• Tribology and Lubricants
• /
• v.24 no.5
• /
• pp.250-254
• /
• 2008

The steam generator of nuclear power plant is composed with the bundles of long tubes. It is exposed fluid flow and weak in the vibration. The tubes are supported by anti-vibration bars. Due to vibration the wear damage is called as the fretting wear. It should be minimized for the safety of the plants. The hard coatings are very effective to reduce the amount of wear. The coatings of TiN and CrN are introduced in this study to protect the fretting surfaces. The tube-on-flat type tester was used for fretting wear tests. The results show that the wear amounts of the coated tubes were decreased depending on coating thickness. CrN was very effective to reduce the wear. In case of TiN the wear amounts were dependent on the coating thickness. Thick coating of TiN was very effective for wear resistance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.2
• /
• pp.253-260
• /
• 2002

It is known that frost formation on surfaces of the heat exchanger seriously affects the performance of the refrigeration system. Accordingly, defrosting should follow, and effective defrosting is possible only when both analytic tools and comprehensive experimental data on frost formation are assailable. An experimental investigation was undertaken to characterize the effect of environmental parameters on frost formation on a horizontal cylinder in cross uniform flow. Several experiments were carried out with various environmental parameters such as inlet air temperature, inlet air humidity, air velocity and cooling surface temperature. Frost thickness, mass, surface temperature and cylinder inner and outer temperature were measured at front and rear positions of the cylinder. Thickness, mass, density, and effective thermal conductivity of the frost layer were obtained from measured data and effects of environmental parameters on the frost formation were analyzed. Data from experiments were correlated using dimensionless variables.

• Steel and Composite Structures
• /
• v.51 no.3
• /
• pp.325-335
• /
• 2024

Yielding dampers exhibit varying cyclic behavior based on their geometry. These dampers not only increase the energy dissipation of the structure but also increase the strength and stiffness of the structure. In this study, parametric investigations were carried out to explore the impact of angled U-shape damper (AUSD) dimensions on its cyclic behavior. Initially, the numerical model was calibrated using the experimental specimen. Subsequently, analytical equations were presented to calculate the yield strength and elastic stiffness, which agreed with the experimental results. The outcomes of the parametric studies encompassed ultimate strength, effective stiffness, energy dissipation, and equivalent viscous damper ratio (EVDR). These output parameters were compared with similar dampers. Also, the magnitude of the effect of damper dimensions on the results was investigated. The results of parametric studies showed that the yield strength is independent of the damper width. The length and thickness of the damper have the greatest effect on the elastic stiffness. Reducing length and width resulted in increased energy dissipation, effective stiffness, and ultimate strength. Damper width had a more significant effect on EVDR than its length. On average, every 5 mm increase in damper thickness resulted in a 3.6 times increase in energy dissipation, 3 times the effective stiffness, and 3 times the ultimate strength of the model. Every 15 mm reduction in damper width and length increased energy dissipation by 14% and 24%, respectively.

• Physical Therapy Korea
• /
• v.23 no.2
• /
• pp.20-34
• /
• 2016

Background: It is necessary to find and develop the effective way of intervention for patients with neck pain, since the neck pain is becoming increasingly common throughout the world. To identify the altered motor control in patient with neck pain would be informative to find and develop the effective way of intervention. Objects: The aim of this study was to review literature regarding the altered motor control in patients with neck pain, measured by using surface electromyography (sEMG), ultrasonography, and functional magnetic resonance imaging (fMRI), and to suggest prospective research work on neck pain. Methods: Case-control (neck pain/healthy) studies published between 2004 and 2015 that investigated neck muscle activation, thickness, cross-sectional area, and fat infiltrate were searched in Scopus, PubMed, and ScienceDirect. Twenty-eight articles were included in this study. Results: sEMG, ultrasonography, and fMRI were used complementarily to investigate the altered superficial and deep neck muscle activation, thickness, cross-sectional area, and fat infiltrate in patients with neck pain. They showed the following altered motor control when compared retrospectively with healthy subjects or during specific functional tasks: (1) increased superficial muscle activation, (2) lesser deep muscle thickness, (3) smaller cross-sectional area of the deep muscle, and (4) greater fat infiltrate in deep muscles. In particular, among the women, the office workers showed higher muscle activation of superficial neck muscles during functional tasks, although they did not have neck pain, than those who were not office workers. Conclusion: Studies revealed that patients with neck pain showed an altered motor control when compared with healthy subjects by using various assessment modalities. Understanding this phenomenon would help researchers design an effective intervention for alleviating neck pain or to evaluate the effectiveness of the intervention. In addition, we recommend that female office workers take measures to care for their necks before developing neck pain.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.353-360
• /
• 2014

The model ice is created at KRISO (Korea Research Institute for Ships and Ocean Engineering) ice basin where model ship is tested to obtain the necessary data in order to design the ice breaking vessels and ocean structures operating in the northern pole sea area. Through the model ship test, ice breaking, clearing, ice-ship and ice-propeller interaction behavior can be obtained. Since mechanical properties of ice plate are required for the model test, some tests are performed to obtain the properties in this paper. First, ultrasonic devide is used to measure the thickness of the model ice plate and the results show the possibility of using ultrasonic method, yet more sophisticated device or special sensors are required to measure the ice thickness completely. And the defection of ice plate is measured using LVDT to compute the characteristic length of ice plate on the fluid, which is used to get the effective Young's modulus of model ice.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.477-482
• /
• 2015

