• 제목/요약/키워드: Effect of depth variation

검색결과 293건 처리시간 0.032초

지오텍스타일 매트의 설치에 의한 개착식 터널 라이닝에 작용하는 토압의 변화 (Variation of Earth Pressure Acting on the Cut-and-Cover Tunnel Lining due to Geotextile Mat Reinforcement)

  • 펄디난드 이 바우티스타;박이근;임종철;주인곤
    • 한국지반공학회논문집
    • /
    • 제23권3호
    • /
    • pp.25-40
    • /
    • 2007
  • 얕은 터널의 개착식 터널 라이닝에 발생하는 과잉토압은 라이닝의 변형과 손상을 유발하는 역학적 주요인자들 중의 하나이며(Kim, 2000), 과잉토압은 되메움토의 다짐불량, 자중에 의한 압밀, 강우의 침투에 의한 다짐, 차량에 의한 진동 등에 의해 발생할 수 있다(Komiya et al., 2000; Taylor et al., 1984; Yoo, 1997). 터널 라이닝에 발생하는 토압을 구하기 위한 많은 시험이 행해졌지만, 부등침하와 과잉토압을 줄일 수 있는 보강대책을 수립하기 위한 사례는 없다. 본 연구는 모래 지반에 $1.0D\sim1.5D$ 깊이에 개착식으로 시공하는 원형의 강성 터널에 작용하는 토압에 관한 것으로 진동다짐의 영향을 모형실험에서 충분히 반영하기 위하여 100Hz의 진동주파수를 사용하였다. 본 연구에서는 개착식 터널 라이링에 작용하는 부등침하와 과잉토압을 줄이기 위해서 지오텍스타일 매트를 설치하였다. 지오텍스타일 매트의 보강에 의한 부등침하와 토압의 감소효과를 확인하기 위해 실내모형실험을 수행하였다. 실내모형실험에서 토피, 매트 보강형태, 절취면의 거칠기 등을 달리하여 가장효과적인 방법을 구하였다. 절취면의 거칠기 달리하기 위해 사면에 사포#100, 사포#400과 acetate 부착하였습니다. 무보강과 매트 보강에 대한 모형실험을 실시하여 구한 토압을 비교하여 매트 보강효과를 살펴보았으며, 사진분석법(Park, 2003)을 이용하여 지반의 변형을 분석하였다.

하계 서태평양의 초미소 식물플랑크톤 분포 특성 연구 (The Summer Distribution of Picophytoplankton in the Western Pacific)

  • 노재훈;유신재;강성호
    • 환경생물
    • /
    • 제24권1호
    • /
    • pp.67-80
    • /
    • 2006
  • 환경특성이 초미소 식물플랑크톤의 분포에 미치는 영향을 파악하기 위해 서태평양의 열대와 아열대 수역(TSWP)과 동해에서 2002년 9월 조사를 하였고, 동중국해 대륙붕수역 (C-ECS)은 2003년 8월에 조사를 수행하였다. 초미소 식물플랑크톤은 flow cytometry 방법을 이용 Synechoroccus, Prorhlorococcus 그리고 picoeukaryotes의 3개체군으로 구분 계수하였다. 물리화학적 환경이 상이한 3곳의 조사수역 별로 초미소 식물플랑크콘들의 수직분포, 100m 수심까지 적분된 풍도를 비교하였다. 분석결과 synechococcus와 Prochlorococcus의 적분된 개체수는 3곳의 조사수역에서 서로 상반되는 결과를 보였다. Synechococcus는 TSWP에서 정점평균 $84.5X10^{10}\;cells\;m^{-2}$의 풍도를, C-ECS에서 $305.6X10^{10}\;cells\;m^{-2}$를 동해에선 $124.5X10^{10}\;cells\;m^{-2}$의 풍도를 보여 영영염이 풍부한 지역에서 풍도가 증가하는 경향을 보였다. 이에 반해 Prochlorococcus는 빈 영양 환경의 TSWP에서 $504.5X10^{10}\;cells\;m^{-2}$의 가장 높은 풍도를 보였으며, 영양염 환경이 양호한 C-ECS에서 낮은 풍도를 보이는 독특한 분포양상을 나타냈다. Picoeukaryotes는 Synechococcus와 유사한 지역적 변화를 보였으나 풍도는 약 1/10정도를 나타냈다. Synechococcus와 picoeukaryotes는 모든 정점에서 출현한 반면 Prochlorococcus는 일반적으로 C-ECS와 동해의 저염 환경에서 출현하지 많았다. Synechococcus와 Prochlorococcus의 수층별 평균 풍도의 수직분포는 표면 혼합층에서 유사한 수준을 보이다 이심에서 급격한 감소를 나타냈다. 그러나 TSWP에선 풍도의 급격한 감소가 나타나지 많고 100 m 수심까지 높은 풍도를 나타냈다. Picoeukaryotes는 C-ECS에서 100 m까지 유사한 수준의 풍도를 보였으며, 동해의 $20\sim30\;m$ 수심에선 최대 풍도층이 나타났다.

