions of lower light intensity with more effective photosynthetic activity. This was also confirmed by the fact that Schisandra sp. plants grown in shading places of a forest demonstrated the elevated rates of net $CO_2$ assimilation under the conditions of low light intensity.

• Journal of the Korean Society for Library and Information Science
• /
• v.24
• /
• pp.139-169
• /
• 1993

The major purpose of this study is to scrutinize and analyze various factors in numerous aspects of two different library systems for the visually handicapped, namely braille library and a special section for the visually handicapped in the public library system. The analyses may provide theoretical and conceptual framework on which strategies to enhance services for the visually handicapped is to be developed. More specifically, this study seeks (1) to examine a linkage between the degree of maintenance of staffs, collections, and equipment and the level of satisfactions of librarians and (2) to come up with more effective mechanisms of welfare services for the visually handicapped in each library system. This research is qualitative-descriptive and uses interview method. Fourteen libraries throughout the nation (4 public libraries with a reading room for the visually handicapped and 8 braille libraries) which had been in operation more than one year were selected as subjects for the research. Findings and results of the analyses are summarized as follows : 1. There seems to be general consensus that each of public and braille library has significant but, to a certain extent, different roles to play in order to enhance library services for the visually handicapped. Recruitment of qualified librarians, increase of the volume of collection, and enlargement of reading room space are noted as immediate concerns for the former. For the latter, it was suggested that increase of the number of staff for publishing, securing more equipments for pulication in braille, and wider scope as well as more variety of publications are the pressing problems at hand. 2. Both public and braille library employ one librarian for the visually handicapped who is required to have educational background in library science and special education. In addition, one must have competence in reading braille types. 3. Majority of reading rooms in those libraries is so small in physical aspect that size and number of seats are 66m2 and 15 seats respectively because circulation services are mainly in use due to the problem of inaccessibility which is commonly suffered by the visually handicapped. 4. Library services for the visually handicapped are heavily concentrated upon the large urban area. In fact, most of braille libraries are located in Seoul whereas a reading room for the visually handicapped in the public library system are exclusively placed in the large cities such as Inchon, Taejon, and Taegu. 5. All of the public library is neither equipped with necessary facilities to publish in braille nor secured supporting instruments which may facilitate library use for the visually handicapped. On the contrary, most of braille libraries are equipped with arrangements to publish in braille despite supporting devices are gererally lacking. 6. Consequently, provision of services In the public library is largely confined to reading and circulation of materials purchased from braille libraries while major task of braille libraries centers around publication and distributions of the reading materials in braille.