• The Journal of Art Theory & Practice
• /
• no.4
• /
• pp.77-104
• /
• 2006

The propaganda paintings in oil colors or in forms of posters made from 1949 to 1966 have gone through some changes experiencing the influence of the Soviet Union Art and discussion of nationalization, while putting political messages of the time in the picture planes. The propaganda paintings which have been through this process became an effective means of encouraging the illiterate people in political ideologies, production, and learning. Alike other propaganda paintings in different mediums, the ones which were painted in oil colors and in the form of posters have been produced fundamentally based on Mao Zedong's intensification of the literary art on the talks on literature at Yenan. Yet, the oil paintings and posters were greatly influenced by the socialist realism and propaganda paintings of the Soviet Union, compared to other propaganda paintings in different mediums. Accordingly, they were preponderantly dealt in the discussions of nationalization of the late '50s. To devide in periods, the establishment of People's Republic of China in 1949 as a diverging point, the propaganda paintings made before and after 1949 have differences in subject matters and styles. In the former period, propaganda paintings focused on the political lines of the Communists and enlightenment of the people, but in the latter period, the period of Cultural Revolution, the most important theme was worshiping Mao Zedong. This was caused by reflection of the social atmosphere, and it is shown that the propaganda painters had reacted sensitively to the alteration of politics and the society. On the side of formalities, the oil paintings and posters made before the Cultural Revolution were under a state of unfolding several discussions including nationalization while accepting the Soviet Union styles and contents, and the paintings made afterwards show more of unique characteristics of China. In 1956, the discussion about nationalization which had effected the whole world of art, had strongly influenced the propaganda paintings in oil colors more than anything. There were two major changes in the process of making propaganda paintings in oil colors. One was to portray lives of the Chinese people truthfully, and the other was to absorb the Chinese traditional styles of expression. After this period, the oil painters usually kept these rules in creating their works, and as a result, the subject matters, characters, and backgrounds have been greatly Sinicized. For techniques came the flat colored surface of the new year prints and the traditional Chinese technique of outlining were used for expressing human figures. While the propaganda paintings in oil colors achieved high quality and depth, the posters had a very direct representation of subject matters and the techniques were unskilled compared to the oil paintings. However, after the establishment of People's Republic of China, the posters were used more than any other mediums for propagation of national policy and participation of the political movements, because it was highly effective in delivering the policies and political lines clearly to the Chinese people who were mostly illiterate. The poster painters borrowed techniques and styles from the Soviet Union through books and exhibitions on Soviet Union posters, and this relation of influences constantly appears in the posters made at the time. In this way, like the oil paintings, the posters which have been made with a direct influence of the Soviet Union had developed a new, sinicised process during the course of nationalization. The propaganda paintings in oil colors or in forms of posters, which had undergone the discussion of nationalization, had put roots deep down in the lives of the Chinese people, and this had become another foundation for the amplification of influences of political propaganda paintings in the following period of Cultural Revolution.

• Korean Security Journal
• /
• no.22
• /
• pp.113-144
• /
• 2010

Bioterrorism is becoming more attractive to terrorist groups owing to the dramatic increase in the utility and lethality of biological weapons in line with today's cutting-edge biological science and technology. The Republic of Korea is facing both internal and external terrorist threats, as well as the possible biological warfare by North Korea. Therefore, it is essential to establish an effective bioterrorism response system in the ROK. In order to come up with the adequate response system for the ROK, an in-depth study has been conducted on the current bioterrorism response system of the U.S. whose preparedness is considered relatively adamant. As a result, the following facts have been found: (1)the legislation with regard to bioterrorism has been established or amended according to the current situation in the U.S., (2)the counter terrorism activities have been integrated with the Department of the Homeland Security as the central agency in order to maximize the national CT capacity, (3)Specific procedures and instructions to cope with bioterrorism have been made into manuals so as to enhance the working-level response capabilities. Next, the analysis on the ROK's bioterrorism response system has been performed in various categories, including the legislation system, task role distribution, cooperative relations, and resource application. It turned out that the ROK's legislation basis is relatively weak and it lacks the apparatus to integrate the bioterrorism response activities on the national level. The shortage of the adequate response facilities and resources, as well as the poor management of manpower have also emerged as problems that hinder the effective CT implementations. Through an analytical and comparative study of the U.S. and the ROK systems, this paper presents several ways to ameliorate improve the current system in the ROK as follows: (1)establish the anti-terrorism law, which would be the basic legal basis for the bioterrorism-related matters; and make revisions to the disaster-related legislation, relevant to bioterrorism response activities, (2)establish an integrated body that has a powerful authority to coordinate the relevant CT agencies; and converge the decentralized functions to maximize the overall response capacity, (3)install the laboratories with a high biosafety level and secure enough of the strategic medical stock-pile, (4)enhance the ability of the inexperienced response personnel by providing with a manual that has detailed instructions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.198-206
• /
• 2015

