• Journal of Korea Water Resources Association
• /
• v.52 no.7
• /
• pp.451-461
• /
• 2019

The dam reservoir inflow prediction is utilized to ensure for water supply and prevent future droughts. In this study, we predicted the dam reservoir inflow and analyzed how seasonal weather forecasting affected the accuracy of the inflow for even multi-purpose dams. The hindcast and forecast of GloSea5 from KMA were used as input for rainfall-runoff models. TANK, ABCD, K-DRUM and PRMS models which have individual characteristics were applied to simulate inflow prediction. The dam reservoir inflow prediction was assessed for the periods of 1996~2009 and 2015~2016 for the hindcast and forecast respectively. The results of assessment showed that the inflow prediction was underestimated by comparing with the observed inflow. If rainfall-runoff models were calibrated appropriately, the characteristics of the models were not vital for accuracy of the inflow prediction. However the accuracy of seasonal weather forecasting, especially precipitation data is highly connected to the accuracy of the dam inflow prediction. It is recommended to consider underestimation of the inflow prediction when it is used for operations. Futhermore, for accuracy enhancement of the predicted dam inflow, it is more effective to focus on improving a seasonal weather forecasting rather than a rainfall-runoff model.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.41-51
• /
• 2019

With the aging of the population and the slowdown of the job market, elderly workers make up a large portion of the construction workforce. Also, due to the nature of the construction industry, where outdoor work is frequent, the weather has a more sensitive impact on elderly workers than on younger ones. The study aims to analyze the degree of weather risks exposed to elderly workers in the construction industry using the measure of work loss days. To that end, construction accidents that affected 28,514 elderly workers in seven cities from 2012 to 2016 (a total of 12,789 days) were analyzed to calculate work loss days per different weather factors. The results show that the elderly workers were seriously affected when the temperature was between $-12^{\circ}C$ and $-10^{\circ}C$, humidity between 55% and 60%, precipitation between 128mm and 181mm, and wind speed between 5.5m/s and 6.5m/s, with the highest work loss days. The combined effects between the weather factors were also analyzed to identify the conditiosn that leaded to high work loss days of elderly workers. This study contributes to effective safety management and pleasant working environment between weather factors and shedding light on the relationship between weather factors and work loss days of elderly workers.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.40-48
• /
• 2021

BACKGROUND: Although the calcined oyster shell can be used as a calcium-rich adsorbent for phosphate removal, information about it is limited. The purpose of this study was to evaluate the phosphate adsorption characteristics and its mechanism using calcined oyster shells. METHODS AND RESULTS: In this study, calcined oyster shell (C-OS600) was prepared by calcining oyster shells (P-OS) at 600℃ for 20 min. Phosphate adsorption by C-OS600 was performed under various environmental conditions. Phosphate adsorption by C-OS600 occurred rapidly at the beginning of the reaction, and the time to reach equilibrium was less than 1 h. The optimal isotherm and kinetic models for predicting the adsorption of phosphate by C-OS600 were the Langmuir isotherm and pseudo-second order kinetic model, respectively, and the maximum adsorption capacity derived from the Langmuir isotherm was 68.0 mg/g. The adsorption properties of phosphate by C-OS600 were dominantly influenced by the initial pH and C-OS600 dose. In addition, SEM-EDS and FTIR analysis clearly showed a difference in C-OS600 before and after phosphate adsorption, which proved that phosphate was adsorbed on the surface of C-OS600. CONCLUSION: Overall, the calcined oyster shell can be considered as an useful and effective adsorbent to treat wastewater containing phosphate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.2
• /
• pp.204-211
• /
• 2023

This study investigated the physicochemical properties and palatability-enhancing effects of the alcohol precipitate, in the enzymatic extracts of Sargassum confusum C. Agardh (SC), obsained using the crude enzyme of Shewanella oneidensis PKA 1008. We analyzed the oligosaccharides recovered from the alcohol precipitate using a thin-layer chromatography for SC-degrading extracts, pH, color, reducing sugar, and viscosity. Thin-layer chromatography showed that after treating with the crude enzyme for 60 h, the polysaccharides were degraded into tetramers, dimers, and trimers and pH increased in the alcohol precipitate (EtOH Sedi). In terms of color, the redness and yellowness of alcohol precipitate/supernatant (EtOH Sedi+Super) and the brightness of EtOH Sedi were the highest among enzyme treated for 0 h and 60 h, EtOH Sedi, and EtOH Sedi+Super. In the reducing sugar analysis, EtOH Sedi showed the lowest value of 13.63 ㎍/mL, and the lowest viscosity of 1.13. In terms of the sensory evaluation, EtOH Sedi+Super showed the highest value with respect to the overall preference. These results suggest that the crude enzyme of S. oneidensis PKA 1008 is effective at degrading polysaccharides, and its recovery increases the palatability of the alcohol precipitate.

