• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.451-456
• /
• 1995

To elucidate the intrinsic rheological properties of carboxymethyl chitin (CM-chitin) from the shell of red snow cyab (Chinonecetes japonicus), the configuration and polyelectrolyte behavior of CM-chitin in low concentration solution were investigated. Unperturbed dimensions were ranged from $127{\AA}\;to\;113{\AA}$ as root mean square end-to-end distance$(r_0)$, $52{\AA}$ to $46{\AA}$ as radius of gyration$(S_0)$. The intramolecular expansion tarter(a) was not varied with molecular weight and was 2.1. And effective bond length $(b_0)$ was $14.5{\AA}$. In perturbed condition, Flory constant was $2.35\times10^{21}$. When ionic strength were 0.02 and 1.0, intrinsic viscosity were 1.95dl/g and 1,06 dl/g, respectively. These results suggested that CM-chitin is a polyelectrolyte in aqueous media. At infinite ionic strength, intrinsic viscosity was 0.91dl/g. The intrinsic stiffness of CM-chitin backbone was estimated by evaluating the stiffness parameter (B) as 0.11 and agreed well with the results of k-carrageenan.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.320-326
• /
• 2001

To obtain the basic data for preparing edible or biodegradable film, fish meal protein isolates (FMPI) were prepared through alkaline extraction. And FMPI's properties and the ester compounds permeability of FMPI film were measured. FMPI were extracted under various extracting time with 0.2 N NaOH solution at $60^{\circ}C$, Recovery ratios of FMPI extracted from fish meal were increased with extracting time increasing. Surface hydrophobicity of FMPI extracted for 1 hr showed highest value. Emulsifying activity index (EAI) was increased with the increasement of extracting time but its emulsifying stability index (ESI) showed an inverse results. Viscosity of FMPI solution showed the highest value at pH 2 but showed the lowest value at pH 4, The higher concentration of sorbitol as plasticizer showed the higher ethyl acetate permeability of FMPI film, Ethyl acetate permeability of FMPI films according to kind of plasticizers showed different degree and increased in order as follow: polyethylene glycol, glycerol and sorbitol. Ester compounds having the lower molecular weight showed the higher permeability. Increment of temperature increased the ethyl acetate permeability of FMPI film. FMPI haying higher surface hydrophobicity made FMPI film be higher tensile strength. On elongation of FMPI films, kinds of plasticizer were more effective than surface hydrophobicity of FMPI.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.745-752
• /
• 2012

Diesel engines are most suitable for biodiesel fuel because diesel fuel has a higher cetane number compared to gasoline and diesel engines have no spark ignition system; hence, engine conversion is easy and cost effective. For these reasons, in this study, the spray behavior characteristics of vegetable palm oil were analyzed by using a common-rail injection system of a commercial diesel engine, and the results were compared with those obtained for the diesel fuel. The injection pressures and blend ratios of palm oil and diesel fuel (BD3, BD5, BD20, BD30, BD50, and BD100) were the main parameters. The experiments were conducted for different injection pressures-500 bar, 1000 bar, 1500 bar, and 1600 bar-by setting the injection duration at $500{\mu}s$. We determined there is no significant difference in the macro characteristics of the spray behavior (spray penetration and spray angle) in response to any change in the blend ratio of palm oil and diesel fuel at a fixed injection pressure. In particular, all experiments showed a spray angle of approximately $15^{\circ}$.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.85-89
• /
• 2006

The effect of vapor grown carbon fiber (VGCF) contents on electrical and rheological properties of VGCF filled polyphenylene sulfide (PPS) composites prepared through melt mixing using a twin screw exruder was studied. This method was proved to be quite effective to produce good dispersion of VGCF in the matrix even for highly filled PPS. From the dependence of the electrical conductivity on VGCF content, the percolation phenomena began to occur above $10\;wt\%$. While there is only a marginal increase of viscosity for 1 and $5\;wt\%$ VGCF filled PPS, the composites containing $10\;wt\%$. While VGCF showed abrupt increase in viscosity as well as flattening of frequency vs modulus curve, indicating a transition from a liquid-like to a solid-like behavior due to the creation of VGCF network. This result agrees well to the fact that the network formation in the composite can be composite by rheological property dependence on filler content as well as by electrical conductivity measurement.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.570-576
• /
• 2014

Palmitoyl tripeptide (M330) showed higher antimicrobial activities than methyl paraben or phenoxy ethanol through minimum inhibitory concentration (MIC) test. However, when the M330 was added into cosmetic formulation, white precipitates formed due to the electrostatic interaction between M330 and carbopol (carboxy vinyl polymer) as a thickener in cosmetics, and the viscosity of cosmetics decreased sharply. Also, the antimicrobial activities of M330 in cosmetics became lower than those of methyl paraben or phenoxy ethanol. Thus, the encapsulation of M330 in ethosome vesicle was attempted in order to recover the declined antimicrobial activities of M330 in cosmetics and prevent the precipitates from forming. When ethosome-encapsulated M330 was added into cosmetics, the precipitates did not form, and the decrease in the viscosity of cosmetics was not large compared to the addition of unencapsulated M330. Challenge tests showed that antimicrobial activities against gram negative bacteria were improved by the encapsulation of M330, but the encapsulation was not effective against gram positive bacteria and fungus. A combination of M330 with EDTA showed synergistic inhibitory potential against C. albicans. After coencapsulation of M330 and EDTA in ethosome, antimicrobial activities proved to be higher than those of unencapsulated M330 and EDTA.

• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.115-130
• /
• 1999

Preservative effects of natural preservatives, citric acid and salt on chopped garlic were investigated. Citric acid was very effective for the repression of bacteria multiplying and browning of chopped garlic in 0.5%~1% concentration. Salt had an effect on the repression of bacteria multiplying and browning color of chopped garlic except for 1% NaCl. Synergy effect between citric acid and NaCl was also very good for the decreasing of bacteria multiplying and the maintaining of Hunter color of chopped garlic. Compounded effect among the GF, CA and ascorbic acid was somewhat proper in the sensory evaluation of chopped garlic. And the sensory evaluation score was best in chopping size 3mm(diameter) of chopped garlic and viscosity 4500cp. of chopped garlic.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.533-538
• /
• 2012

The retrogradation properties of a Korean rice cake ($Karedduk$) added with oligosaccharides after 0~30 hr of storage at $5^{\circ}C$ were examined by texture profile analysis and the Avrami equation using textural characteristics. Oligosaccharides, such as galactooligosaccharide (50%) and maltooligosaccharide, were added to dry rice flour at levels of 10%. In the amylogram, the breakdown (P-H) and consistency (C-H) of the Korean rice cake (Karedduk) added with oligosaccharides were lower than those of the control. Texture profile analysis using a Texture Analyzer revealed that the hardness of the Korean rice cake ($Karedduk$) added with oligosaccharides was lower than the control. The Avrami exponent ($n$) for the control, galactooligosaccharide (50%) 10% and maltooligosaccharide 10% addition was 2.415, 2.771 and 2.683, respectively. The time constant (1/$k$) for galactooligosaccharide (50%) 10% or maltooligosaccharide 10% addition was higher than the control. Overall, adding galactooligosaccharide (50%) 10% or maltooligosaccharide 10% to a Korean rice cake ($Karedduk$) is effective in retarding retrogradation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.2
• /
• pp.204-211
• /
• 2023

This study investigated the physicochemical properties and palatability-enhancing effects of the alcohol precipitate, in the enzymatic extracts of Sargassum confusum C. Agardh (SC), obsained using the crude enzyme of Shewanella oneidensis PKA 1008. We analyzed the oligosaccharides recovered from the alcohol precipitate using a thin-layer chromatography for SC-degrading extracts, pH, color, reducing sugar, and viscosity. Thin-layer chromatography showed that after treating with the crude enzyme for 60 h, the polysaccharides were degraded into tetramers, dimers, and trimers and pH increased in the alcohol precipitate (EtOH Sedi). In terms of color, the redness and yellowness of alcohol precipitate/supernatant (EtOH Sedi+Super) and the brightness of EtOH Sedi were the highest among enzyme treated for 0 h and 60 h, EtOH Sedi, and EtOH Sedi+Super. In the reducing sugar analysis, EtOH Sedi showed the lowest value of 13.63 ㎍/mL, and the lowest viscosity of 1.13. In terms of the sensory evaluation, EtOH Sedi+Super showed the highest value with respect to the overall preference. These results suggest that the crude enzyme of S. oneidensis PKA 1008 is effective at degrading polysaccharides, and its recovery increases the palatability of the alcohol precipitate.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.149-156
• /
• 2020

Permeation grouting effectively enhances soil strength and decreases permeability of soil; however, the flow of grout is heavily affected by anisotropy of hydraulic conductivity in layers. Therefore, this study investigates the effect of permeability anisotropy on the effective radius of horizontal permeation grout using computational fluid dynamics (CFD). We modeled the horizontal permeation grout flow as a two-phase viscous fluid flow in porous media, and the model incorporated the chemical diffusion and the viscosity variation due to hardening. The numerical simulation reveals that the permeability anisotropy shapes the grout bulb to be elliptic and the dissolution-driven diffusion causes a gradual change in grout pore saturation at the edge of the grout bulb. For the grout pore saturations of 10%, 50% and 90%, the horizontal and vertical radii of grout bulb are estimated when the horizontal-to-vertical permeability ratio varies from 0.01 to 100, and the predictive model equations are suggested. This result contributes to more efficient design of injection strategy in formation layers with permeability anisotropy.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.44-50
• /
• 1994

In order to develop an effective extraction method of sea mustard, five different methods of boiling in 0.5% $Na_{2}EDTA(A)$, in 0.1 N HCI(B), in 0.5% $Na_{2}EDTA$ and 0.1 N HCI(C) and hydrolysis with two different polysaccharides-hydrolyzing enzymes of Celluclast(method D) and Ultrazyme(method E) prior to boiling in 0.5% $Na_{2}EDTA$ and 0.1 N HCI were studied. The highest yields of solids(63.14%) and protein(26.39%) from the extract were obtained by method D. The concentration of amino-N was significantly improved by method C(870 ppm) followed by method D(770 ppm), B(570 ppm) and A(480 ppm) compared to the control(270 ppm). Total free amino acids, mainly alanine, glutamic, and aspartic acids, were greatly increased by methods of A(8.88 mg%), D(4.14 mg%) and E(4.18 mg%) which were $2.5{\sim}5.1$ times higher than those in control(1.71 mg%). The sensory characteristics showed that extract D was significantly low in intensity of fishy odor and high in seaweed taste. Therefore, method D was suggested as the effective extraction method.