Effect of micro-environment in ridge and southern slope on soil respiration in Quercus mongolica forest

  • Lee, Jae-Seok
    • Journal of Ecology and Environment
    • /
    • 제42권4호
    • /
    • pp.210-218
    • /
    • 2018
  • Background: Soil respiration (Rs) is a major factor of the absorption and accumulation of carbon through photosynthesis in the ecosystem carbon cycle. This directly affects the amount of net ecosystem productivity, which affects the stability and sustainability of the ecosystem. Understanding the characteristics of Rs is indispensable to scientifically understand the carbon cycle of ecosystems. It is very important to study Rs characteristics through analysis of environmental factors closely related to Rs. Rs is affected by various environmental factors, such as temperature, precipitation, soil moisture, litter supply, organic matter content, dominant plant species, and soil disturbance. This study was conducted to analyze the effects of micro-topographical differences on Rs in forest vegetation by measuring the Rs on the ridge and southern slope sites of the broadly established Quercus mongolica forest in the central Korean area. Method: Rs, Ts, and soil moisture data were collected at the southern slope and ridge of the Q. mongolica forest in the Mt. Jeombong area in order to investigate the effects of topographical differences on Rs. Rs was collected by the closed chamber method, and data collection was performed from May 2011 to October 2013, except Winter seasons from November to April or May. For collecting the raw data of Rs in the field, acrylic collars were placed at the ridge and southern slope of the forest. The accumulated surface litter and the soil organic matter content (SOMC) were measured to a 5 cm depth. Based on these data, the Rs characteristics of the slope and ridge were analyzed. Results: Rs showed a distinct seasonal variation pattern in both the ridge and southern slope sites. In addition, Rs showed a distinct seasonal variation with high and low Ts changes. The average Rs measurements for the two sites, except for the Winter periods that were not measured, were $550.1\;mg\;CO_2m^{-2}h^{-1}$ at the ridge site and $289.4\;mg\;CO_2m^{-2}h^{-1}$ at the southern slope, a difference of 52.6%. There was no significant difference in the Rs difference between slopes except for the first half of 2013, and both sites showed a tendency to increase exponentially as Ts increased. In addition, although the correlation is low, the difference in Rs between sites tended to increase as Ts increased. SMC showed a large fluctuation at the southern slope site relative to the ridge site, as while it was very low in 2013, it was high in 2011 and 2012. The accumulated litter of the soil surface and the SOMC at the depth range of 0~5 cm were $874g\;m^{-2}$ and 23.3% at the ridge site, and $396g\;m^{-2}$ and 19.9% at the southern slope site. Conclusions: In this study, Rs was measured for the ridge and southern slope sites, which have two different results where the surface litter layer is disturbed by strong winds. The southern slope site shows that the litter layer formed in autumn due to strong winds almost disappeared, and while in the ridge site, it became thick due to the transfer of litter from the southern slope site. The mean Rs was about two times higher in the ridge site compared to that in the southern slope site. The Rs difference seems to be due to the difference in the amount of litter accumulated on the soil surface. As a result, the litter layer supplied to the soil surface is disturbed due to the micro-topographical difference, as the slope and the change of the community structure due to the plant season cause heterogeneity of the litter layer development, which in turn affects SMC and Rs. Therefore, it is necessary to introduce and understand these micro-topographical features and mechanisms when quantifying and analyzing the Rs of an ecosystem.

