• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.454-464
• /
• 1986

To find main factors to affect tobacco culture and quality, NC 2326 (Nicotiana tabacum L.) was cultivated in Korea and in the United States under different plant density, fertilization, mulching and curing. Among the chemical characteristics of the both experimental soils, the organic matters were similar concentration in both locations but effective phosphorous contents were higher in Oxford in the United States. Plant height, length and width of the largest leaf, leaf thickness, and midrib ratios were larger in Oxford than in Suwon in Korea. Also they were larger in non mulching system than in mulching system. But the total numbers of the leaves were decreased in non mulching system. The content of nicotine was higher in the plant grown in Suwon than in Oxford. The concentrations of nicotine and sugar tend to increase in mulching system comparing of non mulching system. During the growing, the concentration of non-volatile organic acids was higher in Suwon, while it was lower in cured leaf produced in Suwon. Also the contents of total fatty acids were lower in the harvested leaf grown in Suwon, but not in cured tobacco. Forty three compounds identified among the volatile oils from these experimental samples were quantified. The concentrations of the major components related to the tobacco flavour such as damascone, damascenone, solanone, nor-solanadione, and megastigmatrienones were higher in the cured tobacco produced in Oxford rather than in Suwon.

• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.385-394
• /
• 2001

There are serious damage of people and properties every year due to landslides that are occurred by heavy rain. Because these phenomena repeat and the heavy rain is not an atmospheric anomaly, the counter plan becomes necessary. The study area, Ulsan, is one of the seven metropolitan, and largest cities of Korea and has many large facilities such as petrochemical complex and factories of automobile and shipbuilding. So it is necessary assess the landslide hazard potential. In the study. the three steps of landslide hazard assessment techniques such as susceptibility, possibility, and risk were performed to the study area using GIS. For the analyses, the topographic, geologic, soil, forest, meteorological, and population and facility spatial database were constructed. Landslide susceptibility representing how susceptible to a given area was assessed by overlay of the slope, aspect, curvature of topography from the topographic DB, type, material, drainage and effective thickness of soil from the soil DB, lype age, diameter and density from forest DB and land use. Then landslide possibility representing how possible to landslide was assessed by overlay of the susceptibility and rainfall frequency map, Finally, landslide risk representing how dangerous to people and facility was assessed by overlay of the possibil. ity and the population and facility density maps The assessment results can be used to urban and land use plan for landslide hazard prevention.

• Applied Biological Chemistry
• /
• v.36 no.1
• /
• pp.51-57
• /
• 1993

For the effective untilization of mackerel as a food source, the most desirable processing conditions of mackerel based burger were investigated. The mackerel was beheaded, gutted, washed with tap water and deboned with the meat seperator. Then it was substituted with 15% pig meat and mixed with additives such as 18.3% emulsion curd, 3.0% soybean protein, 2.0% sodium chloride, 2.0% sugar, 0.1% monosodium glutamate, 0.2% polyphosphate, 0.4% sodium bicarbonate, 0.5% beef extract powder, 0.3% onion powder, 0.1% ginger powder and 0.1% garlic powder to a mixed meat. The seasoned mackerel based meat was molded to a thickness of 10 mm and a diameter of 80 mm, fried for 2 min. The examined mackerel based burger was superior to mackerel based burger by another processing conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.88-94
• /
• 2005

This paper is a study on the blade-type optical bench satisfying stiffness and thermal pointing error requirements for earth observation satellite. According to shape requirements, optical bench is designed. Because it does not satisfy the stiffness requirement, the stiffener is added on the outer/inner area of optical bench. But it does not meet the thermal pointing error requirement. So symmetrical structure is suggested with platform support structure attached on the upper/lower part of platform. Although it has better value than previous case, it still does not meet the thermal pointing error requirement. Based on the results of prior cases, optical bench finally designed, which satisfied both the stiffness and thermal pointing error requirements. Next conclusions follow from this design. It is efficient to increase thickness of platform facesheet, add stiffener and increase blade number to raise stiffness. It is effective to connect component consisting of same material and design optical bench having symmetrical structure to lower thermal pointing error.

