• 대한원격탐사학회지
• /
• 제11권3호
• /
• pp.117-127
• /
• 1995

본 논문에서는 지표면의 유효 토양 수분함유량의 적정한 값을 추출하는 몇가지 방법을 소개하고 그 방법들을 서로 비교하였다. 지표면의 꼭대기 층은 비교적 말라 있고, 밑바닥 층은 젖 어 있어서 종단면으로 봤을 때 토양은 대개 균일하지 않은 수분함유량 분포를 갖는다. 이러한 비 균일적인 토양의 수분함유량을 봤을 때 토양은 대개 균일하지 않은 수분함유량 분포를 갖는다. 이러한 비균일적인 토양의 수분함유량을 어떤 평균적인 값으로 나타낸 것이 유효 수분함유량이 다. 이 유효 수분함유량을 구하는 간단한 방법 중의 하나는 층층이 측정한 수분함유량의 산술 평 균을 취하는 것이다. 다른 방법으로는 균일한 지표면과 비균일한 지표면의 침투 두께를 각각 계 산하고 비교하여 유효 수분함유량을 얻는 방법이 있다. 또 다른 방법은 균일 지표면과 비균일 지 표면에서 각각 반사율을 계산하고 비교하여 유효 수분함유량을 구한다. 이러한 방법들이 서로 비 교되었고, 특히 반사율 적용법이 좀 더 자세하게 연구되었는데 그 이유는 실제 레이다 산란은 전 파의 침투보다는 반사에 의해 좌우되기 때문이다.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.57-64
• /
• 2016

Purpose: Recently, lighting energy consumption in buildings has been gradually increasing and more studies are being carried out in order to solve this problem. Especially, the efficiency of the light-shelf system, which is a natural lighting system, has been recognized as a potential solution in addressing this problem and so various studies regarding the light-shelf system are being conducted. However, if high luminance material is used for the light-shelf system, glaring may occur in certain circumstances even though such material increases efficiency, and there are also difficulties related to maintenance and management in the case of an external light-shelf system. Therefore, the purpose of this study is to suggest modifications in relation to the reflectivity of the light-shelf system and introduce a rolling type light-shelf system with built-in cleaning equipment. In addition, a performance evaluation technique was established to verify its effectiveness. Method: In this study, we reviewed previous studies related to the light-shelf system and its performance. Then a testbed was established to assess the performance of the rolling-type light-shelf system suggested in this study. Also, the performance of the rolling-type light-shelf system suggested in this study was compared and analyzed with that of existent light-shelf systems in order to better verify the performance, and the uniformity ratio of illumination and lighting energy consumption were calculated for this purpose. Result: The results of the performance evaluation are as follows. 1) The performance evaluation result of the light-shelf system on the day of the summer solstice shows that $30^{\circ}$ is appropriate for the angle of light-shelf system, and the depth of the incoming natural light also increases as the angle of the light shelf increases. 2) It is possible to improve the uniformity ratio of illumination by increasing the reflectivity of the light shelf, and the reason for this is the increase in the amount of incoming light entering indoors due to the increased reflectivity of the light shelf. 3) The rolling type light-shelf system suggested in this study enables energy saving in comparison with existent light-shelf systems, and when the external illuminance decreases to 60,000 lx and 40,000 lx during the summer solstice due to factors such as the weather, the suggested light-shelf system can save energy by 12.1% and 5.1% respectively. Thus the light-shelf system proposed in this study is deemed to be effective in reducing energy costs.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.1-5
• /
• 2014