만곡 및 세굴 영향에 의한 유속변화를 고려한 호안설계방법 적용성 검토 (Study on Applicability of River Revetment Design for consideration of Velocity Variation due to Meandering and Scour Effect)

  • 김수영;윤광석
    • 한국산학기술학회논문지
    • /
    • 제17권12호
    • /
    • pp.17-25
    • /
    • 2016
  • 호안은 하천제방의 비탈면이 침식되지 않도록 보호하는 기능을 갖는다. 호안의 설계가 적정하지 않을 경우 강한 유속과 소류력에 의해 제방이 세굴되어 붕괴에 이를 수도 있다. 따라서 호안의 설계시 필요한 대표유속을 산정하는 것은 매우 중요하나 대부분 1차원 부등류해석에서 얻어진 수위와 평균유속자료를 적용한다. 이 경우 만곡 수로에서 발생하는 자유소용돌이와 강제소용돌이에 의한 유속증가는 반영되지 않으므로 만곡부 호안의 안정성을 확보하기 위해서는 대표유속에 대한 보정이 필요하다. 본 연구에서는 수치모의를 통해 단면의 최대유속과 평균유속을 산정하여 만곡 및 세굴영향을 고려한 대표유속 산정방법의 적용성에 대해 검토하였다. 그 결과 단면평균유속에 만곡의 영향과 세굴의 영향을 고려하여 적용한 대표유속과 수치모의결과에 추출된 최대유속을 비교한 결과가 거의 일치하는 것으로 나타났다. 또한, 호안재로로써 돌망태를 사용하는 경우에 대해서 만곡하도와 직선하도 일때의 사석크기를 기존 설계식에 적용하여 비교하였다. 향후, 우리나라의 특성에 맞는 호안설계방법을 제시하기 위하여 하천특성이 다른 대표적인 하천에 대한 추가적인 수치모의 및 분석이 필요하며, 이때 본 연구결과가 기초자료로 활용될 수 있을 것으로 기대된다.

수종(數種)의 침엽수재(針葉樹材)의 로타리 단판(單板) 절삭(切削)과 건조(乾燥) (Rotary Veneer Peeling of Some Softwoods and Its Veneer Drying)

  • 정희석;이남호;여환명;이준호;유태경
    • Journal of the Korean Wood Science and Technology
    • /
    • 제24권1호
    • /
    • pp.34-47
    • /
    • 1996
  • Veneers of two nominal thicknesses, 1.5 and 2.5mm, were rotary peeled from Japanese larch (Larix leptolepis). Dahurian larch (Larix gmelinei) and Radiata pine (Pinus radiata) bolts unheated and heated in the water vat temperature of $66^{\circ}C$ by rising a final temperature at 10cm core of $60^{\circ}C$ to remain core diameter of 11.4cm. 1.5 and 2.5mm thick veneer cut from the heated Japanese larch were significantly thinner than those of the unheated bolt and 2.5mm thick veneer cut from the heated Dahurian larch were significantly thicker than that of the unheated bolt. 1.5mm thick Dahurian larch veneer and 1.5 and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts, respectively. Check distance on the loose side of 1.5mm thick veneer cut from the heated Radiata pine was significantly wider than that of the unheated bolt. However check distances on the loose side of 1.5 and 2.5mm thick Japanese larch and Dahurian larch veneers and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts. Also the depth of check on the loose side of three species showed insignificantly difference between the unheated and heated bolts. Arithmatic mean deviation($R_a$) and maximum height($R_{max}$) of the profile on the loose side of dried veneer by preheating the bolt compared with unheated bolts were different among apecies and between veneer thickness. The preheating treatment slightly affected qualities of these thin veneers such as 1.5 and 2.5mm. The yield of 2.5mm thick veneer from the heated radiata pine was significantly higher than that of the unheated bolt. However the yield of 2.5mm thick veneer for other two species and 1.5mm thick veneer for three species showed insignificant difference between the unheated and heated bolts. The yield of 2.5mm thick veneer for three species were higher than those of 1.5mm thick veneer. The average yields of green veneer of Japanese larch. Dahurian larch and Radiata pine were 57.1, 55.1 and 54.0 percent, respectively. Variables such as initial MC. drying time and veneer thickness had strong effect for Japanese larch veneer, less effect for Radiata pine veneer and nuch less effect on final MC for Dahurian larch veneer in jet drying. Correlation between the current MC and the drying time of Dahurian larch with low variation of initial MC was higher than those of Japanese larch and Radiata pine veneer with high variation of initial MC in high temperature drying. Thickness shrinkages of 2.5mm thick veneer for Japanese larch and Radiata pine were higher than those of 1.5mm thick veneers, but shrinkages of Dahurian larch veneer were similar between two nominal veneer thicknesses.