• Applied Microscopy
• /
• v.23 no.1
• /
• pp.35-55
• /
• 1993

cis-Dichlorodiammineplatinum (II) (cis-Platin), a metallic compound, has widely been used as an effective anticancer chemotherapeutic agent. The precise mechanism of action of this agent is still unknown, but it is postulated that cis-Platin may act on the cancer cell like bifunctional alkylating agents. Although this agent is very beneficial to the patients with cervical cancer, germinoma of testis, neuroblastoma and others, it may also damage to the normal cell so that many side effects; severe hemorrhagic enterocolitis, bone marrow depression, renal damage and liver damage will develope. This experiment has been undertaken to pursue the cytotoxic effects of the cis-Platin on the ultrastructures of the interalveolar septum in the mouse lung. A total of 55 healthy male mice of ICR strain were used as experimental animals and divided into 5 mice of normal control group and 50 mice of cis-Platin treated group. The mice of cis-Platin treated group were sacrificed by carotid exsanguination at 6, 12, 24 hours, 3 days and 7 days after intraperitoneal injection of 6.0 mg of cis-Platin ($Abiplatin^R$ Abic Co. Ltd.) per kg of mouse body weight. The specimen obtained from the lower lobe of left lung were sliced into $1mm^3$ and prefixed with 2% glutaraldehyde -2.5% paraformaldehyde solution prepared with Millonig's phosphatae buffer solution (pH 7.4) at $4^{\circ}C$ for 3-4 hours. After postfixation with 1% osmium tetroxide solution all specimens were embedded in Epon 812. Ultrathin sections about $600-800{\AA}$ in thickness were stained with uranyl acetate and lead citrate and observed with Hitachi-600 electron microscope. The results obtained were as follows: 1. Local swellings with increase of electron density and number of pinocytic vesicles in the cytoplasms of the type I pneumocyte and endothelial cell of the blood air barrier in interalveolar septum of cis-platin treated mice were observed. 2. Cisternae of rough endoplasmic reticulum were dilated and sacculated in association with detachment of membrane bound ribosomes of the type II pneumocyte in interalveolar septum of cis-Platin treated mice. 3. Swollon mitochondria with uneven electron density of their matrix were observed in the type II pneumocyte of interalveolar septum in the cis-Platin treated mice. 4. The lamellae of lammelar bodies in type II pneumocyte of interalveolar septum in cis-Platin treated mice were devoided or transformed into homogeneous electron dense material. It is consequently suggested that cis-Platin would induce the cellular edema of type I pneumocyte and endothelial cell, and degenerative changes of cytoplasmic organelles of the type II pneumocyte in the interalveolar septum of the mouse lung.

• Journal of the Korean Society of Food Culture
• /
• v.7 no.4
• /
• pp.297-301
• /
• 1992

To investigate effects of the surface finishing methods (A : conventional press stone, B : enclosing in polyethylene (PE) bag, C : press-tone wrapped with PE film and D : covered with Chinese cabbage leaves 4cm in thickness on Kimchi) on Kimchi quality, pH-values, redness, film forming yeast growth, hardness and sensory quality of Kimchi during storage (for 60 days, at $10{\pm}5^{\circ}C$) in glass vessel $(11{\times}30cm)$ were investigated. pH of the top layer of A, C and D sample were higher than the optimum pH (4.2) of Kimchi, film forming yeast occurred on the surface of Kimchi, color of top layer Kimchi juice was darkened, and panel score of freshness and firmness was significantly worse (p<0.01) than that of sample B. However, in the case of Kimchi stored in PE bag (B), film forming yeast were can't detected visually in the surface of Kimchi, pH values were low as good quality Kimchi, freshness and firmness panel scores and hardness were significantly better (p<0.01) than A, C and D, and redness of juice of top layer of B was also preserved clearly for 60 days. Accordingly among the four surface finishing methods, the B-method was most effective in preserving of y of Kimchi.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.227-234
• /
• 2010

Purpose: The cleaning effect of protein deposit and the change of contact lens parameters by ultrasonic cleaner for eye glasses on the soft contact lenses were investigated. Methods: Etafilcon A contact lenses contaminated with protein, was ultrasonicated by ultrasonic cleaner for eye glasses and for the control group, spoiled contact lenses were cleaned by multi-purpose solution. The remaining protein deposits on the contact lenses were determined after extraction and the changes of overall diameter, base curve, center thickness power, and water contents on contact lenses were measured and surfaces of contact lenses were observed by scanning electron microscope. Results: The cleaning efficacies of multi-purpose solution on protein deposited etafilcon A contact lenses were 6.08%, and 23.73~33.92% in the group of ultrasonic cleaner for eye glasses with multi-purpose solution and 0~12.99% in the group of ultrasonic clear for contact lens with multipurpose solution depending on the treatment time. The changes of parameters and surface on contact lenses by ultrasonication were not observed. Conclusions: Ultrasonic cleaner for eye glasses can be used to eliminate protein deposits for the diagnostic soft contact lens in the office since it was effective to eliminate protein deposits and not caused change of parameters on soft contact lenses.

