• 대한토목학회논문집
• /
• 제28권4D호
• /
• pp.469-476
• /
• 2008

최근 밀도 높은 도시재생사업이 활발해지고 그에 따른 교통문제에 대한 우려가 커지면서 TOD사업이 관심을 끌고 있다. 본 논문의 목적은 TOD형 고밀개발이 교통에 미치는 영향을 추정해 봄으로써 TOD형 고밀개발의 효과와 문제점을 파악하는데 있다. 보다 구체적으로는 두 개의 역이 교차하는 교차역세권인 강남구청 역세권 주변 반경 400m 구간을 사례지역으로 선정하여 구체적인 개발시나리오를 작성한 뒤, 초고밀 주택을 건설했을 때 교통량, 승용차통행거리, 시간, 수단분담율, 주변지역 통행속도 등의 제반 교통여건이 좋다는 사실을 밝히고자 하는 것이다. 분석결과 강남구 전체에서 1개의 역세권 개발에 불과하지만 강남구 전체적으로 교통환경에 의미있는 긍정적 영향을 미치는 것으로 나타났다. 역세권 고밀개발시 주변의 교통량은 증가하지만 강남구 전체적으로는 감소하는 것으로 나타났고, 통행시간과 거리가 감소되어 교통환경이 개선되는 것으로 나타났다. 더욱이 주차장 공급이 규제될 때 개선효과는 보다 가시적인 것으로 분석되었다. 통행속도 측면에서 볼 때 두 개의 안 모두 속도가 4.1% 가량 증가되는 것으로 나타났지만 주차장공급제한으로 인한 개선효과는 가로의 속도에는 구체적으로 반영되지 않은 것으로 분석되었다. 이와 같이 이유는 개선된 교통상황을 이용하기 위해 새로이 진입하게 되는 유발교통량 때문일 것으로 판단된다. 수단분담의 경우 미래의 교차역세권이기 때문에 고밀개발에 따른 승용차감축 및 지하철 수단 분담율 개선 효과는 비교적 크게 나타났다. 특히 주차장 공급관리가 시행될 때 지하철 이용비율은 2배이상 증가하는 것으로 나타나 주차장공급규제와 지하철 이용은 밀접한 연관관계에 있음을 알 수 있다.

• 대한기계학회논문집B
• /
• 제39권7호
• /
• pp.567-578
• /
• 2015

Leidenfrost 온도 이상으로 가열된 벽면과 충돌하는 액적의 속도가 열전달 특성에 미치는 영향에 관한 실험 연구를 수행하였다. 동기화된 초고속 가시화 카메라와 적외선 카메라를 이용하여 벽면과 충돌하는 액적의 충돌 특성과 충돌면의 온도 분포를 측정하였다. 획득한 표면온도 분포를 충돌면의 경계 조건으로 이용하여 가열 벽면의 3차원 비정상 열전도 수치해석을 통해 표면 열유속 분포를 얻었다. 수직방향 충돌속도가 증가할수록 최대 액막 직경이 증가하고 가열 벽면과 액막 사이에 존재하는 증기막의 두께가 감소하여 열전달 효율이 증가하였다. 액적은 웨버수가 30보다 작은 경우 되튐현상이 발생하였으며, 큰 경우 작은 액적들로 분쇄되어졌다. 충돌속도에 의한 열전달량의 증가 경향이 되튐영역에서 분쇄영역에서 가면서 약화되었으며, 이는 분쇄현상에 의해 유효 열전달 면적의 확대 효과가 저감되었기 때문으로 해석된다.

• 한국철도학회논문집
• /
• 제14권5호
• /
• pp.433-441
• /
• 2011

한글초록은 기존선 고속화의 여러 대안 중 선로의 직 복선화 및 신선 건설에 의한 기존철도의 고속화는 시간단축 효과나 선로용량 증대의 폭은 크지만 막대한 투자 재원이 소요된다. 이에 비해 기존선을 그대로 사용하면서 속도를 향상하기 위해 선형개량 및 준고속 틸팅열차의 투입은 기존 인프라를 이용함으로서 보다 경제적이며 실용적이라는 장점이 있다. 하지만, 틸팅열차의 경우 기존열차와는 주행 메카니즘이 다르기 때문에 주행 안전성을 확보하기 위해서는 기존에 부설되어 있는 궤도노반의 성능평가가 선행되어야 한다. 또한 열차주행에 따라 발생하는 노반의 침하는 궤도틀림이나 열차의 탈선 등을 유발할 수 있으므로 틸팅열차 주행에 의해 발생하는 궤도 부담력에 따른 노반의 거동 특성을 분석할 필요가 있다. 본 연구에서는 현장계측을 통해 틸팅열차의 기존선 주행속도별(120~180km/h) 주행안전성과 노반성능을 평가하였다. 모든 주행속도에서 탈선계수와 윤중감소율 허용한계치를 만족하였으며, 또한 노반성능 면에서는 기존 운행 고속열차(KTX)에 비하여 작은 노반응답(노반압력, 노반침하, 노반진동가속도)을 보였다. 이러한 계측 결과를 기반으로, 기존열차와 혼용 투입될 틸팅열차는 본 연구의 계측대상 노선과 동일한 성능수준의 궤도노반에서는 최고운영속도(180km/h)에서 안전한 주행이 가능할 것으로 판단된다.

