• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2008

Super-resolution near-field structure (super-RENS) technology and solid immersion lens (SIL) based near-field (NF) technology have been expected as promising approaches to increase data capacity or areal density of optical disc. Super-RENS technology has been studied until now using mainly numerical aperture (NA) of 0.85 far-field optical system and possibility of tangential data density increment have been presented. NF technology has been studied with NA over 1 and presented demonstration of removable performance. To achieve much higher density, approach to increase NA of super-RENS by NF technology (Near-Field Super-Resolution, NFSR) can be a candidate and we think this technology would be advantageous compared to wavelength reduction or much higher NA increment of NF technology or much smaller effective optical spot size reduction of far-field super-resolution technology. In this paper we present readout result of ROM media having monotone pits using NF optical system with wavelength of 405nm and NA of 1.84 surface type SIL. GeSbTe material was used for super resolution active layer and pit length is 37.5nm which is shorter than resolution limit 55nm. We present the feasibility of NFSR technology by confirming the CNR threshold according to readout power (Pr) and CNR 33dB over threshold Pr.

• Korean Parent-Child Health Journal
• /
• v.5 no.2
• /
• pp.177-190
• /
• 2002

This study were conducted to assess the physical growth and developmental status of infants in orphanage in order to provide an empirical data. The subjects for this study were 104 infants and toddlers who were reared in an orphanage in D Metropolitan city. The instrument used for this study were anthropometric assessment and DDST for normative data of development. Data has been collected from September 1st, 1998 to August 31st, 2000 and were analyzed using SPSS/PC(Version 10.0) with frequency, mean, standard deviation, ANOVA and Chi-square test. The results of this study were as follows; 1. 30.8% of infants in orphanage had abnormal weight, 26.9% had abnormal length, and 22.1% had abnormal head circumference and most of them were distributed below 50 percentile of growth chart. 2. 53.8% of infants in orphanage had normal, 27.9% had qustionable, and 18.3% had abnormal developmental screening test results, especially, 31.5% of infants in orphanage ages 3 to 5 years had abnormal developmental screening test results, according to the Denver Developmental Screening Test(DDST). There was a significant developmental delay noted in the language and fine motor-adaptive sector. 3. It is anticipated that developmental delays would increase in severity by older the mean age of orphanage infants and longer the time being raised in orphanage. It would be concluded that the physical growth and developmental status of orphaned infants were very vulnerable and serious and it is suggested that there needed an effective intervention strategies to promote growth and development of infants in orphanage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4754-4773
• /
• 2018

In sensor medium access control (SMAC) protocol, sensor nodes can only access the channel in the scheduling and listening period. However, this fixed working method may generate data latency and high conflict. To solve those problems, scheduling duty in the original SMAC protocol is divided into multiple small scheduling duties (micro duty MD). By applying different micro-dispersed contention channel, sensor nodes can reduce the collision probability of the data and thereby save energy. Based on the given micro-duty, this paper presents an adaptive duty cycle (DC) and back-off algorithm, aiming at detecting the fixed duty cycle in SMAC protocol. According to the given buffer queue length, sensor nodes dynamically change the duty cycle. In the context of low duty cycle and low flow, fair binary exponential back-off (F-BEB) algorithm is applied to reduce data latency. In the context of high duty cycle and high flow, capture avoidance binary exponential back-off (CA-BEB) algorithm is used to further reduce the conflict probability for saving energy consumption. Based on the above two contexts, we propose an improved SMAC protocol, micro duty adaptive SMAC protocol (MDA-SMAC). Comparing the performance between MDA-SMAC protocol and SMAC protocol on the NS-2 simulation platform, the results show that, MDA-SMAC protocol performs better in terms of energy consumption, latency and effective throughput than SMAC protocol, especially in the condition of more crowded network traffic and more sensor nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.382-390
• /
• 2005

Huffman codes are widely used for image and video data transmission. As the increase of real-time data, a lot of studies on effective decoding algorithms and architectures have been done. In this paper, we proposed a balanced binary search tree for Huffman decoding and compared the performance of the proposed architecture with that of previous works. Based on definitions of the comparison of codewords with different lengths, the proposed architecture constructs a balanced binary tree which does not include empty internal nodes, and hence it is very efficient in the memory requirement. Performance evaluation results using actual image data show that the proposed architecture requires small number of table entries, and the decoding time is 1, 5, and 2.41 memory accesses in minimum, maximum, and average, respectively.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.440-452
• /
• 2021