• Asian Journal of Turfgrass Science
• /
• v.12 no.3
• /
• pp.173-182
• /
• 1998

This study was conducted to evaluate the effect of plant growth inhibitors on "Penncross" creeping bentgrass in the green of golf course for increasing the summer quality. Chlormequat chloride (C) 250$\times$, 500$\times$, 1000$\times$, daminozide (D) 50$\times$, 100$\times$, 200$\times$, paclobutralzol (P) 1000$\times$, 2000$\times$, 4000$\times$, trinexpac-ethyl (T) 1000$\times$, 2000$\times$, 4000$\times$, uniconazole (U) 25$\times$, 50$\times$, 100$\times$ with three concentrations, respectively, were applied to creeping bentgrass. The leaf length, leaf width, and internode length of stolon were inhibited by all plant growth retardants applied as compared to that of control in which D-50, T-2000, and trinexpac-ethyl were the most effective among treatments on the inhibition of leaf length and internode length of stolen, respectively. Leaf thickness increased more in the treatments of C-250, D-50. T-2000 and T-4000 than any other treatments. On the other hand, shoot density which was represented by number of leaves per unit area was found to be the highest in P-2000 and P-4000 treatment. In this case, all plant growth retardants with no significant differences showed increase of 15-20% in density as compared to control. Total dry weight increment was higher in P-2000 and P-4000 while leaf dry weight increment was higher in T-4000. and U-25 and 50 than other treatments. According to the visual evaluation for the purpose of turf quality measurement, it was found that paclo-butralzol, trinexpac-ethyl and uniconazole were not suitable for green maintenance and extension because of making leaves to yellow. In conclusion, it was postulated that C-250, D-50, and T-4000 had possibility to use practically in the green area of golf course.lf course.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.151-162
• /
• 2012

Analysis for back fat thickness (BFAT) and daily body weight gains from birth to the end of a performance test were conducted to find an optimal method for estimation of weaning age effects and to ascertain impacts of weaning age on the growth performance of purebred Berkshire pigs from a closed population in Korea. Individual body weights were measured at birth (B), at weaning (W: mean, 22.9 d), at the beginning of the performance test (P: mean, 72.7 d), and at the end of the performance test (T: mean, 152.4 d). Further, the average daily gains in body weight (ADG) of 3,713 pigs were analyzed for the following periods: B to W (DGBW), W to P (DGWP), P to T (DGPT), B to P (DGBP), B to T (DGBT), and W to T (DGWT). Weaning ages ranged from 17 to 34 d, and were treated as fixed (WF), random with (WC) and random without (WU) consideration of an empirical relationship between weaning ages in the models. WF and WC produced the lowest AIC (Akaike Information Criterion) and least fractions of error variance components in multi-traits analysis, respectively. The fractions of variances due to diverse weaning age and the weaning age correlations among ADGs of different stages (when no overlapping allowed) by WC ranged from 0.09 to 0.35 and from -0.03 to 0.44, respectively. The maximum weaning age effects and optimal back fat thicknesses were attained at weaning ages of 27 to 32 d. With the exception of DGBW, the effects of weaning age on the ADGs increased (ranging from 1.50 g/d to 7.14 g/d) with increased weaning age. In addition, BFAT was reduced by 0.106 mm per increased day in weaning age. In conclusion, WC produced reasonable weaning age correlations, and improved the fitness of the model. Weaning age was one of crucial factors (comparable with heritability) influencing growth performance in Berkshire pigs. Further, these studies suggest that increasing weaning age up to 32 d can be an effective management strategy to improve growth performance. However, additional investigations of the costs and losses related to extension of the suckling period and on the extended range of weaning age are necessary to determine the productivity and safety of this practice in a commercial herd and production system.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.82-89
• /
• 2002

The inherent strain method is known to be very effective in predicting the plate deformation by line heating. Traditionally the inherent strain regions have been determined from the temperature distribution and the phase transformation regions(Ac3) of welding experiments. Since the phenomena of line heating are similar to those of welding, the experimental results under the same welding conditions have been applied directly to line heating analysis. The results cannot, however, reflect the effect of heating pattern and plate thickness. Besides, water-cooling in the actual heating process can alter the steel's phase to martensite and shear plastic deformation occurs during the transformation. In this study, the experimental measurement of temperature distribution was substituted with a transient heat transfer analysis using FEM so that we could obtain the temperature distribution according to heat flux models of the heating pass. In order to consider plastic strains occurring additionally under phase transformation, inherent strain regions were assumed to be limited to the eutectoid temperature(Ac1). Using the regions, plate deformations could be predicted to validate our method and the results were in good agreement with the experimental ones