• 한국콘텐츠학회논문지
• /
• 제5권4호
• /
• pp.11-19
• /
• 2005

정보기술이 발달하면서 IT 환경은 생활전반에 걸쳐 큰 변화를 주고 있다. 또한 산업체의 비즈니스 방식과 업무 수행 방식을 빠른 속도로 바꾸어 놓고 있다. 본 논문에서 제안하는 시스템은 웹을 기반으로 기존 IT 개발 및 운영 업무의 프로세스를 개선하여 생산성 및 효율을 극대화하기 위해 기존의 개발 및 운영에서 얻어진 많은 소스코드, 실행 파일과 오브젝트를 프로젝트팀간에 공유할 수 있는 환경을 지원한다. 변경요구에 따른 기존 프로그래밍 소스의 수정과 개발시 이루어지는 영향력 평가를 통하여 장애발생요인을 최소화하고 이력관리를 통한 장애원인 추적을 지원한다 또한 프로젝트 팀간의 기존 소스 및 실행파일의 수정 및 개발 이력을 웹상에서 공유하기 적합한 XML 형태로 변환하여 관계형 데이터베이스에 저장한다. 본 논문은 기존 시스템 개발 환경에서 어플리케이션의 수정 및 개발 행위에 대한 공용성과 가변성을 분석하여 영향을 평가하고 변화관리를 함으로써 보다 효율적인 IT 개발을 제공하는 시스템에 관한 연구이다.

• 환경영향평가
• /
• 제16권1호
• /
• pp.1-13
• /
• 2007

This study was carried out to estimate the emission reduction rates for the regional allowable emissions by special measures to achieve the target air quality in Seoul Metropolitan Area (SMA). A modeling system was designed to validate the details in enforcement regulations set up by local governments based on the current status and plans for air quality improvement. Modeling system was composed of meteorological model (MM5), emission model (SMOKE), and air quality model (CMAQ). Predicted results by this system show quiet well not only daily air pollutants concentration but also the tendencies of wind direction, wind speed and temperature. To achieve the target air quality in Seoul Metropolitan Area (SMA), emission allowances are estimated by seasons and regions. Referring to the base year 2002, it was estimated that emission reduction rates to achieve the intermediate goal in 2007 were 14.2% and 16.6% for NOx and $PM_{10}$, respectively. It was also estimated that 52% of NOx and 48% of $PM_{10}$ reductions from the base year 2002 would be required to accomplish the air quality improvement goal of 22 ppb for $NO_2$, and $40mg/m^3$ for $PM_{10}$ in year 2014. To improve $NO_2$ and $PM_{10}$ concentration through emissions reduction policies, it was found that emissions reduction for the on-road mobile sources would be the most effective in SMA.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2002년도 제20회 동계학술발표회 논문집
• /
• pp.133-149
• /
• 2002

This study aims to investigate the impact of wide use of digital technology, in particular, the Internet, on innovation process and corporate strategy in electronics industry. The introduction of digital technology has changed innovation process, business model and organizational structure of the electronics companies. With the introduction of digital technology, the entire value chain of electronics industry from procurement, sales, and marketing to R&D and manufacturing has been restructured. E-commerce has been a major agenda for e-business. Recently, collaboration among electronics companies through e-marketplace has emerged as an important issue. A web-based e-commerce standard, so called RosettaNet, has been developed for facilitating e-transactions of electronics firms. The development of digital technology has dramatically increased the processing speed and sophisticated the virtual reality technology. As simulation becomes easier and more effective, the uncertainty and risk involved in R&D has decreased significantly. Another positive impact is closer cooperation between R&D and manufacturing functions. Taking advantage of automated and flexible production technology, has a new type of firm, so called, EMS (Electronics Manufacturing Services) emerged, whose strategic focus is on manufacturing only. The EMS can be seen as a kind of innovative organization, that is, a modular organization for production function. Digital technology has made convergence of computer and communication possible at early years but right now the convergence has been accelerated in extensive areas of communication, broadcasting, information appliances, software, contents, and services. Firms' effort for an innovative product and service has been intensified and the competition for a new standard product and service has become severe in electronics industry. Business activities are always realized in a specific organizational context. Accordingly building up innovation-friendly organization has emerged as a critical concern. Due to the striking decrease of transaction cost, a network type of organization has proliferated, and a business function turns into a modular organization. As a whole, digital technology has pushed electronics firms into developing their own business model, which takes consideration of standardization of business platform and their core competency.

