• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.65-65
• /
• 2012

Copper zinc tin sulfide ($Cu_2ZnSnS_4$, CZTS) is a very promising material as a low cost absorber alternative to other chalcopyrite-type semiconductors based on Ga or In because of the abundant and economical elements. In addition, CZTS has a band-gap energy of 1.4~1.5eV and large absorption coefficient over ${\sim}10^4cm^{-1}$, which is similar to those of $Cu(In,Ga)Se_2$(CIGS) regarded as one of the most successful absorber materials for high efficient solar cell. Most previous works on the fabrication of CZTS thin films were based on the vacuum deposition such as thermal evaporation and RF magnetron sputtering. Although the vacuum deposition has been widely adopted, it is quite expensive and complicated. In this regard, the solution processes such as sol-gel method, nanocrystal dispersion and hybrid slurry method have been developed for easy and cost-effective fabrication of CZTS film. Among these methods, the hybrid slurry method is favorable to make high crystalline and dense absorber layer. However, this method has the demerit using the toxic and explosive hydrazine solvent, which has severe limitation for common use. With these considerations, it is highly desirable to develop a robust, easily scalable and relatively safe solution-based process for the fabrication of a high quality CZTS absorber layer. Here, we demonstrate the fabrication of a high quality CZTS absorber layer with a thickness of 1.5~2.0 ${\mu}m$ and micrometer-scaled grains using two different non-vacuum approaches. The first solution-processing approach includes air-stable non-toxic solvent-based inks in which the commercially available precursor nanoparticles are dispersed in ethanol. Our readily achievable air-stable precursor ink, without the involvement of complex particle synthesis, high toxic solvents, or organic additives, facilitates a convenient method to fabricate a high quality CZTS absorber layer with uniform surface composition and across the film depth when annealed at $530^{\circ}C$. The conversion efficiency and fill factor for the non-toxic ink based solar cells are 5.14% and 52.8%, respectively. The other method is based on the nanocrystal dispersions that are a key ingredient in the deposition of thermally annealed absorber layers. We report a facile synthetic method to produce phase-pure CZTS nanocrystals capped with less toxic and more easily removable ligands. The resulting CZTS nanoparticle dispersion enables us to fabricate uniform, crack-free absorber layer onto Mo-coated soda-lime glass at $500^{\circ}C$, which exhibits a robust and reproducible photovoltaic response. Our simple and less-toxic approach for the fabrication of CZTS layer, reported here, will be the first step in realizing the low-cost solution-processed CZTS solar cell with high efficiency.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.380-387
• /
• 2014

Piper Alpha disaster drew attention to the damage likely to arise from explosions and fires on an offshore platform. And great concerns have been increased to prevent these hazards. Blast wall is one of the passive safety systems; it plays a key part of minimizing the consequences. However, a buckling due to explosion loads is a factor which can reduce the strength of blast wall. The buckling often occurs between web and flange at the center of blast wall. This study aims to find a solution for reinforcing its strength by installing a flat plate at the spot where the buckling occurs. First of all, ANSYS finite element method is adopted to numerically compute the structural resistance characteristic of blast wall by using a quasi-static approach. Sequentially, the impact response characteristics of blast wall are investigated the effect on thickness of flat plate by using ANSYS/LS-DYNA. Finally, pressure-impulse diagrams (P-I diagram) are presented to permit easy assessment of structural response characteristics of stiffened blast wall. In this study, effective use is made to increase structural intensity. of blast wall and acquired important insights have been documented.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.26 no.4
• /
• pp.1-14
• /
• 2013