Purpose: We aimed to investigate the effect of combined various microgrooves and thermal oxidation on the titanium (Ti) and to evaluate various in vitro responses of human periodontal ligament cells (PLCs). Materials and methods: Grade II titanium disks were fabricated. Microgrooves were applied on titanium discs to have $0/0{{\mu}m}$, $15/3.5{{\mu}m}$, $30/10{{\mu}m}$, and $60/10{{\mu}m}$ of respective width/depth by photolithography. Thermal oxidation was performed on the microgrooves of Ti substrata for 3 h at $700^{\circ}C$ in air. The experiments were divided into 3 groups: control group (ST), thermal oxidation group (ST/TO), and combined microgrooves and thermal oxidation group (Gr15-TO, Gr30-TO, Gr60-TO). Surface characterization was performed by field-emission scanning microscopy. Cell adhesion, osteoblastic differentiation, and mineralization were analyzed using the bromodeoxyurdine (BrdU), Alkaline phosphatase (ALP) activity, and extracellular calcium deposition assays, respectively. Statistical analysis was performed using the oneway analysis of variance and Pearson's bivariate correlation analysis (SPSS Version 17.0). Results: In general, the combined microgrooves and thermal oxidation group (Gr15-TO, Gr30-TO, Gr60-TO) showed significantly higher levels compared with the control (ST) or thermal oxidation (ST-TO) groups in the BrdU expression, ALP activity, and extracellular calcium deposition. Gr60-TO group induced highest levels of cell adhesion and osteoblastic differentiation. Conclusion: Within the limitation of this study, we conclude that the Ti surface treatment using combined microgrooves and thermal oxidation is highly effective in inducing the cell adhesion andosteoblastic differentiation. The propose surface is also expected to be effective in inducing rapid and strong osseointegration of Ti oral implants.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.15-27
• /
• 1981

In order to investigate on the field performance of 3.5PS power tiller and to obtain the optimum using conditions of it, this experiment has been carried on the plowing operation, the rotary harrowing operation and the ridging operation that compared 3.5PS power tiller(KC-450) with the existing 5PS(DT-40) and 8PS(DT-85) power tiller. It has been performed at Suck Jung-Dong, Ansung Country, from March to October in 1980. The results of this field test were obtained as follows; 1. The plowing performance of KC-450 tiller was found to be 125min/10a that was lower than that of DT-85 tiller by 26min/10a in the effective plowing speed 0.9m/sec. 2. The field efficiency of KC-450 tiller was the highest among the power tillers as to be 82 persent that was higher than that of DT-85 tiller by 5 persent in the effective plowing speed 1m/sec. 3. The rotary harrowing performances of DT-40 tiller and DT-85 tiller were higher than that of KC-450 tiller in the rotary harrowing operation of the same speed, and the field efficiency of KC-450 tiller and DT-40 tiller were higher than that of DT-85 tiller in the rotary harrowing operation. 4. The ridging Performance of testing power tillers were nearly equality in the ridging operation of the same speed, and the field efficiency of testing tillers were higher KC-450 tiller than DT-40 tiller, DT-40 tiller than DT-85 tiller. 5. The work performance of power tiller increased with increase in the size of field area. Work performance and field efficiency of KC-450 tiller were higher than other tillers below 8a in field size 6. DT -85 tiller was more useful in deep plowing depth. But below 8a in field size KC-450 tiller was more easily operated and its field efficiency was higher 7. KC-450 tiller should be more useful to operate in the small size field or in the small scale farming and for the cultivation of vegetables, gardening plants, medicinal herb and tobacco plants, or for the cultivation in vinyl house.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3263-3291
• /
• 1974

Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.

