• Journal of Soil and Groundwater Environment
• /
• v.15 no.5
• /
• pp.40-45
• /
• 2010

In this study, methane production by reuse of screened soil of landfill was estimated and the effect of application of landfarming for the reduction of methane was investigated. The study soil sampled from S closed landfill contains VS 9.8~12.8% and its BOD/COD is 0.31~0.33 which is more than three times over 0.1, the BOD/COD stabilization criteria of Ministry of Environment. The effective remediation technology for the reduction of organics of soil, landfarming was applied to the screened soil for 60 days. VS and TPH removal showed 5.2~8.3% and 67~74% respectively, and the reduction of VS until 30 day charged 70% of the total reduction. BMP test showed 27.77~30.46 mL $CH_4$/g VS and total methane production from total screened soil for remediation is expected about 260.4 $CH_4$ ton. Expected amount of methane production of the screened soil by landfarming application is 12.9 $CH_4$ ton, which shows 95% gas reduction effect and landfarming is effective for the reduction of methane production from screened soil of landfill.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.4
• /
• pp.262-266
• /
• 1997

To increase the high production of 1-deoxynojirimycin (DNJ) from Streptomyces sp. SID9135, the effect of various carbon sources, nitrogen sources, cationic metal ions, the initial pH of the medium, and agitation speed were investigated. The most effective carbon and nitrogen sources were found to be lactose 2.5% (w/v) and soybean meal 2.0% (w/v), respectively. None of the cationic metal ions examined had any detectable stimulating effect on DNJ production except $Fe^{+2}$ ion. The initial optimum pH for DNJ production ranged from 6-8 and agitation speed was most effective at 400 rpm. In the jar fermentor experiments under optimal culture conditions, the accumulation of DNJ reached about $640{\mu}g$/ml after 5 days of cultivation and the level remained the same for a further two days.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.104-110
• /
• 2006

The 3D visualization of seafloor topography(ST) was realized to discuss the effective use by the 3D visualization of ST on the integrated navigation system(INS) for fishing boat. The software was to actually display the 3D visualization of ST using triangular irregular network, helical hyperspatial codes and stereo projection. The INS for fishing boat which applied the 3D visualization of ST will be utilized for safety voyage and the effective fishing work on the fishing ground.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.111-120
• /
• 2008

This paper purposes to suggest subjects integration method for effective cut-out animation production education activity. So we suggest concrete method to integrate subjects focusing on animation production. We gave cut-out animation production lessons to a group of students. As a result, their degrees of study accomplishment were higher than those of students under a general teaching style. And we conducted a questionnaire survey of participants, they gave an affirmative answer in understanding, satisfaction, participation, interest. With this, we confirmed that the animation production class activity with integrated subjects raised the creative learning ability.

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1606-1618
• /
• 2017

The explosion effect of computer graphics Visual Effects(VFX) used in films and animations is an important element that determines the completeness of the film, and its usage is getting extended. The realistic explosion effect of VFX should be made according to observations and analysis of various factors of actual explosion in real world. This experimental research would suggest the efficient production guideline for the technical characteristics of underwater explosion of VFX. For this research process, first, the comparison of actual explosion and VFX explosion effect, classification of actual explosion, and characteristics of underwater explosion effect will be addressed. Second, based on the literature reviews, the four steps of experimental production analysis tool will be derived. Third, the experimental research will be processed in along with technical factors four steps of the underwater explosion effect, (1)realistic creation and emission of fluid, (2)fluid expansion control by water pressure, (3)bubble effect, and (4)motion of bubble & dissipation of fluid. The effective method of fluid simulation production will be verified through experimental studies based on the characteristics of the actual explosion process. This experimental study suggested the VFX production technique is expected to be used as the basic data for related research field.

• Korean Journal of Pharmacognosy
• /
• v.47 no.1
• /
• pp.18-23
• /
• 2016

This study was conducted to investigate the tyrosinase inhibitory and melanin production inhibitory activity of the distilled water extract of Dendropanax morbifera leaf (DMW) and the fermented extract by Lactobacillus plantarum (DMF). DMF was prepared by inoculation of L. plantarum after the extraction procedure with distilled water. Fermentation for 48 hours at $37^{\circ}C$ is the most effective condition in this study. In DPPH radical scavenging ability, $SC_{50}$ values of the fermented DMF was $37.9{\mu}g/ml$ as a result of more effective than DMW extract ($52.6{\mu}g/ml$). Moreover, tyrosinase inhibitory activity of DMF showed higher activity than DMW. In nontoxic concentration range, DMF showed strong melanin production inhibitory effect in ${\alpha}$-melanocyte stimulating hormone-stimulated B16F10 cell. As a result, the fermentation of the distilled water extract of D. morbifera leaf by L. plantarum could be applicable to functional materials production for skin-whitening agents.

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.57-67
• /
• 2021

Photocatalytic green energy H2 production utilizing inexhaustible solar energy has been considered as a potential solution to problems of energy scarcity and environmental contamination. However, the design of a cost-effective photocatalyst using simple synthesis methodology is still a grand challenge. Herein, a low-cost transition metal, Cu-loaded one-dimensional TiO2 nanorods (Cu/TNR) were fabricated using an easy-to-use synthesis methodology for significant H2 production under simulated solar light. X-ray photoelectron spectral studies and electron microscopy measurements provide evidence to support the successful formation of the Cu/TNR catalyst under our experimental conditions. UV-vis DRS studies further demonstrate that introducing Cu on the surface of TNR substantially increases light absorption in the visible range. Notably, the Cu/TNR catalyst with optimum Cu content, achieved a remarkable H2 production with a yield of 39,239 µmol/g after 3 h of solar light illumination, representing 7.4- and 27.7-fold enhancements against TNR and commercial P25, respectively. The notably improved H2 evolution activity of the target Cu/TNR catalyst was primarily attributed to its excellent separation and efficiently hampered recombination of photoexcited electron-hole pairs. The Cu/TNR catalyst is, therefore, a potential candidate for photocatalytic green energy applications.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.106-110
• /
• 1998

Some successful scheduling systems are based on simulation technique. However, they are relatively expensive. A cost-effective solution is to apply general-purpose simulation software to the scheduling system. This paper is concerned with developing a simulation model for MPS(Master Production Schedule) evaluation system. The target system of the model is PC production system. AIM (Analyzer for Improving Manufacturing system), a well-known manufacturing oriented simulation software, is used for modeling tool. Eventually, the model can be included into an MPS evaluation system as simulation module and a scheduler can use the system to verify the MPS in advance.

• Clean Technology
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1996

Cleaner production is of substantial importance in changing the environmental approach within advanced industrialized countries. The critical principles involve fundamental understanding of diverse industrial processes, adherence to the earliest techniques of a hierarchy for reducing wastes, and utilization of an underlying thought process to achieve pollution prevention successes that are both technically feasible and cost-effective. Chemical engineering has played a major and unique role in this environmental field. Improving the sustainability of cleaner production will rest on including this subject in the curriculum of university engineering.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.13 no.1
• /
• pp.7-14
• /
• 1987

Production of shikonin derivatives through cell suspension culture of Lithospermum erythrorhizon was investigated. Optimal concentrations of IAA and kinetin on the growth of cell suspension were 0.2 and 0.1 ppm respectively. Pigment content was markedly increased when aluminum oxide was added to the production medium and its optimal concentration was 1.5g/70ml medium. The most effective concentration of IAA was 0.5 ppm and the production of pigment did not depend on the kinetin concentration.