• Asian-Australasian Journal of Animal Sciences
• /
• 제32권8_spc호
• /
• pp.1266-1274
• /
• 2019

This paper presents a review of dairy goat production in sub-Saharan Africa (SSA) from 2010- 2017, its current state, constraints and prospects for research and development. Since the introduction of dairy goats in SSA in pre-colonial times, their populations have continued to increase due to declining land size as a result of land fragmentation and increasing demand for goat milk. The current goat population in SSA is 372,716,040 head of which only 15.98% used for milk production. Populations in the Eastern and Western regions of SSA have shown an increasing trend from 2010 to 2017. The Southern Africa goat population is on the decline at an annual rate of about 1.77% whereas Central Africa has had a constant goat population within the same period. Eastern Africa reported the highest increase in the population of goats used for milk production. Milk production was highest in Eastern Africa and lowest in Southern Africa. However, dairy goat productivity remained constant in the Eastern region throughout the review period. Dairy goats are mainly raised under smallholder mixed crop-livestock systems. To enhance the development of the dairy goat, concerted efforts should be made to alleviate the constraints that stifle its growth. These constraints can be categorized into nutrition and feeding, breeding and reproduction, diseases, parasites, climate change, and underdeveloped dairy goat products market. Effective management of dairy goats requires a holistic approach and there is the need to expand the markets by further sensitization on the nutritional and medicinal advantages of dairy goat products. In order to achieve rapid development in the dairy goat sub sector, research and development initiatives should be directed towards alleviating the hurdles in nutrition and feeding, breeding, animal health and resilience as well as dairy goat markets.

• Journal of Forest and Environmental Science
• /
• 제38권2호
• /
• pp.102-109
• /
• 2022

This study was conducted to test the significant difference of fertility variation among families and to select superior families for acorn production in the breeding seedling seed orchards (BSSOs) of Quercus acuta and Quercus glauca. The seed orchards were located in Jeju island and established by seedlings raised from selected parents for genetic testing in 2006. In the spring of 2021, the numbers of female and male flower were counted from 5 to 10 individuals per family in the BSSOs. To test statistical significance of which parameter is not satisfied through the normality test, we used a nonparametric analysis. Correlation analysis was performed to quantify the association between female and male flower production. As the results, the significant difference of flower production among families was found in both seed orchards. The averages of female flower production were 65.3 and 181.9 in Q. acuta and Q. glauca. The positive Spearman's rank correlation was existed between male and female flower production. Broad-sense heritability on female and male flower production were 0.191 and 0.147 in Q. acuta, and 0.285 and 0.068 in Q. glauca, respectively. Sexual asymmetry (e.g., maleness index) between female and male, and contribution variation among families (e.g., parental balance) were analyzed to find reasonable alternatives in the management of seed orchards. Effective population size of seed crops was predicted as a concept of status number. Loss of gene diversity (accumulation of group coancestry) would not be alarming in the BSSOs. Our results would be helpful to select breeding materials for establishing new seed orchards and to supply genetically improved seeds of evergreen oaks, which is one of the backbones of the strategy of carbon sink in the 2050 Carbon Neutrality of Korea Forest Service.

• IMMUNE NETWORK
• /
• 제4권1호
• /
• pp.38-43
• /
• 2004

Backgroud: Immunotherapy using dendritic cells (DC) loaded with tumor antigens may represent a potentially effective method for inducing antitumor immunity. We evaluated the effectiveness of DC-based antitumor immune response in various conditions. Methods: DC were cultured from peripheral blood mononuclear cells (PBMNC) in myelogenous leukemia (ML) and lysates of autologous leukemic cells are used as tumor antigen. The effectiveness of interleukin-12 (IL-12) and CD40L (CD154) on the antigen presenting function of lysates-loaded DC was analyzed by proliferation, cytokine production, and cytotoxicity tests with activated PBMNC (mainly lymphocytes). For generating antigen-loaded DC, direct fusion of DC with ML was studied. Results: Antigen loaded DC induced significantly effective antitumor immune response against autologous leukemic cells. Administration of IL-12 on the DC based antitumor immune response showed higher proliferation activity, IFN-$\gamma$ production, and cytotoxic activity of PBMNC. Also, fused cell has a potent antitumor immune response. Conclusion: We conclude that lysates-loaded DC with IL-12 may be effectively utilized as inducer of antitumor immune reaction in ML and in vivo application with DC-based antitumor immunotherapy or tumor vaccination seems to be feasible.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권4호
• /
• pp.514-520
• /
• 2006

