• 한국관개배수논문집
• /
• 제17권2호
• /
• pp.95-104
• /
• 2010

Water quality data for 10 years (2000~2009) from about 826 reservoirs that are operated as a agricultural water quality survey network were analyzed in order to seek water quality management plan based on physical and chemical characteristics of agricultural reservoirs. The 95% reservoirs that exceed agricultural water quality standard of Chl-a (35mg/ $m^3$) had effective water depth shallower than 5m. The reason was that the reservoirs had more inflows of nutrient salts from the watershed, bigger surface water area of weak structure to algae occurrence. As the reservoirs of effective water depth shallower than 5m cover 49% of benefited area for irrigation, it is critical for agricultural water quality management of the reservoirs. The water quality of reservoir with shallower than 5m effective water depth was worse than reservoir with deeper than 5m effective water depth. Therefore, it is desirable that effective water depth of reservoirs make more than 5m for water quality management by building the bank higher and dredging the bottom of reservoirs.

• 한국습지학회지
• /
• 제25권2호
• /
• pp.121-131
• /
• 2023

본 연구에서는 토심 대신 유효토심을 사용함에 따라 발생하는 강우-유출 해석과정의 문제를 VIC(Variable Infiltration Capacity) 모형을 가지고 살펴보았다. 이러한 연구목적을 달성하기 위해 모형의 매개변수를 다음과 같이 결정하였다. 먼저, 가용한 수치 정보를 이용하여 결정할 수 있는 매개변수는 고정하였다. 직접유출 및 기저유출 등에 관여하는 매개변수는 VIC 모형의 추천값을 적용하였다. 토심의 경우 (1) 유효토심을 적용하는 경우, (2) 토양층 연직 구조 특성을 반영하여 유효토심의 1.5배를 적용하는 경우 및 (3) 유효토심의 1.25배를 가정한 토심을 적용하는 경우, (4) 유효토심의 2.0배를 가정한 토심을 적용하는 경우 총 4가지를 고려하였다. 본 연구는 한강 유역의 충주댐 유역 및 소양강댐 유역을 대상으로 1983년에서 2020년까지의 기간에 대해 모의를 수행하였다. 연구 결과, 토심 대신 유효 토심을 적용하는 경우 직접유출과 기저유출에는 정반대의 영향을 미치며, 직접유출에는 3% 이상의 증가, 기저유출에는 동일 규모의 감소가 발생하는 것을 확인하였다. 추가로 충주댐과 소양강댐 유역의 유효토심 추정에 있어 가장 큰 영향을 미치는 것은 암석노출지의 비중으로 나타났으며, 그 영향으로 두 유역의 직접유출률과 기저유출률의 차이가 크게 다른 것으로 확인할 수 있었다.

• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.463-473
• /
• 2008

In this study, we measure damage depth and calculate effective impact speed in case of rear-end collision using real car insurance data. We study the relationship between demage depth and effective impact speed, and present statistical model for these two variables. In our real data study, 3-degree polynomial equation model is better fit to effective impact speed and demage depth than the simple linear model that are estimated in previous other studies. Damage depth is a major factor to see the extent of impact in a car collision, and by using this equation, it is possible to evaluate the severity of driver's injury.

• 한국토양비료학회지
• /
• 제50권1호
• /
• pp.21-30
• /
• 2017

The study was performed to determine effective soil depth with crop type. Lysimeters, filled with three types of soils (sandy loam, loam and clay loam), were used. Effective soil depths for 25 cm, 50 cm, 75 cm, and 100 cm were considered for each soil. Six crops were investigated for plant height and yield, and rooting depths: Chinese cabbage, maize, lettuce, potato, red pepper, and soybean. Experiment was conducted at the National Institute of Agricultural Sciences in Suwon from 2012 to 2014. Effective rooting depth including 70% of root ranged from 19 cm to 29 cm for Chinese cabbage, from 24 cm to 38 cm for maize, from 17 cm to 24 cm for lettuce, from 27 cm to 32 cm for soybean, and around 50 cm and 30 cm for potato and red pepper. The maximum depth was 60 cm for soybean, 50 cm for Chinese cabbage, lettuce, and potato, and 75 cm for maize and red pepper. Each crop showed high yield in the treatment with soil depth over maximum rooting depth under all soils.