The purpose of this study was to determine if an 8-week therapeutic riding (TR) program was effective in improving the walking ability of students with intellectual disabilities. Thirteen students diagnosed with intellectual disabilities participated in the TR program. TR sessions were conducted twice a week (30 min per session), with a total of 16 rides taking place over an 8-week period. A gait measurement analyzer was used to measure progress based on a turn test (6-m walking and turning test), walk test (10-m walking), and timed up and go (TUG) test. Measurements were made three times: before horse-riding (P0), after 4 weeks (8 rides) of horse-riding (P1), and after 8 weeks (16 rides) of horse-riding (P2). Data analysis was conducted using SPSS software (ver. 22.0). Descriptive statistics were generated on the general characteristics of the subjects, and the Kolmogorov-Smirnov test was used to verify the normality of the data. Because of the lack of normality, the data were analyzed using a nonparametric method and the significance level was set to 0.05. Measurements of the duration of the forward gait cycle (s) in the turn test and the forward gait speed (m/s) in the walk test indicated improved walking ability after the TR program (p < 0.001); the stride length (% height) also increased significantly (p < 0.05). The walk test revealed a significant effect of the program on the duration of the forward gait cycle (p < 0.05), while there were significant improvements on the left and right of the elaborated strides (p < 0.001). No significant improvement in TUG test performance was observed after the TR program. In this study, an 8-week TR program had positive results on gait. Therefore, further research is merited, where TR programs are likely to improve the walking ability of individuals with intellectual disabilities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.395-401
• /
• 2018

Recently, most of mobile devices are equipped with GNSS (Global Navigation Satellite System). When the GNSS signal is available, it is easy to obtain position information. However, GNSS is not suitable solution for indoor localization, since the signals are normally not reachable inside buildings. A wide varieties of technology have been developed as a solution for indoor localization such as Wi-Fi, beacons, and inertial sensor. With the increased sensor combinations in mobile devices, mobile devices also became feasible to provide a solution, which based on PDR (Pedestrian Dead Reckoning) method. In this study, we utilized the combination of three sensors equipped in mobile devices including accelerometer, digital compass, and gyroscope and applied three representative PDR methods. The proposed methods are done in three stages; step detection, step length estimation, and heading determination and the final indoor localization result was evaluated with terrestrial LiDAR (Light Detection And Ranging) data obtained in the same test site. By using terrestrial LiDAR data as reference ground truth for PDR in two differently designed experiments, the inaccuracy of PDR methods that could not be found by existing evaluation method could be revealed. The firstexperiment included extreme direction change and combined with similar pace size. Second experiment included smooth direction change and irregular step length. In using existing evaluation method which only checks traveled distance, The results of two experiments showed the mean percentage error of traveled distance estimation resulted from three different algorithms ranging from 0.028 % to 2.825% in the first experiment and 0.035% to 2.282% in second experiment, which makes it to be seen accurately estimated. However, by using the evaluation method utilizing terrestrial LiDAR data, the performance of PDR methods emerged to be inaccurate. In the firstexperiment, the RMSEs (Root Mean Square Errors) of x direction and y direction were 0.48 m and 0.41 m with combination of the best available algorithm. However, the RMSEs of x direction and y direction were 1.29 m and 3.13 m in the second experiment. The new evaluation result reveals that the PDR methods were not effective enough to find out exact pedestrian position information opposed to the result from existing evaluation method.