An abandoned mandarin orange orchard in southwestern Japan was set-stocked by Japanese Black cows at two stocking rates (1.0 and 2.0 animals/ha), and vegetation dynamics and diet selection by cattle were monitored for two years, in an effort to obtain information on effective use of abandoned agricultural fields for low-cost animal production and environmental conservation. Two dominant species at the commencement of grazing, kudzu (Pueraria lobata Ohwi) and tall goldenrod (Solidago altissima L.), showed different responses to grazing during the two years; the composition of kudzu decreased, contrasting with that of tall goldenrod which increased at both stocking rates. This was caused by high preference for kudzu and avoidance or low preference for tall goldenrod by cattle. Retrogression of vegetation due to cattle disturbances occurred at both stocking rates, with the high stocking rate leading to a lower degree of succession than the low stocking rate. It was shown that cattle grazing, particularly at a high stocking rate, was effective in the management of vegetation of an abandoned orchard.

• Journal of Biosystems Engineering
• /
• 제24권6호
• /
• pp.487-492
• /
• 1999

One of effective utilization method of rice husk is to utilize it as culture material by carbonizing the rice husk. As a second part of a series to investigate the effective and continuous production of carbonized rice husk by a cyclone combustor, a non-slagging vertical cyclone combustor without vortex collector pocket was introduced. Isothermal and mixed firing with LPG and rice husk were undertaken in order to characterize the system. Inert rice husk was used during the isothermal test to find mass of rice husk collected. It was impossible to ignite rice husk itself over the experimental conditions considered in this experiment. Cyclone combustor was operated at temperatures of 1,273~1,473K. Detailed combustion data were obtained from a pilot unit with the air flow rate of 70m$^3$/h and rice husk feed of 2kg. The equivalence ratio ranged from 0.66 to 3.48. The auxiliary gas flow rate was varied from 3.22 to 12.86$\ell$/min. The weight reduction, pH and particle size distribution of carbonized rice husk were measured to evaluate the quality of carbonized rice husk. An analysis of exhaust gas emission was conducted to characterize the combustor. The required carbonized rice husk could be obtained at equivalence ratio of 1.68~2.17, combustor temperature of 1,273~1,373K and auxiliary gas flow rate of 3.22~6.43$\ell$/min. A method to reduce CO emissions should be employed.

• BMB Reports
• /
• 제38권6호
• /
• pp.717-724
• /
• 2005

The nontoxic B subunit of cholera toxin (CTB) can significantly increase the ability of proteins to induce immunological tolerance after oral administration, when it was conjugated to various proteins. Recombinant CTB offers great potential for treatment of autoimmune disease. Here we firstly investigated the feasibility of silkworm baculovirus expression vector system for the cost-effective production of CTB under the control of a strong polyhedrin promoter. Higher expression was achieved via introducing the partial non-coding and coding sequences (ATAAAT and ATGCCGAAT) of polyhedrin to the 5' end of the native CTB gene, with the maximal accumulation being approximately 54.4 mg/L of hemolymph. The silkworm bioreactor produced this protein vaccine as the glycoslated pentameric form, which retained the GM1-ganglioside binding affinity and the native antigenicity of CTB. Further studies revealed that mixing with silkworm-derived CTB increases the tolerogenic potential of insulin. In the nonconjugated form, an insulin : CTB ratio of 100 : 1 was optimal for the prominent reduction in pancreatic islet inflammation. The data presented here demonstrate that the silkworm bioreactor is an ideal production and delivery system for an oral protein vaccine designed to develop immunological tolerance against autoimmune diabetes and CTB functions as an effective mucosal adjuvant for oral tolerance induction.

