• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.16-22
• /
• 1986

Effective air-drying days for four seasons and districts were calculated from average monthly temperature, relative humidity and wind speed records for 24 districts in Korea and air-drying calendars were prepared. And these districts were divided into zones of effective air-drying days. These results were as follows. 1. Effective air-drying days for four seasons were 20 to 23 days in springtime, 30 days in summertime, 21 to 26 days in autumntime, and 8 to 17 days in wintertime. 2. Effective air-drying days variated from district to district and was 237 days, the shortest period, in Ch'unch$\breve{o}$n, and was 288 days, the longest period, in-S$\breve{o}$gwipo. 3. Effective air-drying days were primarilly related to the difference in temperature from month to month, and secondarily, especially in September, were related to the differences in relative humidity, and were not related to wind speed. 4. South Korea was divided into 4 zones of effective air-drying days and these zones had it little difference compared with meteorological zones.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.27-33
• /
• 1985

Air-drying tests were carried out on green taun (Pometia pinnata f glabra) for 25-mm and 50-mm thickness to elucidate drying characteristics on air-drying rate, time and defects in spring and air-drying calendar. The results of this study were as follows: 1. The air-dried lumber for 25-mm thickness from an initial average moisture content (MC) of $58.3{\pm}3.5$ percent reached 30 percent MC in 17 days, 25 percent MC in 24 days, 20 percent MC in 38 days and 15 percent MC in 84 days. 2. The air-dried lumber for 50-mm thickness from an initial average MC of $59.6{\pm}5.0$ percent reached 30 percent MC in 39 days, 25 percent MC in 55 days and 20 percent MC in 84 days. 3. Air-drying calendar that could be useful in estimating drying times for each month developed by the use of climatological data for Suwon. Total number of effective air-drying days during a year were 243.5 days and the major determinant of the effect air-drying days was temperature. 4. The air-drying rates for 25-mm and 50-mm coated lumber were slight1y slower than those of uncoated lumber. The number and total length of both end checks and surface checks for end coated lumber were less severe than those of uncoated lumber.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.721-731
• /
• 2019

Air drying depends on species, density, dimension of wood, the geographical location of the air drying yard, and the meteorological factors of air drying site. If there are four seasons with large difference in temperature and humidity like in Korea, the research of the meteorological factors is required in air drying site. In this study, effective air drying days (EADD) of 24 regions in Korea were calculated by using the average monthly temperature, relative humidity, and wind speed. The EADD in 24 regions in Korea was ranged from 239 days to 291 days, with an average 265 days. This result is 5 days increased compared to the average of EADD calculated using the meteorological factors from 1955 to 1984. The results of multiple regression analysis on the EADD and meteorological factors showed that EADD affected in the order of temperature, relative humidity, and wind speed. As a result of dividing Korea into 4 zones of EADD, the zones of EADD were moved northward compared to previous study due to global warming. As basic data for predicting the moisture content (MC) distribution of Korean red pine logs during air drying conducted in Seoul, the average monthly temperature, relative humidity and wind speed for three years from 2016 to 2018 were presented, and the corresponding changes of the equilibrium MC were analyzed.

• Korean Journal of Weed Science
• /
• v.32 no.3
• /
• pp.180-187
• /
• 2012

Panicum maximum, Panicum repens, Imperata cylindrica, Pennisetum polystachion and Cyperus rotundus are five rhizomatous grass weeds that exist and are problematic in the coconut lands of Sri Lanka. Rhizomatous weeds are the most difficult to control because of their vegetative reproduction by underground propagules. Therefore chemical and biological techniques have failed to control these weeds to acceptable levels. Experiments were conducted to investigate the impact of depth of burial, duration of sun drying or duration of air drying rhizomes of the selected weed species on germination. Depth of burial reduced germination of all species. Burying rhizomes at depths less than 10 cm inhibited germination of P. maximum and P. polystachion. Burying depths below 30~40 cm inhibited germination of all species. Sun drying or air drying rhizomes for durations less than 5 days inhibited germination of P. maximum and P. polystachion. Germinations of all species were inhibited by sun drying rhizomes for 15 days or air drying rhizomes for 20 days. Sun drying of rhizomes of all species for five days reduced the moisture content to a greater extent than air drying. The results indicated that burying rhizomes at the depthsbelow 30~40 cm, sun drying rhizomes for durations beyond 15 days or air drying rhizomes for durations beyond 20 days would be effective in controlling germination of these species. The investigations of the experiments also suggest that keeping rhizomes on the soil surface without burying, sun drying rhizomes or air drying rhizomes for durations of 5~15 days would produce weak plants.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.405-412
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) to 16.7%(w.b) moisture contents using the prototype dryer. The average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to the conventional natural air dryer where is grains were not circulated during drying periods. The dryer performance evaluation index was 738.3KJ/(kg.water), which was more effective than that of grain circulation t)pe hot air dryer(3,500-5,000 KJ/kg.water).

• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.227-232
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) of moisture contents to 16.7%(w.b), by prototype dryer and the average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to a conventional natural air dryer in which grains were not mixed during drying periods. The dryer performance evaluation index was 738.3kJ/(kg.water), which was more effective than that of grain circulation type hot air dryer(3,500∼5,000 kJ/kg.water)

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Korean Biological Nursing Science
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2011

Purpose: The purpose of this study was to analyze effects of hand drying methods after hand-washing. Hand drying methods consisted of spontaneous evaporation, paper towel, hand dryer with rubbing, and hand dryer without rubbing. Methods: The research design was a crossover design. The subjects were eighteen university students and randomly assigned in four group. Each group had the schedule of treatment. The schedule tested one drying method per a day and proceeded for 4 days. The data collection was performed from July 27 to July 30, 2010. Data were analyzed by Kruskal-Wallis, Mann-Whitney and Wilcoxon test. Results: There was significant difference between the after CFU between natural dry, paper towel, air dryer with hand rubbing, and air dryer without hand rubbing(p=.006). The after CFUs of paper towel, natural dry and air dryer without hand rubbing groups were statistically less than air dryer with hand rubbing group. Conclusion: It was shown that the paper towel, spontaneous evaporation and without rubbing hand dryer are effective hand drying interventions on reducing CFU on hand. However additional researches with large sample and strict methodology are needed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3263-3291
• /
• 1974

Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.