• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.145-151
• /
• 2007

섬유에 의하여 보강된 철근콘크리트 보는 철근만에 의하여 보강된 보와 다른 파괴 모드를 나타낸다. 섬유 보강 보는 섬유의 양, 내부 전단 보강 철근의 양 및 콘크리트의 압축강도에 따라서 전단 보강 철근이 항복하고 콘크리트가 압축 파괴하는 경우(섬유는 탄성 상태)와 콘크리트가 압축파괴하기 이전에 섬유가 파단하는 경우로 구별할 수 있다. 대부부의 섬유 보강 철근콘크리트 보는 전자의 파괴 모드를 나타내며 이 경우에 전단파괴 시의 섬유의 유효변형률을 정확하게 예측하여야 한다. 이 연구에서는 11개의 섬유 보강 철근콘크리트 보 실험을 통하여 섬유의 유효변형률을 측정하였다 실험의 주요 변수는 섬유의 양, 섬유의 종류(탄소 섬유, 유리 섬유), 부착 형상 (전단면 감싸기, 스트립형 부착)이었다. 실험에 의하여 측정된 섬유의 유효변형률은 제안된 유효변형률 예측법과 비교되었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권1호
• /
• pp.40-46
• /
• 2005

Clostridium bifermentans strain DPH-1 has already been found to dechlorinate perchloroethylene (PCE) to cis-dichloroethylene (cis-DCE) via trichloroethylene (TCE). In this study, our investigation on different culture conditions of this DPH-1 strain was extended to find a more efficient and cost effective growth medium composition for this DPH-1 strain in bioremediation practices. Temperature dependency of strain DPH-1 showed that the growth starting time and PCE degradation at $15^{\circ}C$ was very slow compared to that of $30^{\circ}C$, but complete PCE degradation occurred in both cases. For the proper utilization of strain DPH-1 in more cost effective bioremediation practices, a simpler composition of an effective media was studied. One component of the culture medium, yeast extract, had been substituted by molasses, which served as a good source of electron donor. The DPH-1 strain in the medium containing molasses, in the presence of $K_{2}HPO_4\;and\;KH_{2}PO_4$, showed identical bacterial multiplication (0.135 mg protein $mL^{-1}h^{-1}$) and PCE degradation rates ($0.38\;{\mu}M/h$) to those of the yeast extract containing medium.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.102.2-103
• /
• 2003

This studies were investigated the occurrence of Sclerotinia rot by Sclerotinia Sclerotiorum at the lettuce field in Uiryeong-Gun, Gyeongsangnam-Do and were isolated the most effective microorganism for the biological control to the pathogen, S. sclerotiorum YR-1 strain from diseased soil and lettuce leaves. For the pathogenicity test, the most suitable inoculmn density of YR-1 strain was selected as the mycelial suspension of 40m1 showing disease incidence of 80％, and the symptom showed as same as at the fields, the leaves and stem had rotten and developed white downy mycelial at the diseased lesion on the leaves and stems, and produced black and irregular sclerotinia. On the PDA dual test, about 300 isolates were examined the antifungal activity to the pathogen, YR-1 strain, and among them, A-2, A-7, and RH-4 strain were selected most effective antagonistic bacteria. At pots test, the control value of A-7 strain showed the highest value as 85％ which was more effective than that of others in a growth chamber. For the promotion of control effect, the selected 3 isolates were spayed on the lettuce leaves as a sole and/or mixed treatments in a growth chamber, the mixed treatment of A-7 and RH-4 strain showing the control value of 90％ was most effective than that of sole treatment with A-7 or RH-4 strain showing the control value of 80％, respectively and mixed treatment with A-2 and A-7 strain and A-2, A-7 and RH-4 strain. In addition, 3 bacteria re-isolated from diseased soils, and all of the selected 6 isolates investigated the control effect at pots in a growth chamber, According to the results, A-7 and Pro-EB 15 strain showed the control value of 91.0％ and 90.1％ respectively, and they were selected most effectual antagonistic bacteria to control lettuce sclerotinia rot and identified as the Bacillus mojanuinensis by 16s RNA analysis. This is the first report on the biological control using by B. mojanvinensis to the lettuce Sclerotinia rot.