• 한국콘텐츠학회논문지
• /
• 제7권4호
• /
• pp.133-140
• /
• 2007

기존의 상업적인 3D CG 애니메이션 제작 공정 구조는 부서간의 병목현상으로 모든 부서가 동시에 작업을 할 수 있는 효율적인 구조로 이루어지지 않고 있다. 예를 들어, 애니메이팅 작업을 하기 위해선 선행되어야 할 모델링과 Set-Up 단계가 끝나기 전에는 애니메이팅 작업을 할 수가 없다. 그 결과, 제작 일정의 지연, 제작비의 손실을 발생시키게 되고, 또한 선행된 작업에 수정을 가할 경우 수정이 끝날 때 까지 애니메이팅 작업은 중단된다는 결과를 야기 시킨다. 이런 문제는 표준으로 정해 놓은 "마스터 캐릭터"의 적용으로 도움을 줄 수가 있는데, 프로젝트의 시작과 동시에 모델링과 set-up 그리고 다른 어떤 작업과도 독립적으로 애니메이팅 작업을 시작 할 수 있고 수정 작업도 독립적으로 수행이 가능해서 애니메이션 제작공정을 효율적으로 관리할 수 있다.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2935-2944
• /
• 2009

중소 PCB 제조업체에서는 외부 생산 환경 변화, 복수개의 제약공정, 많은 공정수, 긴 리드타임, 동일공정 반복생산 등의 특징으로 인하여 효과적인 생산 스케쥴 작성에 많은 어려움을 겪고 있다. 최근 TOC 이론에서 제시하고 있는 DBR기법을 PCB 생산라인에 적용하고자 하는 시도는 진행되고 있으나, 제약공정을 1개만 설정하도록 하는 일반적인 DBR로서는 PCB 생산라인의 특성상 충분한 효과를 기대할 수 없는 현실이다. 따라서 본 논문에서는 PCB 생산라인에서 효과적인 생산스케줄링을 수립하기 위하여 TOC의 DBR기법을 발전시킨 복수 DBR기법을 제시하였다. 또, 실제로 국내 중소 PCB 제조업체에 복수 DBR을 적용하여 제조 리드타임을 20%이상 단축함을 확인하였다.

• Mycobiology
• /
• 제43권1호
• /
• pp.63-70
• /
• 2015

Phytophthora diseases have become a major impediment in the citrus production in Thailand. In this study, an isolate of Phytophthora denominated as PHY02 was proven to be causal pathogen of root rot of Pomelo (Citrus maxima) in Thailand. The isolate PHY02 was morphologically characterized and identified as Phytophthora palmivora based on molecular analysis of an internal transcribed spacer rDNA sequence. This work also presents in vitro evaluations of the capacities of Chaetomium spp. to control the P. palmivora PHY02. As antagonists, Chaetomium globosum CG05, Chaetomium cupreum CC3003, Chaetomium lucknowense CL01 inhibited 50~61% mycelial growth, degraded mycelia and reduced 92~99% sporangial production of P. palmivora PHY02 in bi-culture test after 30 days. Fungal metabolites from Chaetomium spp. were tested against PHY02. Results showed that, methanol extract of C. globosum CG05 expressed strongest inhibitory effects on mycelial growth and sporangium formation of P. palmivora PHY02 with effective dose ED50 values of $26.5{\mu}g/mL$ and $2.3{\mu}g/mL$, respectively. It is interesting that C. lucknowense is reported for the first time as an effective antagonist against a species of Phytophthora.

• 한국CDE학회논문집
• /
• 제16권3호
• /
• pp.187-196
• /
• 2011

Generally, BOM (Bill of Material) means a part list which is needed to manufacture or assemble a product or part. During manufacturing processes, BOM is inevitably required for most of enterprise processes such as design, procurement, production planning/control, resource planning, and financial works. Every manufacturing industry uses many kinds of BOM's that are adjusted to the requirement of functions of their work division. Moreover, BOM evolves in different forms according to the product development phases such as conceptual design; function design, detail design, and production design because it is necessary to use different product structures to keep product data generated throughout the lifecycle of a product. This includes all data and information related to the all the product development phases. Shipbuilding works also are processed and controlled based on BOM. However, effective maintenance of ship outfitting BOM data is getting difficult as the amount and complexity of data have increased due to variety and long lifecycle of ship. For the effective management of outfitting BOM data, two aspects must be considered. One is how to classify numerous BOMs type and the others how to display BOMs. So this study suggests a method to classify BOM types and propose two categories - Structure BOM, Display BOM. Base on this result, we propose the integrated ship outfitting BOMs model and analysis outfitting BOMs.