• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.70-75
• /
• 2010

The aim of this study is to evaluate the axial residual stress in multi-pass drawn high carbon steel wire by using FE analysis and XRD. When FE analysis is applied to evaluate the residual stress in drawn wire of multi-pass drawing process, obtaining the reliable effective stress-strain curve at high strain is very important. In this study, a model, which can express the reliable effective stress-strain curve at high strain, is introduced based on the Bridgman correction and tensile test for multi-pass drawn high carbon steel wires. By using the introduced model, FE analysis was carried out to evaluate the axial residual stress in the drawn wires. Finally, the effectiveness of the FE analysis with the introduced stress-strain relation was verified by the measurement of residual stress in the drawn wires through XRD. As a result, the evaluated residual stress of FE analysis shows good agreement with the measured residual stress.

• 소성∙가공
• /
• 제5권4호
• /
• pp.327-336
• /
• 1996

The effect of dynamic strain aging on high temperature deformation behaviour of the A-Mg alloy was investigated by strain rate change tests and stress relaxation tests between 20$0^{\circ}C$and 50$0^{\circ}C$. Yield point, short stress transient and periodic discontinuities on the stress-strain curve were considered as an evidence of the effect of dynamic strain aging. With this criterion two distinct strain rate-temperature regimes could be manifested. Dynamic strain aging was considered to be effective in the high temperature-low strain rate regime, whereas dynamic recovery was a dominant deformation mechanism in the low temperature-high strain rate regime. It was found that dynamic strain aging in the high temperature deformation was governed by the mechcanism of diffusion-controlled, viscous dislocation movement.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.660-665
• /
• 2003

The true stress - true strain relation of SA508 steel was evaluated with analytical and experimental equation on the base of the indentation load-depth curve obtained from the modeling of ball indentation test. The evaluated relation between true stress and true strain is agreed well with that of SA508 teel defined in the modeling. The distribution of effective stress along the center axis of indentation depth was calculated with Tresca criteria in the modeling. The representative strain, which are defined in this study as the corresponding strains obtained from the maximum effective stress, have a linear relation with the true strain. The true stress - true strain relation of austenitic stainless steel was evaluated by the modeling of ball indentation test to verify the case of A508 steel.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.933-936
• /
• 2008

모르타르에 2 %이내의 합성섬유를 혼입함으로써 콘크리트의 수십, 수백 배에 달하는 인장변형률 경화거동을 보이는 ECC가 기존 연구에 의해 개발되었으며, ECC를 구조부재에 사용할 경우, 구조물의 성능개선이 매우 커질 것으로 판단된다. 그러나 ECC를 사용한 구조물을 설계할 때 중요한 요인인 ECC의 인장거동 관계 예측에 대해서는 많은 연구가 이루어지지 않았으며, 특히 보다 실제적인 인장거동 관계를 예측하기 위해서는 섬유분산성 등 실제의 균열면응력-변위 곡선을 고려한 연구가 필요하다. 따라서, 이 연구에서는 ECC의 인장거동 관계를 예측할 수 있는 기법을 제시하였다. ECC의 인장거동 예측방법은 초기균열강도, 인장강도, 인장변형률을 구하는 과정으로 구성되는데, 보다 합리적이고 실제적인 ECC의 인장거동 예측을 위하여 균열면응력에서 가교작용에 기여하는 유효섬유의 개수를 섬유의 기울어진 각도와 섬유사이의 간격에 따라 예측하였다. 또한 극한인장변형률 예측을 위하여 화상처리기법을 사용하였다. ECC의 인장실험결과와의 비교를 통하여 예측방법의 타당성을 평가하였다.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1685-1696
• /
• 2001

A novel indentation theory is proposed by examining the data from the incremental plasticity theory based finite element analyses. First the optimal data acquisition location is selected, where the strain gradient is the least and the effect of friction is negligible. This data acquisition point increases the strain range by a factor of five. Numerical regressions of obtained data exhibit that strain hardening exponent and yield strain are the two main parameters which govern the subindenter deformation characteristics. The new indentation theory successfully provides the stress-strain curve with an average error less than 5%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.185-192
• /
• 2000

A novel indentation theory is proposed by examining the data from the incremental plasticity theory based finite element analyses. First the optimal data acquisition location is selected, where the strain gradient is the least and the effect of friction is negligible. This data acquisition point increases the strain range by a factor of five. Numerical regressions of obtained data exhibit that strain hardening exponent and yield strain are the two main parameters which govern the subindenter deformation characteristics. The new indentation theory successfully provides the stress-strain curve with an average error less than 3%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.132-137
• /
• 2004