Workers in nuclear medicine have performed various tasks such as production, distribution, preparation and injection of radioisotope. This process could cause high radiation exposure to wokers' hand. The purpose of this study was to investigate shielding effect for r-rays of 140 and 511 keV by using Monte-carlo simulation. As a result, it was effective, regardless of lead thickness for radiation shielding in 140 keV r-ray. However, it was effective in shielding material with thickness of more than only 1.1 mm in 511keV r-ray. And also it doesn't effective in less than 1.1 mm due to secondary scatter ray and exposure dose was rather increased. Consequently, energy of radionuclide and thickness of shielding materials should be considered to reduce radiation exposure.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.57-62
• /
• 2012

In this paper, numerical analysis by finite element method, parameter design by the Taguchi method and ANOVA method were used to analyze about effect of design deviations and thickness variations on warpage of FCCSP substrate. Based on the computed results, it was known that core material in substrate was the most determining deviation for reducing warpage. Solder resist, prepreg and circuit layer were insignificant effect on warpage relatively. But these results meant not thickness effect was little importance but mechanical properties of core material were very effective. Warpage decreased as Solder resist and circuit layer thickness decreased but effect of prepreg thickness was conversely. Also, these results showed substrate warpage would be increased to maximum 40% as thickness deviation combination. It meant warpage was affected by thickness tolerance under manufacturing process even if it were met quality requirements. Threfore, it was strongly recommended that substrate thickness deviation should be optimized and controlled precisely to reduce warpage in manufacturing process.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.88-95
• /
• 2019

The purpose of this study was to figure out the various characteristics of the thickness sensation among elements of tactile sensation using psychophysical method. Firstly, panel screening was processed to select sensitive thickness panel using the triangle test. As a result of discriminating the paper thickness difference from 1 to 4 pieces, the female students perceived the thickness difference more sensitively than the male students (p<.05). Secondly, JND (Just Noticeable Difference) was obtained at percentage of stimulus detection rate in order to detect the degree of thickness difference by psychophysical method. It was found that the difference threshold of the entire group was about 0.125mm, with male group being about 0.178mm and female group being about 0.095mm. Thirdly, Weber's law was used to find the minimum discrimination difference between the stimuli. The experiments were conducted by increasing the paper's base thickness from 1.950mm to 1.330mm, and it was found that the difference tendency increased when the size of the basic stimulus increased. At this time, the minimum discrimination difference increased, but the Weber' fraction was not proportional to the magnitude of the stimulus. The significance of this study was that sensory evaluation was applied to research in the fields of clothing science and it seems effective to further screen and train sensitive students as material discrimination experts.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.2
• /
• pp.89-94
• /
• 2016

Objective: This study was aimed to compare the thickness and pennation angle of gastrocnemius through ultrasonography during the heel-drop exercise on ankle dorsiflexion angle. Design: Cross-sectional study. Methods: Nineteen normal adults in their 20s had voluntarily participated in this study. All subjects performed the ankle heel-drop exercise with ankle dorsiflexed to $0^{\circ}$, $10^{\circ}$, and $20^{\circ}$: heel-drop exercise with ankle dorsiflexed to $0^{\circ}$ was executed on floor-level, heel-drop exercise with ankle dorsiflexed to $10^{\circ}$ on a wooden-block of 2.3 cm in height, and heel-drop exercise with ankle dorsiflexed to $20^{\circ}$ on a wooden-block of 5.5 cm in height. In each regimen, the subjects completed a session of 100 heel-drop exercises (10 repetitions${\times}$10 sets; with 30 seconds rest following each set; with 24 hours rest following each exercise). Before and immediately after each heel-drop exercise, the thickness and pennation angle of gastrocnemius were measured using an ultrasonography. Results: After the performance of the heel drop exercises with ankle dorsiflexed to $0^{\circ}$, $10^{\circ}$, and $20^{\circ}$, the thickness of the gastrocnemius was significantly higher than pre-exercise (p<0.05), and furthermore heel-drop exercise with ankle dorsiflexed to $10^{\circ}$ was significantly higher than exercise with the ankle dorsiflexed to $0^{\circ}$ (p<0.05). However, as for the pennation angle of the gastrocnemius, there were no significant changes after each heel-drop exercise. Conclusions: This finding suggest that the heel-drop exercise with ankle dorsiflexed to $0^{\circ}$, $10^{\circ}$, and $20^{\circ}$ is effective on the strengthening of the gastrocnemius. Furthermore, the heel-drop exercise with the ankle dorsiflexed to $10^{\circ}$ is more effective than with the ankle dorsiflexed to $0^{\circ}$.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.3
• /
• pp.87-98
• /
• 2014

Objectives The present study aimed to investigate the effects of acupuncture and herbal external preparation on wound healing procedure in a deep partial thickness burn model in rats. Methods A total of 40 male Sprague-Dawley rats were allocated into four groups with an equal number in each group: acupuncture treatment group, herbal external perparation group, Silver sulfadiazine dressing group and control group. We describe the effect of acupuncture and herbal external preparation on morphologic and histologic changes, epithelial growth factor (EGF), hematological value of the deep partial thickness burn wound in rats. Results At 21th day after wounding the wound size in acupuncture treat group and herbal external preparation group were decreased more significantly compared to control group. In addition, epidermal regeneration on acupuncture treatment was than other treatment and control group in histological finding. Hematological findings revealed that acupuncture treatment group and herbal external prepartion group was more effective than control group in reducing inflammation response induced by burn. In acupuncture treated group, neutrophil and leukocyte level were significantly decreased compared to other treatment group. Also, this study showed that EGF was obviously expressed in nascent tissue when wounds were treated with the acupuncture and herbal external preparation after injury. In particular, acupuncture treatment group had a significant increase of EGF expression in burn wound healing area when compared with the other treatment groups. Conclusions These findings suggest that acupuncture and herbal external prepration may improve burn wound healing through decreasing inflammatory reaction, increasing tissue regeneration and expression of EGF. Moreover, acupuncture treatment could be more effective in comparison with Silver sulfadiazine dressing.