• The Plant Pathology Journal
• /
• 제30권1호
• /
• pp.102-108
• /
• 2014

The bacterial strain T-9, which shows strong antifungal activity, is isolated from the soils of Samcheok, Gangwondo and identified as Paenibacillus kribbensis according to morphological and taxonomic characteristics and 16S rRNA gene sequence analysis. The P. kribbensis strain T-9 strongly inhibits the growth of various phytopathogenic fungi including Botrytis cinerea, Colletotricum acutatum, Fusarium oxysporum f. sp. radicis-lycopersici, Magnaporthe oryzae, Phytophthora capsici, Rhizoctonia solani, and Sclerotium cepivorum in vitro. Also, the P. kribbensis strain T-9 exhibited similar or better control effects to plant diseases than in fungicide treatment through in vivo assays. In the 2-year greenhouse experiments, P. kribbensis strain T-9 was highly effective against clubroot. In the 2-year field trials, the P. kribbensis strain T-9 was less effective than the fungicide, but reduced clubroot on Chinese cabbage when compared to the control. The above-described results indicate that the strain T-9 may have the potential as an antagonist to control various phytopathogenic fungi.

• 한국압력기기공학회 논문집
• /
• 제17권1호
• /
• pp.1-7
• /
• 2021

This paper presents sensitivity analysis results of strain on notches under cycling loading to 2-D finite element density considering plasticity. Cylindrical notched specimens having some stress concentrations were modeled with 2-D axisymmetrical finite element having various finite element densities. Elasto-plastic finite element analysis was performed for the various finite element models subjected to cycling loading considering plasticity. The finite element analysis results were compared to investigate sensitivity of the finite element analysis variables such as von-Mises effective stress, accumulated equivalent plastic strain, and equivalent plastic strain to 2-D finite element density. As a result of the comparison, it was found that the accumulated equivalent plastic strain is more sensitive than the others whereas the von-Mises effective stress is much less sensitive.

• 소성∙가공
• /
• 제5권4호
• /
• pp.327-336
• /
• 1996

The effect of dynamic strain aging on high temperature deformation behaviour of the A-Mg alloy was investigated by strain rate change tests and stress relaxation tests between 20$0^{\circ}C$and 50$0^{\circ}C$. Yield point, short stress transient and periodic discontinuities on the stress-strain curve were considered as an evidence of the effect of dynamic strain aging. With this criterion two distinct strain rate-temperature regimes could be manifested. Dynamic strain aging was considered to be effective in the high temperature-low strain rate regime, whereas dynamic recovery was a dominant deformation mechanism in the low temperature-high strain rate regime. It was found that dynamic strain aging in the high temperature deformation was governed by the mechcanism of diffusion-controlled, viscous dislocation movement.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.285-286
• /
• 2013

이번 연구에서는 제일원리 계산을 통해 실리콘의 전자구조를 분석하였다. 특히 strain이 걸렸을 때에 실리콘의 전자이동도는 전자구조의 변화와 밀접하게 관련이 있음을 밝혔다. Strain이 걸린 경우와 그렇지 않은 경우에 대한 conduction band의 effective한 유효질량 계산을 하였고 이를 통해 tensile strain이 걸린 경우 전자의 이동도가 증가하는 것을 보였다.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.45-51
• /
• 1997

For semi-solid forging, it is necessarily required to prepare a workpiece with globular microstructure. Among several processes to obtain golbular microstructure, SIMA process is very simple and advantageous with respect to equipment. This paper presents the influence of effective strain on the globularization with aluminium 2024 alloy in cold working stage by SIMA process. Upsetting and forward extrusion are tested for cold working and induction heating is also carried out for reheating to obtain golbular microstructure. Microstructure is observed with an optical microscope. And finite element simulations to obtain effective strain in cold working stage are performed by using commercial finite element code, DEFORM.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1249-1255
• /
• 2009

Cord-rubber composites widely used in tires show very complicated mechanical behavior such as nonlinearity and large deformation. Three-phase(cord, rubber and the interface) modeling has been used to analyze the stress distribution in the cord-rubber composites more accurately. In this study, finite element methods were performed using two-dimensional generalized plane strain element and plane strain element to investigate the stress distribution and effective modulus of cord-rubber composites. Neo Hookean model was used for rubber property and several interface properties were assumed for various loading directions. It was found that the interface properties affect the effective modulus and the distributions of shear stress.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.100-123
• /
• 1995

The relationship between plastic deformation and crystal grain change in warm forging processes of SM100 carbon steel is studied. If the carbon steel is deformed in warm forging temperature (about recrystallization range), the crystal grain and cementite of the internal part are changed, so material properties are changed. Some experimental values, such as the elliptic degree of cementite, the grain size of cementitie and ferrite grain size, are investigated. When the plastic deformation proceeds, the elliptic degree of cementite becomes large, the grain size of cementite particle is small, and the size of ferrite grain appears fine by recrystallization. The elliptic degree of cementite has a considerable effect on formability. The distribution of effective strain in the forging is calculated by the rigid visco-plastic FEM analysis. The effective strain distribution obtained from the FEM simulation is compared with the experimental result. At effective strain 0.3 dynamic recovery and dynamic recrystallization begin, over 2.5 the organization of material has better quality that is suitable for the following cold forming.