  • PDF

여름철 공원 수림지 가장자리의 온열환경 기울기 변화 - 하동송림과 함양상림을 대상으로 - (The Gradient Variation of Thermal Environments on the Park Woodland Edge in Summer - A Study of Hadongsongrim and Hamyangsangrim -)

  • 류남형;이춘석
    • 한국조경학회지
    • /
    • 제43권6호
    • /
    • pp.73-85
    • /
    • 2015
  • 본 연구는 공원 수림지 경계로부터 내부로의 거리에 따른 수림지 가장자리의 온열환경에 대한 효과를 규명하고자 하였다. 이를 위해 전형적인 여름 날씨를 나타낸 2015년 7월 31일부터 8월 5일까지 6일간 소도읍에 소재하고 있는 장령림인 하동송림의 소나무 순림(수령: $100{\pm}33$년, 울폐도: 75%, 수고: $12.8{\pm}2.7m$, 지하고: $9.8{\pm}2.7m$, N $35^{\circ}03^{\prime}34.7^{{\prime}{\prime}}$, E $127^{\circ}44^{\prime}43.3^{{\prime}{\prime}}$, 표고 7~10m) 남측 가장자리와 함양상림의 졸참나무-개서어나무 군락(수령: 졸참나무 58~123년, 개서어나무 102~125년, 울폐도: 96%, 수고: 교목층 $18.6{\pm}2.3m$, 아교목층 $5.9{\pm}3.2m$, 관목층 $0.5{\pm}0.5m$, 지하고는 교목층 $11.0{\pm}3.2m$, 아교목층 $3.1{\pm}1.7m$, 관목층 $0.2{\pm}0.3m$, 초본층의 피도 60%, N $35^{\circ}31^{\prime}28.1^{{\prime}{\prime}}$, E $127^{\circ}43^{\prime}09.8^{{\prime}{\prime}}$, 표고 170~180m) 동측 가장자리의 경계로부터 내부로의 거리별 기온, 상대습도, 풍속, MRT나 UTCI를 측정 및 분석하였다. 그리고 비선형 시그모이드 함수를 적용하여 수림지 가장자리가 가지는 경계로부터의 거리에 따른 기온, 상대습도, 풍속, MRT, UTCI의 저감효과를 구명하였다. 깊이의 결과 값이 -를 나타내는 것은 수림지의 바깥을 의미한다. 1) 최고 기온, 최저 상대습도, 최고 기온시 풍속에 대한 수림지 가장자리 효과가 미치는 깊이는 상록침엽수림인 하동송림의 경우는 수림지의 경계로부터 각각 $12.7{\pm}4.9m$, $15.8{\pm}9.8m$ 그리고 $23.8{\pm}26.2m$였으며, 낙엽활엽수림인 함양상림의 경우는 수림지의 경계로부터 각각 $3.7{\pm}2.2m$, $4.9{\pm}4.4m$ 그리고 $2.6{\pm}7.8m$였다. 2) 이용자가 체감하는 더위에 직접적인 영향을 주는 인체가 흡수한 온열환경에 근거한 최고 MRT와 최고 UTCI(체감더위지수)에 대한 수림지 가장자리 효과가 미치는 깊이는 하동송림의 경우는 수림지의 경계로부터 각각 $7.1{\pm}1.7m$$4.3{\pm}4.6m$였으며, 함양상림의 경우는 수림지의 경계로부터 각각 $5.8{\pm}4.9m$$3.5{\pm}4.1m$였다. 3) 미기후 즉 온열환경 요소인 기온, 상대습도, 풍속 그리고 인체가 흡수한 온열환경에 근거한 주간(10:00~17:00) MRT와 UTCI에 대한 수림지 가장자리의 효과는 식생밀도가 상대적으로 높고, 하층식생이 발달한 함양상림이 식생밀도가 낮고, 하층식생의 거의 없는 하동송림에 비해 높게 나타났다. 따라서 체감 더위지수인 UTCI의 10분 평균값이 최댓값을 나타낸 시점을 기준으로 하면, 수림지 경계로부터 내부로의 거리가 하동송림의 경우는 $4.3{\pm}4.6m$, 함양상림의 경우는 $3.5{\pm}4.1m$에서 온열환경 기울기의 변화가 비교적 완만해지므로, 수림지 계획시 이용객의 온열환경을 고려한 완충대의 적정 폭은 하동송림의 경우는 4.3~8.9m, 함양상림의 경우는 3.5~7.6m이다. 또한 온열환경에 대한 완충효과를 극대화하기 위해서, 수림지 완충대 식생의 수직구조는 다층 구조의 수관과 닫힌 가장자리로 하여야 한다.