Since the "Light Pollution Prevention Act" was executed, the installation of the light cutoff panel to the security lightings which caused light trespass has been increased in the local government. The light cutoff panel is effective in reducing the light trespass in term of the cost-benefit. Because the installation of the light cutoff panel is inexpensive than the change of the security lighting. But the reflected light from the surface of the light cutoff panel has been regarded as another light pollution problem to solve. Therefore, we try to improve light cutoff panel by changing the light reflectivity characteristic of the surface of the light cutoff panel. First, we laminated the surface of light cutoff panel by black powder to reduce the light reflectivity of the light cutoff panel. After the black powder lamination, the light reflectivity on the light cutoff panel improved from 85% to 5%. And we compared reflected light caused by black powder laminated light cutoff panel with the one of no surface treatment cutoff panel. The vertical illuminance was measured at 3, 6, 9m in front of the security lighting and 3, 6, 9, 12, 15, 18m in back of the security lighting to evaluate the reflected light. And the measurement height was determined of 1.5m considering the height of the 1th floor of an apartment house. In this study, we found that the reflected light from the light cutoff panel can be reduced about 90% by the black powder lamination method. The results derived from this study will be helpful to develope the various kind of light cutoff panel which minimize the adverse effect like reflected light of light cutoff panel.

• ALGAE
• /
• 제23권1호
• /
• pp.83-90
• /
• 2008

Eelgrass beds are very productive and provide nursery functions for a variety of fish and shellfish species. Management for the conservation of eelgrass beds along the Korean coasts is critical, and requires comprehensive strategies such as vegetation mapping. We suggest a mapping method to spatial distribution and quantify of eelgrass beds using a digital echosounder. Echosounding data were collected from the northeast part of Kwangyang Bay, on the south of Korea, in March, 2007. A transducer was attached to a boat equipped with a DGPS. The boat completed a transect survey scanning whole eelgrass beds of 11.7 km2 with a speed of 1.5-2 m s-1 (3-4 knot). The acoustic reflectivity of eelgrass allowed for detection and explicit measurements of canopy cover and height. The results showed that eelgrass bed was distributed in depth from 1.19 to 3.6 m (below MSL) and total dry weight biomass of 4.1 ton with a vegetation area of 4.05 km2. This technique was found to be an effective way to undertake the patch size and biomass of eelgrass over large areas as nondestructive sampling.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.49-54
• /
• 2017

Purpose: Temperature in urban areas increase much more than suburban areas and it is called urban heat island (UHI) phenomenon. There are several solutions to control UHI phenomenon such as green roof system, water space construction, and cool roof system. However, application of green roof system and cool roof system to some of the buildings which compose the city has a critical limit. Therefore, in order to diminish the temperature rising and UHI phenomenon due to climate change of the city, it needs to approach from the viewpoint of site or city, rather than the viewpoint of individual buildings. This study is aims at analyzing UHI phenomenon by characteristics of surface materials and suggesting the solutions to reduce UHI phenomenon by types of complex. Method: Literature reviews were conducted to analyze the cause, mitigating plan, and recent trends of UHI phenomenon. For the simulation analysis, the type of complex was classified 3 representative complex. Based on measured reflectivity, simulation about UHI phenomenon was conducted by setting 4 strategies; albedo of roof, road pavement, green roof system, and vegetating around buildings. Result: As the results of simulating the UHI reduction factor by types of complex, it showed that the effect of temperature reduction on the building roof layer is more effective than adjusting the reflectivity of buildings such as green roof system, planting near the buildings in both the detached house complex, apartment complex, and commercial complex.

• Journal of the Optical Society of Korea
• /
• 제9권3호
• /
• pp.123-128
• /
• 2005

An electrically controllable fiber Bragg grating inscribed in a hydrogen-loaded standard single-mode fiber with liquid-crystal cladding is presented. Control of the optic axis of liquid crystals by means of external electric fields results in the change of reflectivity and Bragg wavelength of the grating. The increase of surrounding refractive index of a fiber makes effective refractive index of a propagation mode higher, which results in high field confinement and longer Bragg wavelength. The reduction of the fiber diameter by chemical etching process improves the long-range ordering of liquid-crystal molecules and reduces controlling voltage. The tunable ranges of reflectivity and Bragg wavelength of the liquid crystal-cladding fiber Bragg grating were $\~4.6dB\;and\;\~0.3nm$, respectively.

