• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.43-48
• /
• 2012

Generally accelerated life test is well known as one method to reduce reliability qualification test period. This test is conducted under the higher stress condition than normal condition. So it can save the test time by calculating the acceleration factor from the relationship between the worst stress condition and normal condition. This paper investigates the worst stress condition for the accelerated life test to increase the acceleration factor. Especially, we focused on the method to obtain effective acceleration factors under the worst stress condition. Moreover, we considered how to decide the worst stress condition by looking for the operating limit of this system. The acceleration factor can be estimated from the ratio of the kinematic viscosity in the normal condition and the worst stress condition, the lowest temperature, by using Arrhenius relationship. Through some experiments for a refrigerator's compressor, we were able to confirm how to increase acceleration factors and how to reduce the reliability qualification test period with minimum samples.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.25-30
• /
• 1991

Chicken liver was enzymatically hydrolyzed with an alkaline protease and determined the optimal conditions of reaction temperature and time, pH and enzyme to substrate ratio(E/S ratio) for possible utilization as a protein supplementary ingredient. The functional properties of hydolysate measured were water and oil absorption capacity, emulsifying activity and viscosity and sensory properties were also evaluated. It was found that hydrolysis at $60^{\circ}C$ and pH 8.0 were most effective and the degree of hydrolysis increased with increasing E/S ratio. A decrease in water and oil absorption capacity and an increase in viscosity were found during hydrolysis. The lowest emulsifying activity and highest water absorption were measured for 1/2 hour-hydrolysate and little difference was found for those treated more than 1 hour. The sensory characteristics of odor showed no significant difference among the chicken liver hydrolysates while the brightness increased and red decreased significantly(p<0.01) as the hydrolysis proceeded.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.164-170
• /
• 2002

Measurements of sedimentation, solid loading, zeta potential, and viscosity were employed to determine a proper dispersant and its amount for a well dispersed alumina powders in aqueous alumina tape casting using acrylate as a binder. Polycarboxylic acid was the most effective one among various dispersants considered in the present study and its amount was 0.23∼0.24 g per 100 g alumina for a dispersion. Better dispersion was obtained as an increase of dispersant addition. However, the dispersion was hindered as the amount of dispersant was higher than the optimum amount because of bridging or tangling of polymer chains. Excellent aqueous alumina tapes were prepared from the slurry containing the optimum amount of the polycarboxylic acid (0.2g), alumina powders(100 g), acrylate and Benzoflex as binder and plasticizer, respectively. The viscosity of the slurry was 570 cps and the alumina loading in the tape was 57 vol%.

• Food Science of Animal Resources
• /
• v.34 no.4
• /
• pp.500-506
• /
• 2014

This study investigated the effects of NaCl replacers (KCl, $CaSO_4$, and $MgSO_4$) on the quality and sensorial properties of pork patty. In the characteristics of spray-dried salt particles, KCl showed the largest particle size with low viscosity in solution. Meanwhile $CaSO_4$ treatment resulted in the smallest particle size and the highest viscosity (p<0.05). In comparison of the qualities of pork patties manufactured by varying level of Na replacers, $MgSO_4$ treatment exhibited low cooking loss comparing to control (p<0.05). Textural properties of KCl and $MgSO_4$ treatments showed similar pattern, i.e., low level of the replacers caused harder and less adhesive texture than those of control (p<0.05), whereas the hardness of these products was not different with control when the replacers were added more than 1.0%. The addition of $CaSO_4$ also manifested harder and less adhesive than control (p<0.05), but the textural properties of $CaSO_4$ treatment was not affected by level of Ca-salt. Eventually, sensorial properties indicated that KCl and $CaSO_4$ influenced negative effects on pork patties. In contrast, $MgSO_4$ showed better sensorial properties in juiciness intensity, tenderness intensity as well as overall acceptability than control, reflecting that $MgSO_4$ was an effective Na-replacer in meat product formulation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.229-234
• /
• 2003