• Safety and Health at Work
• /
• 제10권2호
• /
• pp.219-223
• /
• 2019

Background: Ice cooling vests can cause tissue damage and have no flexibility. Therefore, these two undesirable properties of ice cooling vest were optimized, and the present study was aimed to compare the impact of the optimized ice cooling vest and a commercial paraffin cooling vest on physiological and perceptual strain under controlled conditions. Methods: For optimizing, hydrogel was used to increase the flexibility and a layer of the ethylene vinyl acetate foam was placed into the inside layer of packs to prevent tissue damage. Then, 15 men with an optimized ice cooling vest, with a commercial paraffin cooling vest, and without a cooling vest performed tests including exercise on a treadmill (speed of 2.8 km/hr and slope of %0) under hot ($40^{\circ}C$) and dry (40 %) condition for 60 min. The physiological strain index and skin temperature were measured every 5 and 15 minutes, respectively. The heat strain score index and perceptual strain index were also assessed every 15 minutes. Results: The mean values of the physiological and perceptual indices differed significantly between exercise with and without cooling vests (P < 0.05). However, the difference of the mean values of the indices except the value of the skin temperature during the exercises with the commercial paraffin cooling vest and the optimized ice cooling vest was not significant (P > 0.05). Conclusions: The optimized ice cooling vest was as effective as the commercial paraffin cooling vest to control the thermal strain. However, ice has a greater latent heat and less production cost.

• 한국운동역학회지
• /
• 제22권4호
• /
• pp.421-428
• /
• 2012

The purpose of this study was to verify the effects of developed assisting wear which maximize trunk(back) muscle's stretch-shortening effect during backswing and downswing for increasing golf ball carrying distance. Design and fabrication of assistive wear were performed based on the results of analyzed data of trunk EMG activity from the golf drive swings of elite professional male golfers during back swing and downswing phases. After the prototype of wear was produced, surface EMG and Flight scope tests were conducted to verify the effectiveness of the wear for increasing distance to the professional golfers. Results indicated that wearing trial showed significant longer carry distance than the non-wearing trial(p<.001). The carry distance of wearing trial showed an average 229 m compared to the non-wearing trial, the average 225 m. The swing with wearing also produced significantly faster ball speed than the trial without wearing(p<.05). Average 245 Km/h and 244 Km/h were produced for the swing with and without wearing trails, respectively. EMG results also indicated that the muscle activity of left psoas was significantly increased for wearing trial during downswing and near the impact. Thus, this may affect positively to increase club head speed. The activity of the left latissimus dorsi was dramatically increased during the final stage of swing. This generates elongation effect for longer follow-through and increased impulse between club and ball so eventually valid assistance to increase carry distance. Therefore, the developed assisting wear was proved to be effective tool for increasing golf ball carry distance with maximizing trunk(back) muscle's stretch-shortening effect during backswing and downswing.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.268-276
• /
• 2016

This paper presents a study on the crashworthiness of the scaled-down stiffened panels used on a Korean icebreaker. In order to validate the crashworthiness of the panels, this paper provides various mechanical properties such as the results of a CVN test, quasi-static tensile test, and high-speed tensile test at arctic temperatures. Two types of steels (EH32 and FH32) were chosen for the material tests. CVN tests revealed that the two steels were equivalent up to −60℃ in terms of their impact energy absorption capacity. However, the toughness of FH32 was significantly superior to that of EH32. EH32 showed slightly higher flow stresses at all temperature levels compared to FH32. The improvement ratios of the yield strengths, tensile strengths, plastic hardening exponents, etc. for FH32, which were obtained from quasi-static tensile tests, showed an apparent ascending tendency with a decrease in temperature. Dynamic tensile test results were obtained for the two temperatures levels of 20℃ and −60℃ with two plastic strain rate levels of 1 s⁻¹ and 100 s⁻¹. A closed form empirical formula proposed by Choung et al. (2011;2013) was shown to be effective at predicting the flow stress increase due to a strain rate increase.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.589-597
• /
• 2018

Centrifuge model tests were used to simulate pile-raft composite foundation and pile-geogrid composite foundation with different pile spacing for researching the time effect of negative skin friction of rigid piles in high-speed railways. The research results show that the negative skin friction has a significant impact on the bearing capacity of composite foundation. Pile-raft composite foundation has higher bearing capacity compared to pile-geogrid composite foundation to reduce the effect of negative skin friction on piles. Both the foundation settlement and negative skin friction have significant time effect. The distribution of skin friction can be simplified as a triangle along the pile. The neutral point position moves deeper in the postconstruction stage at larger pile spacing. For pile-geogrid composite foundation, the setting of pile-cap affects the position of neutral point in the post-construction stage. Reinforced cushion with geotextile may promote the better performance of cushion for transmitting the loads to piles and surrounding soils. Arching effect in the cushion of the composite foundation is a progressive process. The compression of the rigid piles contributes less than 20% to 25% of the total settlement while the penetration of the piles and the compression of the bearing stratum below the pile tips contribute more than 70% of the total settlement. Some effective measures to reduce the settlement of soils need to be taken into consideration to improve the bearing capacity of pile foundation.