• Journal of Korea Water Resources Association
• /
• v.56 no.6
• /
• pp.393-402
• /
• 2023

Drought, which has been increasing in frequency and magnitude due to recent abnormal weather events, poses severe challenges in various sectors. To address this issue, it is important to develop technologies for drought monitoring, forecasting, and response in order to implement effective measures and safeguard the ecological health of aquatic systems during water scarcity caused by drought. This study aimed to predict water quality fluctuations during drought periods by integrating the watershed model HSPF and the water quality model QUAL-MEV. The researchers examined the SPI and RCP 4.5 scenarios, and analyzed water quality changes based on flow rates by simulating them using the HSPF and QUAL-MEV models. The study found a strong correlation between water flow and water quality during the low flow. However, the relationship between precipitation and water quality was deemed insignificant. Moreover, the flow rate and SPI6 exhibited different trends. It was observed that the relationship with the mid- to long-term drought index was not significant when predicting changes in water quality influenced by drought. Therefore, to accurately assess the impact of drought on water quality, it is necessary to employ a short-term drought index and develop an evaluation method that considers fluctuations in flow.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.25-40
• /
• 2007

Excessive earth pressure is one of the major mechanical factors in the deformation and damage of Cut-and-Cover Tunnel lining in shallow tunnels and portals of mountain tunnels (Kim, 2000). Excessive earth pressure may be attributed to insufficient compaction and consolidation of backfill material due to self-weight, precipitation and vibration caused by traffic (Komiya et al., 2000; Taylor et al., 1984; Yoo, 1997). Even though there were a lot of tests performed to determine the earth pressure acting on the tunnel lining, unfortunately there were almost no case histories of studies performed to determine remedial measures that reduce differential settlement and excessive earth pressure. In this study the installation of geotextile mat was selected to reduce the differential settlement and excessive earth pressure acting on the cut-and-cover tunnel lining. In order to determine settlement and earth pressure reduction effect (reinforcement effect) of geotextile mat reinforcement, laboratory tunnel model tests were performed. This study was limited to the modeling of rigid circular cut-and-cover tunnel constructed at a depth of $1.0D\sim1.5D$ in loose sandy ground and subjected to a vibration frequency of 100 Hz. Model tests with varying soil cover, mat reinforcement scheme and slope roughness were performed to determine the most effective mat reinforcement scheme. Slope roughness was adjusted by attaching sandpaper #100, #400 and acetate on the cut slope surface. Mat reinforcement effect of each mat reinforcement scheme were presented by the comparison of earth pressure obtained from the unreinforced and mat reinforced model tests. Soil settlement reduction was analyzed and presented using the Picture Analysis Method (Park, 2003).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.1-10
• /
• 2024

In this study, a quercetin benton gel (QUERPLEX) that stabilized quercetin was prepared using organo hectorite, and its efficacy was confirmed. In addition, a comparative study was conducted on the stability and effectiveness of applying this to sunscreen cosmetics. It was confirmed that QUERPLEX remained stable without showing crystal precipitation and growth for 4 weeks. As a result of measuring antioxidant activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH), it showed antioxidant activity depending on the concentration, and showed a radical elimination ability of 70% or more at a concentration of 2,500 ppm or more, confirming a significant effect. Anti-inflammatory activity experiments using RAW 264.7 cells confirmed that NO production decreased in a concentration-dependent manner by reducing NO production by 8% at 25 ㎍/mL, 23% at 50 ㎍/mL, and 84% at 100 ㎍/mL. As a result of confirming the stability of the formulation according to the method of quercetin in the sunscreen formulation, the stability of the formulation was improved when quercetin was added directly to the formulation. It also improved the UV protection index on in vitro and in vivo, which is expected to have the potential as a component that can have a new boosting effect on UV protection. These results suggest that organo hectorite is very effective as a quercetin carrier and that it can be applied in cosmetic formulations by not only expressing the efficacy of quercetin but also bringing about additional effects.