• Journal of Radiation Protection and Research
• /
• v.40 no.2
• /
• pp.118-123
• /
• 2015

The frequency of diagnostic radiation examinations in medical institutions has recently increased to 220 million cases in 2011, and the annual exposure dose per capita was 1.4 mSv, 51% and 35% respectively, compared to those in 2007. The number of chest radiography was found to be 27.59% of them, the highest frequency of normal radiography. In this study, we developed a shielding device to minimize radiation exposure by shielding areas of the body which are unnecessary for image interpretation, during the chest radiography. And in order to verify its usefulness, we also measured the difference in entrance surface dose (ESD) and the absorbed dose, before and after using the device, by using an international standard pediatric (10 years) phantom and a glass dosimeter. In addition, we calculated the effective dose by using a Monte Carlo simulation-based program (PCXMC 2.0.1) and evaluated the reduction ratio indirectly by comparing lifetime attributable risk of cancer incidence (LAR). When using the protective device, the ESD decreased by 86.36% on average, nasal cavity $0.55{\mu}Sv$ (74.06%), thyroid $1.43{\mu}Sv$ (95.15%), oesophagus $6.35{\mu}Sv$ (78.42%) respectively, and the depth dose decreased by 72.30% on average, the cervical spine(upper spine) $1.23{\mu}Sv$ (89.73%), salivary gland $0.5{\mu}Sv$ (92.31%), oesophagus $3.85{\mu}Sv$ (59.39%), thyroid $2.02{\mu}Sv$ (73.53%), thoracic vertebrae(middle spine) $5.68{\mu}Sv$ (54.01%) respectively, so that we could verify the usefulness of the shielding mechanism. In addition, the effective dose decreased by 11.76% from $8.33{\mu}Sv$ to $7.35{\mu}Sv$ before and after wearing the device, and in LAR assessment, we found that thyroid cancer decreased to male 0.14 people (95.12%) and female 0.77 people (95.16%) per one million 10-year old children, and general cancers decreased to male 0.14 people (11.70%) and female 0.25 people (11.70%). Although diagnostic radiation examinations are necessary for healthcare such as the treatment of diseases, based on the ALARA concept, we should strive to optimize medical radiation by using this shielding device actively in the areas of the body unnecessary for the diagnosis.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.4
• /
• pp.347-370
• /
• 2011

Slurry type shield would be very effective for the tunnelling in a sandy ground, when the slurry pressure would be properly adjusted. Low slurry pressure could cause a tunnel face failure or a ground settlement in front of the tunnel face. Thus, the stability of tunnel face could be maintained by applying an excess slurry pressure that is larger than the active earth pressure. However, the slurry pressure should increase properly because an excessively high slurry pressure could cause the slurry flow out or the passive failure of the frontal ground. It is possible to apply the high slurry pressure without passive failure if a horizontal impermeable layer is located in the ground in front of the tunnel face, but its location, size, and effects are not clearly known yet. In this research, two-dimensional model tests were carried out in order to find out the effect of a horizontal impermeable layer for the slurry shield tunnelling in a saturated sandy ground. In tests slurry pressure was increased until the slurry flowed out of the ground surface or the ground fails. Location and dimension of the impermeable layer were varied. As results, the maximum and the excess slurry pressure in sandy ground were linearly proportional to the cover depth. Larger slurry pressure could be applied to increase the stability of the tunnel face when the impermeable layer was located in the ground above the crown in front of the tunnel face. The most effective length of the impermeable grouting layer was 1.0 ~ 1.5D, and the location was 1.0D above the crown level. The safety factor could be suggested as the ratio of the maximum slurry pressure to the active earth pressure at the tunnel face. It could also be suggested that the slurry pressure in the magnitude of 3.5 ~4.0 times larger than the active earth pressure at the initial tunnel face could be applied if the impermeable layer was constructed at the optimal location.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.81-88
• /
• 2011