As electrorheological fluid(ER fluid) has a characteristic that apparent viscosity varies when electric field applied, so rheological characteristic(yield stress & viscosity) changes in proportion to the electric field applied and the response time is very short within a few miliseconds . In case of using ER fluid for journal bearing as lubricant, it is estimated that it's possible to realize very effective journal bearing system that is not complicate and has a very quick response time. It is necessary to examine the influence of rheological characteristic that varies with electric field applied on bearing characteristic to apply ER fluid to journal bearing, however there are few studies for about that. As for the journal bearing, it comes under high shear flow mode that has shear rate range of $10^3\~10^4s^{-1}$ because rotational speed is very high and clearance is small. But most of the studies for about ER fluid issued until now is about the range of $10\~10^2s^{-1}$. So, there are a lot of difficulties to understand the characteristic offish shear flow mode and furthermore it is restricted to make an experiment for about the characteristic of ER fluid because of the limitation of experimental equipment. The equipment was prepared to make an experiment lot high shear flow mode that has the range of $10^3\~10^4s^{-1}$ using ER fluid that is composed of silicon oil with dispersed particle of starch. Using the above system, the fluid characteristic of ER fluid was studied.

• YAKHAK HOEJI
• /
• v.42 no.2
• /
• pp.187-195
• /
• 1998

In order to ameliorate disadvantages of buccal ointments and mucoadhesive tablets used for the treatment of aphthosis, a thin mucoadhesive patch containing triamcinolone acetoni de was designed and evaluated for the pharmaceutical properties. The adhesive gel layer consisting of Noveon AA-1, hydroxypropylcellulose-M and ethylcellulose N 100, and the protective gel layer of ethylcellulose N 100, Eudragit RSPO and castor oil have been formulated and various properties such as viscosity of drug gel layer, thickness, in vitro adhesion time, adhesive strength, surface pH, content uniformity and drug release are tested. The mean viscosity of drug-containing gel layer was found to increase with increasing amount of Noveon OAA-1 or hydroxypropylcellulose-M. The optimum formulation showed the thickness of 171 ${\mu}$m, surface pH of 4.6, in vitro adhesion time of 8 hours and adhesive strength of 272.7g/sheet. The drug content of each patch was relatively homogeneous with the value of 273${\pm}$6.77g. Drug release study showed that compared to mucoadhesive tablet, the patch showed a faster drug release. Drug release was delayed by hydroxypropylcellulose-M, but not by ethylcellulose N 100. The patches prepared were nonirritant and the muco adhesion was better than the commercial product (AftachR) on the market. Based on these results, this mucoadhesive patch is expected to be an effective dosage form for the treatment of aphthosis.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.384-390
• /
• 2008

This study examined the effects of sprouted brown rice (SR), gluten (G), and hydroxypropyl-methyl-cellulose (H) on the suppression of retrogradation in breads made with Korean wheat flour. An amylograph was used to determined the pasting properties of dough samples made with Korean wheat flour and additions of SR, SR+G, SR+H, and SR+G+H, respectively. In addition, a texture analyzer was employed to measure the hardness changes of bread samples left at room temperature for 72 hours. Finally, the type of retrogradation was calculated by the Avrami equation. The results showed that the addition of SR significantly decreased dough viscosity. However, the dough samples containing SR, G, and H all displayed reduced cold paste viscosity and setback, indicating a suppression of staling. The bread samples containing SR added to Korean wheat flour had increased hardness, but the addition of gluten (SR+G) reduced hardness. Upon examining the bread samples stored at room temperature for 24 hours, it was shown that the addition of G and H with SR (SR+G+H) suppressed retrogradation. Finally, the Avrami model data indicated that the type of retrogradation varied according to the addition of SR, G, and H. The breads made with hard wheat flour (HWF), WM, and WM+SR+H had similar Avrami exponents ($1.20{\sim}1.28$), while those for WM+SR, WM+SR+G, and WM+SR+G+H ranged from 2.7 to 3.3. Overall, the combined addition of SR and H was considered effective for preventing retrogradation in bread made with Korean wheat flour.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.743-752
• /
• 1993