• Korean Journal of Environment and Ecology
• /
• v.37 no.6
• /
• pp.450-463
• /
• 2023

The objective of this study is to derive the core habitat of the Kirengeshoma koreana Nakai utilizing Habitat Suitability Index (HSI) and Maximum Entropy (MaxEnt) models. Expert-based models have been criticized for their subjective criteria, while statistical models face difficulties in on-site validation and integration of expert opinions. To address these limitations, both models were employed, and their outcomes were overlaid to derive the core habitat. Five variables were identified through a comprehensive literature review and spatial analysis based on appearance coordinates. The environmental variables encompass vegetation zone, forest type, crown density, annual precipitation, and effective soil depth. Through surveys involving six experts, importance rankings and SI (Suitability Index) scores were established for each variable, subsequently facilitating the creation of an HSI map. Using the same variables, the MaxEnt model was also executed, resulting in a corresponding map, which was merged to construct the definitive core habitat map. Out of 16 observed locations of K. koreana, 15 were situated within the identified core habitat. Furthermore, an area historically known to host K. koreana but not verified in the present, Mt. Yeongchwi, was found to lack a core habitat. These findings suggest that the developed models exhibit a high degree of accuracy and effectively reflect the current ecological landscape.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.169-177
• /
• 2014

BACKGROUND: The ferronickel and rapid cooling slags used in present study are industrial wastes derived from a steel factory in Korea. These slags are used as almost road construction materials after magnetic separation. However, the use of slag to remove phosphorus from wastewater is still a relatively less explored. The objective of this work was to evaluate the feasibility of ferronickel slag (FNS) and rapid cooling slag (RCS) as sorbents for phosphorus removal in wastewater. METHODS AND RESULTS: Adsorption experiments were conducted to determine the adsorption characteristics of the FNS and RCS for the phosphorus. Adsorption behaviour of the phosphorus by the FNS and RCS was evaluated using both the Freundlich and Langmuir adsorption isotherm equations. FNS and RCS were divided into two sizes as effective sizes. Effective sizes of FNS and RCS were 0.5 and 2.5 mm, respectively. The adsorption capacities (K) of the phosphorus by the FNS and RCS were in the order of RCS 0.5 (0.5105) > RCS 2.5 (0.3572) ${\gg}$ FNS 2.5 (0.0545) ${\fallingdotseq}$ FNS 0.5 (0.0400) based on Freundlich adsorption isotherm. The maximum adsorption capacities (a; mg/kg) of the phosphorus determined by the Langmuir isotherms were in the order of RCS 0.5 (3,582 mg/kg) > RCS 2.5 (2,983 mg/kg) > FNS 0.5 (320 mg/kg) ${\fallingdotseq}$ FNS 2.5 (187 mg/kg). RCS 0.5 represented the best sorbent for the adsorption of phosphorus. In the experiment, the Langmuir model showed better fit with our data than the Freundlich model. CONCLUSION: This study indicate that the use of RCS in constructed wetlands or filter beds is a promising solution for phosphorus removal via adsorption and precipitation mechanisms.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.60-68
• /
• 2015

The study of waste activated sludge (WAS) solubilization has been increased for sludge volume reduction and enhancing the efficiency of anaerobic digestion. Microwave (MW)-assisted solubilization is an effective method for the solubilization of WAS because this method can lead to thermal, nonthermal effect and ionic conduction by dielectric heating. In this study, the solubilization of WAS by MW heating and conductive heating (CH) was compared and to enhance the MW-assisted solubilization of WAS at low MW output power, chemical agents were applied such as $H_2SO_4$ as the strong acid and $CaCl_2$, NaCl as the ionic materials. Compared to the COD solubilization of WAS by CH, that by MW heating was approximately 1.4, 6.2 times higher at $50^{\circ}C$, $100^{\circ}C$, respectively and the highest COD solubilization of WAS was 10.0% in this study of low MW output power condition. At the same MW output power and reaction time in chemically agents assisted experiments, the COD solubilization of WAS were increased up to 18.1% and 12.7% with the addition of $H_2SO_4$ and NaCl, however, that with the addition of $CaCl_2$ was 10.7%. This result might be due to the fact that the precipitation reaction occurred by calcium ion ($Ca^{2+}$) and phosphate ion (${PO_4}^{3-}$) produced in WAS after MW-assisted solubilization. In this study, $H_2SO_4$ turned out to be the optimal agent for the enhancement of MW efficiency, the addition of 0.2 M $H_2SO_4$ was the most effective condition for MW-assisted WAS solubilization.