Objectives : The purpose of this study is to investigate effects of Syzygium aromaticum (SAE) spread on the allergic contact dermatitis caused by 2,4-dinitro-chlorobezene (DNCB). Methods : Forty-two mice were divided into six groups ; normal, negative control (DNCB-treated), positive control (DNCB + 1% pimecrolimus), experimental group I, II and III. control and experimental groups were induced allergic contact dermatitis by DNCB. Experimental group I(DNCB + 0.2% SAE), II(DNCB + 1% SAE) and III(DNCB + 5% SAE) were spread SAE and positive control was spread the 1% pimecrolimus. In this study, effect of SAE on clinical aspects on the skin, histopathological change, the blood level of IgE, cytokines, histamine were investigated. In addition, effect of SAE on spleen $CD4^+/CD8^+$ T cell subset was investigated. Results : 1. In experimental group I, II and III, erythemas and edema were more reduced than negative control. 2. In experimental group I, II and III inflammatory edema and the numbers of infiltrated inflammatory cells were more reduced than negative control. 3. In experimental group I, II and III, clinical skin score was more reduced than negative control. 4. In experimental group II and III, the thickness of skin was statistically significant reduced than negative control. 5. In experimental group II and III, histamine release was statistically significant reduced than negative control in dose-dependantly. 6. In experimental group II and III, cytokines (IL-1${\beta}$, TNF-${\alpha}$, IL-4, IL-6, IL-10) were statistically significant reduced than negative control in dose-dependantly. 7. In experimental group I, II and III, the level of total IgE was statistically significant reduced than negative control in dose-dependantly. 8. In experimental group III, $CD4^+$ and $CD8^+$ T cells were statistically significant decreased similar to the positive control. Conclusions : According to above experiments, Syzygium aromaticum(SAE) was effective on allergic contact dermatitis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.3
• /
• pp.191-197
• /
• 1988

Sorption properties of corn starch(CS) and Soy protein isolates(SPI) in plastic films packaging were investigates for binary system. The mixture were sealed in plastic films of low density polyethylene(LDPE), oriented polypropylene(OPP) and LDPE/OPP coated film and packaging effect on the changes of moisture sorption during storage at $40^{\circ}C$ were studied. The following results were obtained. The water vapor permeability of material films was $32.6g/m^2/24hrs(below\;g)$ for 0.02mm LDPE film, 14.01g for 0.04mm LDPE film, 7.30g for 0.02mm OPP film, 3.37g for 0.04mm OPP film and 4.869 for 0.02mm LDPE/0.02 mm OPP confine film at $40^{\cire}C$ 90%RH, therefore the OPP film was more effective than LDPE film on the resistance of relative humidity. And the OPP film packaging sealed mixture of food samples was also more elective then LDPE film, having same thickness for increase of water vapor permeability during storage at $40^{\cire}C$. A general increase in sorption rate was found more in SPI than CS in the packaged mixtures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.42-50
• /
• 1984

The Jung Kwa is of the traditional Han Kwa which boiled in sugar or honey. This study summerized the history of the Jung Kwa by the cook book which introduced 1600 years from now. The purpose of this study was to find out the most scientific and effective preparation process of 'Jung Kwa' of lotus root by the preference sensory test and the mechanical method of penetrometer. In this paper the effect of changes in boiling method mixture ratio of water, sugar, and honey, boiling time, upon the appearance, taste, texture and color of 'Jung Kwa' has been studied. The results are as follows : (1) The Jung Kwas which introduced in the cook books are 34 different kinds and the most well-known one among them is lotus root Jung Kwa. (2) In the beginning Jung Kwa boiled in honey but, Jung Kwa which boiled in sugar was introduced at first in 'Eum Sick Bup' Published in 1843. (3) The lotus root cut in a thickness of 7 mm, water 150 ml lotus root 100 g and vinegar 4 ml are mixed and boiled for 12 minutes. To prevent from browning reaction vinegar is added, In this case, the hardness is 5.86 min.(5) The most proper quantity of water in appearance, taste, texture and color is 200 ml. In this case, the hardness is 3.3 mm. (5) The most proper quantity of sugar in appearance, taste, texture and color is 30 g. In this case, the hardness is 3.8 mm.(6) The most proper quantity of honey in appearance, taste, texture and color is 40 g. In this case, the hardness is 4.9 mm.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.209-212
• /
• 2008

DBS method of underground works can reduce the term of works for manufacturing the underground members in factory and producing members in modularization, apart from that, the horizontal member could be used as permanent members, which are the advantages of this method. As the component element of DBS method, in order th transfer the vertical load on horizontal member to the column during the construction or in service, developed ${\sharp}$ shaped double beam-column connection is dominated by shear failure in the complicated state of multi-axial stresses. In this study, in order to check the shear-failure mechanism of ${\sharp}$ shaped connection of double beam-column and an increase of shear internal force with the thickness of the steel plate. 7 specimens were made and one-way static tests. All of the specimens were subjected to brittle failure. Constraint of slab will increase its shear strength by 1.06${\sim}$1.48 times. Shear strength of slabs with different constraints steel plate in two-way increase more than which are same. So the slab with different constraints steel plate will be more effective.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.103-110
• /
• 2011