• 한국수자원학회논문집
• /
• 제42권8호
• /
• pp.659-671
• /
• 2009

본 연구에서는 레이더 강우량 자료의 편차보정에 사용되는 G/R비의 정확도를 향상시키기 위하여 fuzzy c-means 방법을 사용한 자료의 군집화를 적용하였다. 대상 레이더자료는 광덕산 레이더기지의 자료로서 유효범위 100km이내의 자료를 대상으로 지상관측망인 기상청의 AWS(Automatic Weather System) 지점에서 관측한 자료와의 비교를 통하여 G/R비를 구하였다. G/R비를 구하는데 있어서 전체 유효범위를 대상으로 동일한 방법을 사용한 경우와 레이더 자료의 군집화를 통해서 지형적인 효과를 고려한 경우를 비교하였으며, AWS 실측강우량과 G/R비를 통한 레이더 강우량 자료의 비교를 위하여 절대상대오차와 평균제곱근오차 등을 비교분석하였다. 그 결과 전체유효범위를 대상으로 동일하게 G/R비를 적용하여 구한 레이더 강우량에 비하여 군집분석을 이용하여 지형효과를 고려한 G/R비를 적용한 레이더 강우량의 오차가 더 적게 나타났다.

• 한국콘텐츠학회논문지
• /
• 제1권1호
• /
• pp.24-31
• /
• 2001

AV시스템에서, 스테레오 스피커간의 거리가 좁기 때문에 실감나는 사운드효과를 내기가 매우 어렵다. 지금까지 공간적으로 음상을 확장시키는 신호처리방법이 많이 연구되었다. 음상을 화장하는 전형적인 방법은 대부분 위상이동과 관련된다. 그러나 이 방법은 반사성이 놓은 콘크리트 벽 구조에서는 효과적이지 못하다. 본 논문에서는 선착효과와 반사음을 이용하여 스테레오 음상을 효과적으로 확장하는 방법을 제안하였다. 실험을 통하여 기존 AV시스템이 스테레오 음상을 확장하는 방법이 실내가 넓을수록 유용함을 확인하였다.

• 한국광학회지
• /
• 제21권2호
• /
• pp.74-81
• /
• 2010

WDM-PON 용 저가형 광원으로 유망한 주입 잠금 패브리-페롯 레이저 다이오드의 특성 해석을 위한 모델링 방법을 제시하였다. 해석 방법으로는 시영역 대신호 모델을 이용하였으며, 계산 결과는 기존의 실험 결과와 유사한 경향을 보임을 확인하였다. 이를 토대로 특정한 파라미터를 가지는 레이저 다이오드 구조에서의 단면 반사율에 따른 동작 특성과 디튜닝, 아이 다이어그램등을 모델링 하였다. 특히 단면 반사율의 값에 따른 부모드 억제율 특성 및 디튜닝의 영향을 살펴보았으며, 주입되는 단면의 반사율이 1% 미만으로 유지되어야 안정된 특성을 얻을 수 있음을 확인하였다. 아이 다이어그램의 경우 155 Mbps 급에서는 손쉽게 아이 열림을 얻을 수 있지만, 1.25 Gbps 급에서는 레이저 다이오드의 활성층 두께 등의 파라미터를 적정화해야 적정한 아이특성을 얻을 수 있음을 보였다.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.79-87
• /
• 1998

Morphological analysis of wear particles in the lubricating oil is a very effective and versatile means of lubricant analysis for machine condition monitoring and fault diagnosis. The prospects for determining quantitative information about wear particle morphology have been considerably enhanced by recent developments reported in the application of image processing and analysis techniques. This study was undertaken to investigate the influence of oiliness agent and extreme pressure agent on the shape of wear particles. The wear test was performed under different experimental conditions with stearic acid, dibenzyl disulfide(DBDS) and tricresol phosphate(TCP) in paraffinic base oil. Wear particles characteristics were described using four shape parameters, namely 50% volumetric diameter, aspect, roundness and reflectivity. The results showed that the four shape parameters of wear particles depend on a kind of the additives. This analysis of wear debris with computer image processing techniques is sufficient to distinguish some types of wear debris. The wear volume of three kinds of the specimens are affected by the additives with boundary films.