하향 분사식 미니스프링클러의 낙수방지 메카니즘과 살수 특성 (Mechanism and Spray Characteristics of a Mini-Sprinkler with Downward Spray for Prevention of Drop Water)

  • 김홍규;정성원
    • 생물환경조절학회지
    • /
    • 제16권3호
    • /
    • pp.210-216
    • /
    • 2007
  • 본 연구는 하향 분사식 미니스프링클러의 낙수방지를 위한 새로운 제안으로 패킹부를 구성하여 패킹과 패킹지지부, 패킹 연결지지체의 메카니즘 분석과 구조 해석을 통하여 패킹부 소재 선정의 타당성을 확인하여 하향 분사식 미니스프링클러의 낙수방지 메카니즘을 개발하고, 제품을 제작하여 살수특성 실험을 수행한 결과는 다음과 같다. 낙수방지를 위하여 삽입되는 패킹부의 재료는 구조해석결과, 압력변화에 대응할 수 있는 재질로서 패킹재는 천연고무(ASTM; NR), 패킹지지체는 폴리프로필렌(PP)이 적합함을 확인하였다. 성능시험 결과, 미니스프링클러의 접속관에 용수를 공급할 때와 중단되는 과정의 대기압과 평형상태에서 선정된 패킹 및 패킹지지체는 압력제어 기능을 정확히 수행하여 낙수가 거의 발생하지 않고, 압력변화에도 민감하게 대응함을 확인하였다. 작용압력별 살수특성 성능을 분석한 결과, 유효살수반경, 유효살수면적, 평균살수심, 최대살수심, 유효최대살수심은 작용압력이 증가함에 따라 모두 증가하는 것으로 나타났다. 살수높이별 살수특성 성능을 분석한 결과, 유효살수반경과 유효살수면적은 살수 높이가 0.2m일 때 가장 낮은 값을, 0.3m일 때 가장 높은 값을 보였고, 그 이상 살수 높이가 높아지면 반대로 감소하였으며, 평균살수심은 살수높이가 높아질수록 감소하였다. 제안된 하향 분사식 미니스프링클러는 패킹부의 영향으로 압력이 증가함에 따라 살수성능이 유연성 있게 변화하여 급격한 변화를 나타내지 않았고, 용수압력이 감소될 때에는 작용압력이 $1.1kgf/cm^2$이상의 범위에서만 살수되었으며, 그 이하에서는 제안된 패킹부에 의해 하향 분사식 미니스프링클러 본체로 공급되는 용수가 차단되어, 대기압과 평형상태에 있는 물의 자중과 중력작용에 의한 자유낙하를 방지함으로서 물방울의 형성 및 낙수 발생의 예방을 확인하였다.}\;10^4\;cell/ml$이던 것이 3 일 후 $138\;{\times}\;10^4\;cell/ml$였고, 실험종료시인 5 일 후에는 $385\;{\times}\;10^4\;cell/ml$로 증식되어 가장 높은 증식률을 보였다. 참굴 D상 유생을 대상으로 먹이효과를 조사한 결과 실험구와 대조구간 유생의 성장 및 생존율에 유의한 차이를 보이지 않았다.C$에서 73.3%, $10^{\circ}C$에서 63.3% 및 $5^{\circ}C$에서 56.7%로 수온이 $30^{\circ}C$ 이내에서는 높을수록 높은 경향을 보였다. 염분에 따른 잠입 실험 결과는 실험 개시 300분 경과 후 염분 30 psu에서 93.3%로 가장 높았고, 35 psu에서 90.0%, 25 psu에서 83.3%, 20 psu에서 60.0%, 15 psu 이하에서는 거의 잠입이 이루어 지지 않았다. 따라서, 적정 살포를 위한 잠입률은 치패의 크기와 상관없이 저질종류는 모래 (75%) + 뻘 (25%), 입자크기는 1 mm 모래에서 높게 나타났다. 공기 중 노출시간은 짧을수록, 수온은 $30^{\circ}C$ 이내에서 높을수록, 염분은 20-35 psu 이내에서 높을수록 잠입률이 높은 경향을 나타내었다. 교수학습모형에 관련된 지식을 묻는 내용으로 주로 출제되었다. 이에 구체적인 개선방안으로 특정 교수학습모형의 이론적 토대가 되고 전체적인 교수설계를 하기 위한 기본 바탕이 될 수 있는 교수학습이론에 관한 내용, 또한 현재가정과교육에 있어서 유용한 교수학습법이라고 입증되고 있는 실천적 추론 가정과 수업에 관한 내용으로의 확대를 제안하였다. 가정과교육평가 문항의 출제는 대다수의 문항이 수행평가에 관한 문항내용으로