• Agricultural and Biosystems Engineering
• /
• v.3 no.1
• /
• pp.44-54
• /
• 2002

A brief review of current status in the field of agricultural spray and future research challenges are presented. Researches on the pesticides sprays, pollen sprays, postharvest sprays, and biological control agent sprays among the various applications of agricultural spray were selected and reviewed. In the agrochemical sprays, the techniques to increase the deposition such as electrospray and reduce the drift such as introductions of drift retardants and of mechanical means are reviewed. The introduction of mechanical means includes low drift, air-assisted, air inclusion, shield or shroud assisted and pulse flow nozzles. For flat fan nozzles, the data of breakup length and thickness of liquid sheet are essential to understand the atomization processes and develop the transport model to target In the air-assisted spray technology to reduce drift, further works on the effect of application height on drift and air assistance on droplet size should be followed. In addition, methods for quantifying the included air in the air inclusion techniques are required. The atomization characteristics of biopesticides spray are not being elucidated and the formulations of biopesticides should be taken into account the spray characteristics of existing nozzle and sprayer. A few researches on the droplet size of fallout can be found in the literature. A combined technology with electrostatic method into one of method for the reduction of drift may be an effective strategy for increasing deposition and reducing drift. Only an integrated approach involving all stakeholders such as engineers, chemists, and biologists, etc. can result in improved application of agricultural spray.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.2
• /
• pp.281-295
• /
• 1999

The purpose of this study is to provide the basic data for the development of new pay system of hospitals by analyzing the status and problems of current pay system. The pay systems of 20 nationwide hospitals were analyzed and compared with the average pay level in Korea. In addition, the annual trend of pay system was analyzed. Based on this study, the following suggestions can be made. First, the pay levels of hospitals are, in some types of workers, lower than average. Hospitals should take much efforts to improve the payment capability through the effective management. Second, the effort to raise the proportion of basic pay to the total pay and to simplify the pay system on the basis of basic pay rather than the allowance and bonus should be made. Third, the pay system based on the length of service should be revised into the one based on work capability, achievement and performance in case of professional, clerical and managerial jobs. Fourth, the pay system determined depending on the power relationship between the labor unions and the management should be improved into the one, with which workers can feel reliable and satisfied through the revealing of the payment ability and the management improvement.

• Health Policy and Management
• /
• v.7 no.1
• /
• pp.125-154
• /
• 1997

The hospital, clinical department and the physician factor in explaining variations of hospital resource use in surgically admitted patients was compared. This analysis was based on 6, 361 discharges in 28 hospitals for three surgical conditions - lens procedures anal and stomal procedures, uterine and ovarian procedures using medical insurnce claim data. The results were as follows: 1. Regression analysis indicated that the hospital and clinical department characteristics, such as hospital ownership and size, were more significant predictors of the resource use indicators than the physician and patients' social characteristics. 2. Regarding to the physician factors, the hospital where the physician received the residency training and the medical shool where he/she graduated had less effect compared to the hospitals where he/she currently works. Between the residency trained hospital and medical school, the is more important than the latter. 3. When the hospital charges were divided into type of service provided i. e. room, drug, laboratory & radiologic, procedure & operation, and anesthesic charges, variance due to the hospital factor was larger than that due to the physician factor in each item. In summary, the hospital and clinical departmental factor played an important role than physician factor ; indicating to reduce the variation in hospital resource use, the policy that affects hospital behavior would be more effective than that targets individual physician behavior.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.621-626
• /
• 1998

An experimental investigation on the reinforcing bar corrosion and relationshid of reinforcing bar and concrete bond strength has been conducted to establish the allowable limit of rust in the construction field. The reinforcing bars used in this study were rusted before embedding in concrete. The first component of this experiment is to make rust of reinforcing bar rust artificially based on Faraday's theory at certain rates such as 2, 4, 6, 8 and 10% of reinforcing bar weight. For estimation of the amount of rust by weight, Clarke's solution and Shot blasting were adopted and compared. Parameters include 240 and 450kg/㎠ of compressive strengths and diameter of reinforcing bar (16, 19 and 25mm) corresponding development length for pull-ort test. And, pull-out tests were carried. out according to KSF 2441 and ASTMC 234 to investigate the effect of the corrosion rate on reinforcing bar-concrete bond behavior. It is found from the test results that the test techniques for corrosion of bar used in this study is relatively effective and correct test method. Results shows that up to 2% of rust increases the bond strength regardless of concrete strength and diameter of reinforcing bar like the existing data. It might be because of the roughness from rust. As expected, the bond strength increases as compressive strength of concrete increases and the diameter of bar decreases.