• 대한임베디드공학회논문지
• /
• 제17권4호
• /
• pp.209-215
• /
• 2022

This paper proposes a novel approach for training an unsupervised depth estimation algorithm. The objective of unsupervised depth estimation is to estimate pixel-wise distances from camera without external supervision. While most previous works focus on model architectures, loss functions, and masking methods for considering dynamic objects, this paper focuses on the training framework to effectively use depth cue. The main loss function of unsupervised depth estimation algorithms is known as the photometric error. In this paper, we claim that direct depth cue is more effective than the photometric error. To obtain the direct depth cue, we adopt the technique of knowledge distillation which is a teacher-student learning framework. We train a teacher network based on a previous unsupervised method, and its depth predictions are utilized as pseudo labels. The pseudo labels are employed to train a student network. In experiments, our proposed algorithm shows a comparable performance with the state-of-the-art algorithm, and we demonstrate that our teacher-student framework is effective in the problem of unsupervised depth estimation.

• Tribology and Lubricants
• /
• 제32권1호
• /
• pp.18-23
• /
• 2016

The effective case depth for case-hardened rolling bearing has been discussed. For this purpose, rolling contact fatigue tests for ball bearings built with inner race of various hardness values were conducted until L₁₀ calculating rating life using a bearing life test machine under radial loading. Then, the distribution of residual stress below the inner raceway, which depended on the hardness value, was measured by X-ray diffraction. As a result, the linear relationship was established between the hardness value of the inner race and the theoretical shear stress evaluated at the depth where the residual stress disappeared below the inner raceway. Based on the relationship, it could be found that the factor of safety in bearing manufacturer’s rules for the effective case depth of case hardened rolling bearings was set higher. However, it could be also found that the hardness values at the depth where the maximum shearing stress acted below the raceway surface in a tapered roller bearing hardened by the carburizing process, were not sufficient for preventing plastic deformation under the basic dynamic load rating. Consequently, further efforts were still required to reduce or to disperse the contact load on the material design of a rolling bearing in order to prolong its life.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.165-168
• /
• 2003

The objective of this paper is to investigate the effective width of wide beam. Three specimens were designed to have different depths of wide beam and to simulate exterior beam-column joint including spandrel beam. Load reversals were applied to the end of wide beam to model behaviors under seismic situation. From the test, it was shown that the strength and effective width of specimens were improved when the depth of specimens increased. The effective width of wide beam depended on the depth of it. Formulas in ACI 318-02 underestimated the effective width of wide beam even though these reflected the contribution of the depth of beam.

• Architectural research
• /
• 제20권3호
• /
• pp.75-82
• /
• 2018

The aim of the study is to evaluate the concrete shear strength and structural behavior of two general beams and eight shape memory alloys (SMAs)-reinforced beams under the flexural test. This work compares the existing reference formula for concrete shear strength with test result to provide the basic data for the design of highly intelligent reinforced concrete (hereinafter, HIRC) beams. The evaluation of the concrete shear strength was performed with effective depth (d=65, 70, 80), SMA diameter change (ø=2.0, 2.5) as the main variables of the specimens. For the relationship between the effective depth and the $V_{\exp}/V_{cal}$, the test result shows that the concrete shear strength gradually approaches 1.0 as the effective depth length increase. For the AIJ formula, the specimens are approached evenly for comparison between $V_{\exp}/V_{cal}$ and the by-product (garnet, fly-ash) reinforced specimen; however, other formulas indicate a deviation.

• Structural Engineering and Mechanics
• /
• 제18권2호
• /
• pp.263-276
• /
• 2004

The purpose of this paper is to determine the subsoil depth affected from the load on the plate resting on elastic foundation using stress distribution within the subsoil that will be occurred depending on the loading and dimension of the plate. An iterative method is developed in order to determine the effective depth of the subsoil under the plate. Numerical examples from the technical literature are solved by means of the method suggested herein and displacements, bending moments and shear forces are presented in graphical and tabular forms to evaluate the effects of the limit depth considered in the study. Results showed the efficiency and simplicity of the present approach for the plate resting on an elastic foundation.

• 한국농공학회지
• /
• 제44권2호
• /
• pp.67-74
• /
• 2002

The purpose of this study was to investigate the effects of ponding depth treatment on water balance in paddy fields. Three ponding depth treatments, very shallow, shallow, and deep were used. The experimental plots were three 80m $\times$ 8m rectangular plots. Daily values of rainfall amount, ponding depth, irrigation water, drainage water, evapotranspiration, and infiltration were measured in the field. The ponding depth was continuously observed by water level logger during the growing season. The ET was measured by 1-m diameter PVC lysimeters. Irrigation water volume was measured by 75 mm pipe flowmeters and the drainage water volume by 75 mm pipe flowmeters and a recording Parshall flume. The results showed that irrigation water depths were 688.9 mm, 513.6 mm, and 624.4 mm in very shallow, shallow, and deep ponding, respectively. The effective rainfall amounts (effective ratio) were 243.7 mm(48.8%), 344.6 mm(68.9%), and 272.9 mm(54.6%) in very shallow, shallow, and deep ponding, respectively. The three treatments did not show any statistical difference in growth and yields. But the shallow depth treatment showed the largest yield.