This study is to comparatively analyze the characteristics of pH decrease in recycled fine aggregates for embankment and landfill produced from waste concrete by using natural process and artificial process. The result was as follows In case of recycled fine aggregates left outdoor, it was found that pH level was decreased if the thickness of embankment becomes thinner, or the materials left outdoors owing to high concentration of $CO_2$ in atmosphere caused by respirations of people. When the air was permeated, pH level was decreased more effectively. It was analyzed that this phenomenon was caused by efficient supply of $CO_2$ in the recycled fine aggregates owing to high-pressure ventilators. In case of water spraying treatment, sprayed water facilitated hydration of unhydrated cement to dissolve calcium hydroxides which neutralized $CO_2$ in the atmosphere during desiccation process and decrease pH level by a considerable margin. In case of Immersed treatment, decrease of pH was not sufficient. When facilitating the supply of $CO_2$, pH level of the recycled fine aggregates was decreased by the largest margin. It was analyzed that this phenomenon was caused by efficient supply of $CO_2$. From the above results, it was analyzed that the most effective method of reducing pH level of the recycled fine aggregates from the aspects of pH reduction performance, economic efficiency and workability was repeated wet-dry cycles of spraying water to the aggregates in the proportion of 1:0.5 by weight and then treating by forcefully blowing $CO_2$ gas into the aggregates.

• Journal of Korean Medicine Rehabilitation
• /
• v.25 no.1
• /
• pp.27-44
• /
• 2015

Objectives This study was carried out to find the effects of Gami-cheongyulsaseub-tang (hereinafter referred to GCST) on the inhibition of zymosan-induced pain in rats and collagen II-induced arthritis (CIA) in DBA/1J mouse. Methods As an acute inflammatory pain model, peripheral inflammation was induced by intraplantar injection of zymosan into the right hind paw in rats and then the hyperalgesia and pain regulating factors in spinal cord were analyzed. As a chronic inflammation model, the mixture of collagen II and complete Freund's adjuvant was treated into mice to establish rheumatoid arthritis and then body weight, thickness of hind paw, pathological change of spleen, immunological rheumatoid factor (IgG1, IgG2a, IgG2b, IgM and anti-collagen II), pro-inflammatory cytokines, and bone injury were analyzed. Results In the acute inflammatory pain model, GCST significantly inhibited the thermal and mechanical hyperalgesia and the pain regulating factors, including Fos, CD11b, PKA and PKC, in the spinal cord with a dose-dependent manner. In the chronic rheumatoid arthritis model, GCST administration decreased arthritic index and paw edema as compared with CIA control group. In particular, GCST reduced significantly the serum levels of total IgG2a, IgG2b, IgM, and specific anti-collagen II, but not total IgG1. GCST also resulted in the attenuation of bone injury and spleen enlargement/adhesion in CIA mice. Moreover, the secretion of pro-inflammatory cytokines TNF-${\alpha}$ and IL-$1{\beta}$ in CIA mice was significantly reduced by GCST in a dose-dependent manner. Conclusions Comparison of the results in this study showed that GCST had anti-nociceptive and immunomodulatory effects. These data imply that GCST can be used as an effective drug for not only rheumatoid arthritic pain but also other auto-immune diseases.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.188-196
• /
• 2015

Endodontic management of an immature permanent tooth with dens invaginatus poses a challenge to efficient treatment planning for the clinicians. Because it is difficult to shape, disinfect, and seal the canal space effectively, teeth with complex root canal structures often require particularly extensive and thorough treatment approaches. The purpose of this case report was to share clinical insight from the results of short-term follow-ups after regenerative endodontic treatment with a dens invaginatus. Two immature maxillary lateral incisors with Oehlers type I and III dens invaginatus and infected necrotic pulp were treated using regenerative endodontic procedures. For the type III dens invaginatus case, an unusual approach toward redesigning the complex internal structure was taken, in order to have sufficient infection control and sealing. Cone-beam computed tomography (CBCT) and a surgical operating microscope were used to aid visualization and treatment. As a result, regenerative endodontic treatment appears to be effective for managing immature permanent teeth with complex dens invaginatus, and can lead not only to clinical and radiographic resolution, but also increased thickness of the dentinal walls.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.