환부 부착용 거즈의 Bolus Effect에 관할 고찰 (The Consideration of Bolus Effects of Games Attached on Lesion area)

  • 박주영;주상규;박용철;한영이;신은혁;박영환
    • 대한방사선치료학회지
    • /
    • 제16권1호
    • /
    • pp.51-56
    • /
    • 2004
  • 상처 보호를 위해 환부에 부착하는 거즈가 체표 선량(skin dose) 및 심부 선량(최고 선량)에 미치는 영향을 조사하여 표재성 종양의 방사선 치료 시 bolus의 대용으로 이용 가능한지 알아보고자 한다. 4MV Photon(CL600C, Barian, US)을 대상으로 폴리스틸렌 팬톰(25(W) X25(L) X 40(H) cm3)과 평형 평판형 전리함(Markus chamber, PTW, US)을 이용하여 환부 부착용 거즈의 두께와 재질을 변화시키면서 체표선량 및 심부선량을 측정하였다. 거즈의 두께는 5장, 10장, 15장을 대상으로 하였으며 재질은 순수 거즈와 바셀린을 도포한 거즈를 구분하여 측정하였다. 또한 bolus 사용 시와 비교하기 위해 동일한 조건에서 bolus 0.5, 1.0 cm을 대상으로 표면선량 및 심부 선량을 측정하여 비교 분석하였다. 최고 선량점을 기준으로 체표 선량은 open beam일 경우 $34.78\%$, 거즈 5장, 10장, 15장 부착 시 각각 69, 80, $91\%$로 거즈 두께와 함께 증가하였다. 또한 바셀린 거즈 5장, 10장, 15장 부착시 각각 98, 100, $98\%$의 결과치가 나왔다. 한편, 0.5 cm bolus와 5장의 거즈를 조합하였을 때의 체표선량은 $96\%$로 측정되었다. 방사선 치료 시 체표에 부착한 거즈는 산란체로 작용하여 심부 선량의 변화 없이 체표선량을 증가시키는데 크게 기여하였다. 그러나 체표에 최고 선량을 조사하기 위해서는 많은 두께(약 15장 이상)의 거즈를 필요로 한다. 또한 바셀린 및 bolus의 사용으로 이러한 목적은 쉽게 얻을 수 있지만 심부 선량의 변화로 선량 계산 시 이에 대한 보정이 필요하다. 따라서 측정치를 기초로 목표 체표 선량과 환자의 setup효율성을 고려한 적절한 조건을 찾는다면 bolus대용으로 거즈를 이용하는 것이 치료의 효율성을 높이는데 도움이 될 것으로 사료된다.

