• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.223-223
• /
• 1996

Effects of Panax ginseng were tested on morphine-and steroids-induced immunosuppression, focusing on mechanism and identification of active components. To investigate overall effects of morphine and ginseng total saponin (GTS) on immune system, body weight and lymphoid organ weight were measured. Morphine significantly reduced body weight, spleen/body weight, and thymus/body weight ratio. GTS, at 100mg/kg (oral), restored spleen/body weight ratio. Because morphine is known to increase corticosterone level, serum corticosterone level was measured by radioimmunoassay. Serum corticosterone was increased by morphine and it was restored to the control level by GTS 100mg/kg (oral). In vitro proliferation studies were also conducted to study the effects of ginseng on steroids-induced immunosuppression. While ginsenoside Rg$_1$ and ginseng alkaloids were effective on proliferation and dexamethasone-induced death of thymocytes, 50% ginseng ethanol extract and polysaccharides were effective on splenocytes. In vivo mprohine-induced apoptosis of thymus was partly protected by GTS.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3833-3839
• /
• 1975

The object of this experiment is to find out some flow characteristics of water through sand layer, to prevent moving sands in the filters of the fill Dam, infiltration gallery, well and Deversion Weir. This experiment was accomplished with different particle Sizes of Six Samples and different hydraulic gradient. The results obtained are Summarized as follows. 1. The critical hydraulic gradients for laminar flow was found to be between 1 and 2 when the sand used had the effective diameter, D10 of between 0.18cm and 0.45cm. 2. The critical hydraulic gradients for different particle sizes of sands were varied considerably. 3. There was a negative correlation between critical hydraulic gradient and critical Velocity, and between effective particle diameter D10 and critical hydraulic gradient respectively. 4. In spite of relatively small variation of void ratio of sands used, the values of the coefficient of permeability varied considerably. There was a negative correlation between coefficient of permeability and void ratio.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.172-176
• /
• 1970

This research dealt with the nutrient value of the seaweed, Sargessum horneri (Turner) C. Ag. which showed the highest nutrient value in the previous exporiment (Park 1968). Its objective was to find the most effective mixing ratio of ordinary chicken feed used for pullet. In order to investigate the most effective mixing ratio, seven kinds of sample feed with vary-ing amounts of the seaweed as shown in table 2 were prepared and were fed to seven groups of chickens, each group consisting of twenty, four week old, pullets. In addition, the effect of sodium glutaminate mixed in the feed was also investigated, and the following result was obtained. The average increase in body weight of each group during the experiment period was determined. The group fed with the feed containing $10\%$ powdered Sargassum horneri (Turner) C. Ag. showed the highest body weight increase. In this experiment the body weight increase was accelerated by mixing $0.5\%$ sodium glutaminate In the above feed.

• Steel and Composite Structures
• /
• v.16 no.5
• /
• pp.481-489
• /
• 2014

The function of carbon fibre reinforced polymer (CFRP) reinforcement in increasing the ductility of reinforced concrete (RC) deep beam is important in such shear-sensitive RC member. This paper aims to investigate the effect of CFRP-strengthening on the energy absorption of RC deep beams. Six ordinary RC deep beams and six CFRP-strengthened RC deep beams with shear span to the effective depth ratio of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were tested till failure in this research. An empirical relationship was established to obtain the energy absorption of CFRP-strengthened RC deep beams. The shear span to the effective depth ratio and growth of energy absorption of CFRP-strengthened deep beam were the significant factors to establish this relationship.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.645-650
• /
• 2000

In the prestressed concrete structures, the effective prestressing force of tendon is basically most important item for structural safety and serviceability. The frictional loss is one of the major items for determinating the effective prestressing force and depend on the construction accuracy of the structures. In this thesis, it will be analyzed and found through measured hydraulic jack pressure, tendon elongation and prestressing control system that the tendancy of apparent curvature friction coefficient, the ratio of jacking force and required prestressing force, the ratio of initial jacking force and required prestressing force and compatibility of specified friction loss coefficient. The specified control limit for curvature friction coefficient of prestressing control system is about 0.25 and wobble friction coefficient 0.005. Thus, the control limit should be modified according to changed vale of friction coefficient.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.2
• /
• pp.47-53
• /
• 1980

Kikukawa-Compliance method using a conventional clip-on gauge was employed to investigate fatigue crack growth and crack closure in 2017-T3 aluminum alloy. The crack growth rate plot against stress intensity range .DELTA.K on a log-log diagram exhibits a bilinear form with a transition at the growth rate of 10$\^$-4/ mm/cycle. The bilinear form appears still in the plot of growth rate versus effective stress intensity range .DELTA.K$\_$eff/. Fatigue crack growth rate could be well represented by .DELTA.K$\_$eff. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor K$\_$max/, but the stress ratio R does not affect U. The crack opening stress intensity factor K$\_$op/ tends to increase with increasing K$\_$max/ and decrease with increasing .DELTA.K.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.54-61
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 aluminum alloy for small tensile overload under high-low block loading condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investigated by compliance method. The applied initial stress ratios are R=-0.5 R=0.0 and R=0.25 Crack length, effective stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc, are inspected with fracture mechanics estimate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1862-1867
• /
• 1999

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1124-1134
• /
• 2016

The tone reservation method is one of the most effective pre-distortion methods for peak-to-average power ratio reduction in orthogonal frequency division multiplexing (OFDM) systems. Its direct application to OFDM systems with offset quadrature amplitude modulation (OQAM) is, however, not effective. In this paper, two novel TR-based methods are proposed, specifically designed for OFDM/OQAM systems by taking into consideration the overlapping nature of OQAM signals. These two methods have different approaches to the generation of the peak-cancelling signal. The first one (overlapped scaling tone reservation) generates the peak-cancelling signal using a least squares approximation algorithm with possible adjacent symbol overlap; the second one (multi-kernel tone reservation) generates the peak-cancelling signal by using multiple impulse-like time domain kernels. It is shown by simulation that, when used in OFDM/OQAM systems, the proposed methods can provide better performance than the direct application of the existing controlled clipping tone reservation method, and even outperform the multi-block tone reservation method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.124-130
• /
• 2015

In many inventory situations, items for sales are generally stocked in a multiple of variations called stockkeeping units, such as size, color, style, and so on. For better management performance on sales items, proper and effective management is necessary for the stockkeeping units. In dealing with many items and those stockkeeping units, individual inventory analysis for each stockkeeping unit needs large amount of time or cost. Also the individual approach in inventory planning increases the demand variation of an item as the result by combining of demand variations of all stockkeeping units, accordingly the inventory turnover ratio and profitability are dropped down. This research suggests an effective method of systematic control of total stockkeeping units by generating from the total item basis, and shows how to reduce the safety stock and the average inventory with attaining a planned customer fill rate of the item and each stockkeeping units.