In this work, effects of hyper-elastic rubber material properties on the indentation load-deflection curve and subindenter deformation are first examined via [mite element (FE) analyses. An optimal data acquisition spot is selected, which features maximum strain energy density and negligible frictional effect. We then contrive two normalized functions. which map an indentation load vs. deflection curve into a strain energy density vs. first invariant curve. From the strain energy density vs. first invariant curve, we can extract the rubber material properties. This new spherical indentation approach produces the rubber material properties in a manner more effective than the common uniaxial tensile/compression tests. The indentation approach successfully measures the rubber material properties and the corresponding nominal stress.strain curve with an average error less than 3%.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.76-79
• /
• 2000

Polymeric composites exhibit highly nonlinear and rate dependent behavior during loading and unloading in off-axis directions. The equilibrium state of stress during loading is lower than the state of stress produced at finite strain rates. The amount of stress relaxation during loading decreases. Interestingly, however, the stress goes up to reach to the equilibrium state of stress for a fixed displacement during unloading. The unloading behavior is quite similar to the loading behavior. The stress relaxation patterns during loading and unloading is also similar, and those depend on the fiber orientation angles and the loading and unloading rates. The AS4/PEEK thermoplastic composite is used to characterize the relaxation behavior for different off-axis angles and loading rates. There exists a transient loading region at the beginning of unloading. The effective stress and effective plastic strain concept is used to establish a master curve of stress recovery pattern for different off-axis angles and unloading rates.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.33-36
• /
• 2000

The dynamic recrystallization (DRX) of medium carbon steels (SCM 440 and POSMA45) was studied with torsion test in the temperature range of $900-1100^{\circ}C$ and the strain rate range of $5.0x10^{-2}\;-\;5.0x10^0/sec$. To establish the quantitative equations for DRX, the evolution of flow stress curve with strain was analyzed. The critical strain (${\varepsilon}_c$) and strain for maximum softening rate ( ${\varepsilon}^{*}$) could be confirmed by the analysis of work hardening rate ($d{\sigma}/d{\varepsilon}\;=\; \theta$). The volume fraction of dynamic recrystallization ($X_{DRX}$) as a function of processing variables, such as strain rate ( $\dot{\varepsilon}$ ), temperature (T), and strain ( $\varepsilon$ ) were established using the ${\varepsilon}_c$ and ${\varepsilon}^{*}$. For the exact prediction, the ${\varepsilon}_c$, ${\varepsilon}^{*}$ and Avrami' exponent (m') were quantitatively expressed by dimensionless parameter, Z/A respectively. The transformation-effective strain-temperature curve for DRX could be composed. It was found that the calculated results were agreed with the experimental data for the steels at any deformation conditions.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.541-548
• /
• 2009

지금까지 ECC의 인장거동 예측에 대한 이론적인 연구는 균열면에서 섬유가 균일하게 분산되어 있다고 가정하고 섬유 가교 곡선을 유도하는 방법으로 수행되었으며, 섬유의 기울어진 각도와 섬유사이의 간격은 섬유 가교 곡선을 예측하는데 큰 영향을 준다. 그러나 이론적으로 유도된 방법은 섬유의 기울어진 각도와 섬유 간격에 따라서 섬유가교 곡선의 형태가 달라지는 것을 모사하지 못하여 실제 섬유 가교 곡선과 차이를 보이며, ECC 인장거동을 예측할 때 큰 오차가 발생할 수 있다. 이 연구에서는 이러한 문제점을 해결하기 위하여 균열면에서 섬유 가교 작용에 기여하는 유효 섬유의 개수를 섬유의 기울어진 각도와 섬유 간격에 따라 고려한 후, 수정된 섬유 가교 곡선을 구하고, 이를 이용하여 보다 합리적인 ECC의 인장거동 예측기법을 제시하였다. 또한, 인장거동 예측에 중요한 변수인 초기 균열 강도, 섬유 가교 곡선에서의 최고 응력과 변위, 인장변형률, 균열간격을 구하기 위한 방법과 절차를 제시하였다. 그리고 예측 방법의 타당성을 평가하기 위하여 수정된 섬유 가교 곡선과 이론적인 섬유 가교 곡선으로 구한 ECC의 인장거동을 실험 결과와 비교하였다. 수정된 섬유 가교 곡선을 사용할 경우, 실험 결과와 잘 일치함을 알 수 있었으며, ECC의 인장거동을 합리적으로 예측할 수 있을 것으로 판단된다.