To elucidate the effects of natural gums, i.e. carrageenan, locust bean gum and xanthan gum and synthetic gums, i.e. carboxymethyl cellulose(CMC) and methyl cellulose(MC) on the foaming properties of sodium caseinate, surface tension, absolute viscosity, turbidity, foaming ability, foam stability, and heat stability of the foams of the caseinate solutions with added gums were examined. The surface tension of sodium caseinate solution(5%) adding to gums at pH 4.0 and 5.0 were higher than those at pH 7.0 and 8.0. The viscosities of the solutions adding to gums(0.1, 0.2, 0.3 and 0.5%) ap pH 4.0, 5.0, 7.0 and 8.0 were 2.4~170.0, 2.5~190.0, 5.3~180.0 and 6.3~99.0 cps, respectively. Especially xanthan gums predominantly increased the viscosity. Turbidities were 97.3~98.2 at pH 4.0 and 5.0 and 93.0~95.8 at pH 7.0 and 8.0. Foaming abilities of the solution adding to xanthan gum, carrageenan and locust bean gum were increased, while those of CMC and MC were decreased. Additions of xantham gum, CMC and MC increased the foam stability, especially xanthan gum did predominantly. Xanthan gum, MC and locust bean gum were more effective than CMC and carrageenan for heat stability. For improving the foaming properties of sodium caseinate xanthan gum were best of five kinds of gums. Surface tensions and turbidities of the solution were related to foaming ability, and the viscosities were related to foam stability and heat stability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.75-83
• /
• 2001

The potential of oxygen delignification is a powerful tool to reduce detrimental environmental effects. This study was performed to investigate the effect of steam explosion treatment of chemically treated oak wood on oxygen-alkali pulping. Pulp yield during steam explosion treatment by ${Na_2}{O_3}$-NaOH impregnation was higher than the other impregnation chemicals. Also, NaOH extraction at room temperature after steam explosion treatment improved the kappa number from 140~116 to 90~64. Oxygen-alkali pulping of chemical steam explosion treated woods affected to pulp yields. ${Na_2}{O_3}$-NaOH impregnation was very effective to higher carbohydrate yields at same delignification level. Its carbohydrate yield seemed to be highly related to the effluent pH. Oxygen-alkali pulping after steam explosion treatment of ${Na_2}{O_3}$-NaOH impregnated wood was shown that carbohydrate yield was very high because its effluent pH was increase from natural to mild alkali. Even if oxygen bleaching limit the delignification to 50% in order to avoid unacceptable yield and viscosity losses, oxygen-alkali pulping after steam explosion by ${Na_2}{O_3}$-NaOH impregnation was possible to extend the delignification more than 80%. Considering high pulp yield with lower lignin content from steam explosion treated wood, it might be profitable to end the cook at a high kappa number instead of a low kappa number, and continuously apply the oxygen delignification, in order to better quality pulp.

• Journal of Nutrition and Health
• /
• v.15 no.2
• /
• pp.83-90
• /
• 1982

This study was attempted to investigate the effects of adding gelatinized waxy rice flour, wheat flour, and Xanthan Gum to rice flour on the preparation and (quality) of dried noodles. 1) Rice flour demonstrated higher maximum viscosity value as determined by Amylograph than wheat flour. Among the composite flour mixture (Rice Flour 85+Gelatinized Waxy Rice Flour 15 + Xanthan Gum 2%) showed the highest viscosity value and (RF 35+ GWRF 15 + Wheat Flour 50) had the lowest. (RF 35 + GWRF 15 +WF 50) demonstrated gelatinization characteristics which is quite similar to that of wheat flour. 2) Forty and 50% replacement of rice flour and gelatinized waxy rice flour (15%) mixture by wheat flour improved significantly noodle making characteristics and cooking quality of noodles. 3) The addition of 2% XG to (RF 45 + GWRF 15 + WF 40) was effective on noodle making properties and on binding properties of cooked noodles. 4) The cooked noodle made of composite flour (RF 45 + GWRF 15 + WF 40 + XG 2%) received the highest total sensory evaluation score among the testing samples, and it was not significantly different from that of wheat flour.