Effect of concentrations of different plant growth retardants (PGRs) supplied to a recirculated nutrient solution in an ebb and flow system on the growth and development of potted Spathiphyllum 'Top-Pin' and 'Mini' was examined. Plants were planted in 10 cm diameter plastic pots filled with a mixture of peat moss and perlite (1 : 1, v/v) on 30 June 2005 and grown until 23 Sep. 2005. In a closed ebb and flow system, 50, 200, 350, $500mg{\cdot}L^{-1}$ daminozide (B-9), 10, 40, 70, $100mg{\cdot}L^{-1}$ paclobutrazol (Boundy), 5, 15, 25, $35mg{\cdot}L^{-1}$ ethephon (Florel), and 1, 4, 7, $10mg{\cdot}L^{-1}$ uniconazole (Sumagic) were supplemented to a nutrient solution at the initiation of experiment. On every irrigation, the nutrient solution containing PGRs was supplied at a 2 cm depth and kept for 15-20 minutes. The surplus nutrient solution was drained back into the tank for next irrigations. Paclobutrazol gave the most pronounced effect in inhibition of stretchiness. The greatest reduction of leaf length, fresh and dry weights of shoot, and elevated chlorophyll content were recorded in Spathiphyllum, with increasing paclobutrazol concentration. Daminozide concentration greater than $200mg{\cdot}L^{-1}$ resulted in minor stunting. The lowest concentration ($1mg{\cdot}L^{-1}$) of uniconazole showed greater leaf length, leaf width, and leaf petiole length than the control ($0mg{\cdot}L^{-1}$). Uniconazole concentration greater than $1mg{\cdot}L^{-1}$ resulted in similar plant growth as the plant in the control ($0mg{\cdot}L^{-1}$). High concentration ($35mg{\cdot}L^{-1}$) of ethephon resulted in the shortest leaf length, and the greatest chlorophyll content. Inhibition of stretchiness was observed even in the lowest concentration treatments. Among the PGRs, paclobutrazol was most effective in suppressing plant stretchiness. In both cultivars, ethephon and paclobutrazol, but not daminozide and uniconazole, significantly inhibited stretchiness. The results suggested that plant growth retardants (ethephon or paclobutrazol) selected in this study may be used as the most effective agents for inhibition of stretchiness in Spathiphyllum.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.99-122
• /
• 2019

According to the recent IDC (International Data Corporation) report, as from 2025, the total volume of data is estimated to reach ten times higher than that of 2016, corresponding to 163 zettabytes. then the main body of generating information is moving more toward corporations than consumers. So-called "the wave of Big-data" is arriving, and the following aftermath affects entire industries and firms, respectively and collectively. Therefore, effective management of vast amounts of data is more important than ever in terms of the firm. However, there have been no previous studies that measure the effects of big data investment, even though there are number of previous studies that quantitatively the effects of IT investment. Therefore, we quantitatively analyze the Big-data investment effects, which assists firm's investment decision making. This study applied the Event Study Methodology, which is based on the efficient market hypothesis as the theoretical basis, to measure the effect of the big data investment of firms on the response of market investors. In addition, five sub-variables were set to analyze this effect in more depth: the contents are firm size classification, industry classification (finance and ICT), investment completion classification, and vendor existence classification. To measure the impact of Big data investment announcements, Data from 91 announcements from 2010 to 2017 were used as data, and the effect of investment was more empirically observed by observing changes in corporate value immediately after the disclosure. This study collected data on Big Data Investment related to Naver 's' News' category, the largest portal site in Korea. In addition, when selecting the target companies, we extracted the disclosures of listed companies in the KOSPI and KOSDAQ market. During the collection process, the search keywords were searched through the keywords 'Big data construction', 'Big data introduction', 'Big data investment', 'Big data order', and 'Big data development'. The results of the empirically proved analysis are as follows. First, we found that the market value of 91 publicly listed firms, who announced Big-data investment, increased by 0.92%. In particular, we can see that the market value of finance firms, non-ICT firms, small-cap firms are significantly increased. This result can be interpreted as the market investors perceive positively the big data investment of the enterprise, allowing market investors to better understand the company's big data investment. Second, statistical demonstration that the market value of financial firms and non - ICT firms increases after Big data investment announcement is proved statistically. Third, this study measured the effect of big data investment by dividing by company size and classified it into the top 30% and the bottom 30% of company size standard (market capitalization) without measuring the median value. To maximize the difference. The analysis showed that the investment effect of small sample companies was greater, and the difference between the two groups was also clear. Fourth, one of the most significant features of this study is that the Big Data Investment announcements are classified and structured according to vendor status. We have shown that the investment effect of a group with vendor involvement (with or without a vendor) is very large, indicating that market investors are very positive about the involvement of big data specialist vendors. Lastly but not least, it is also interesting that market investors are evaluating investment more positively at the time of the Big data Investment announcement, which is scheduled to be built rather than completed. Applying this to the industry, it would be effective for a company to make a disclosure when it decided to invest in big data in terms of increasing the market value. Our study has an academic implication, as prior research looked for the impact of Big-data investment has been nonexistent. This study also has a practical implication in that it can be a practical reference material for business decision makers considering big data investment.