  • PDF

바지락 치패의 폐사에 관한 연구-I 간척지의 간출시에 있어서의 온도, 염분변화와 유입하천수의 지하염분에 미치는 영향 (Studies on the Natural Mortality of the Young Short Necked Clam, Tapes japonica-I. Seaonal Variation of the tidal Temperature, Sainity , and the Effect of Overflowing Fresh Water on the Subterranean Salinity of the Tidal Flat at Low Tide)

  • 최상
    • 한국동물학회지
    • /
    • 제9권1호
    • /
    • pp.1-6
    • /
    • 1966
  • Frequently , large masses of the young short necked clam, Tapes japonica , die at their tidal flats in summer and this phenomenon has not been explained clearly. The purpose of the present investigation is to study the thermal condition and the chlorinity level of tidal flats in which the young clam appears to be injured. A study is also mad efor the burrowing organism in the lower layer of the esturay over which the fresh water flow during the low tide. Observation are made at five places of the tidal flat near Ikawazu Fixheries Laboratory of Tokyo University during the ebb and flow tide period of the spring tide. The diurnal and monthly changes of tidal temperatures and chlorinities are measured. Results of the study are ; 1. The surface temperature of the tidal flat increases with the ebb tide, reaches the highest between 12-14PM, and gradually decreases thereafter. The temperatures of tidal flat below 5 and 10 cm increase gradually until the flow tide reaches the surface. 2. At the spring tide in summer , the diurnal change of surface of the tidal flat temperature is very extensive ; it reaches 37-39$^{\circ}C$ in August. At the depths of 5 and 10 cm the temperature remains at 33 $^{\circ}C$ and 31$^{\circ}C$ , respectively. 3. The chlorinity of the tidal flat is higher during May through June and lower July through August, and this seems to be related to the amount of rainfall. 4. The chlorinity of the surface of tidal flat increases slightly during the ebb and flow tide periods. The observed higher chlorinity of surface of the tidal flat was 18.82% Cl. 5. At near the esturay, the fresh water that overflows the tidal flat affects the chlorinity of the surface but no such influence to the depth of the flat. 6. From above observations, it is assumed that the young short necked clam in the tidal flat could be exposed to the severe change of environmental conditions. The high temperature of the tidal flat in summer and the low chlorinity of it at flood period may be considered as the change in environment.

  • PDF

전기식 온침기의 온도 변화 특성에 관한 연구 (The Characteristics of Temperature Variation in Electronic Warm Acupuncture Device)

  • 이자하;문정현;정우령;홍수화;박경은;이병욱;성원석;윤종화;김은정
    • Korean Journal of Acupuncture
    • /
    • 제40권4호
    • /
    • pp.184-193
    • /
    • 2023
  • Objectives : The purpose of this study is to understand the temperature characteristics depending on the thickness and material of the needle used with the Electronic Warm Acupuncture Device (EWAD). Methods : We controlled experimental environment and measured temperature changes of a silicon phantom in which K-type thermocouples were inserted at depths of 2, 7 mm. EWAD perfomed with acupuncture needles of various thicknesses (0.25×60 mm, 0.40×60 mm, and 0.50×60 mm) and materials (Gold 0.40×50 mm). We set non-needle (only heated with EWAD skin heater) group as a control group. Results : The maximum temperature and temperature changes of 0.40 mm, 0.50 mm needle group were significantly higher than the non-needle group. The highest temperature range in all needle groups was 0.50 mm needle group (41.44±0.31℃). However, the 0.25 mm needle group was not significantly different from the non-needle group. Maximum temperature of gold needle group was significantly higher than stainless steel needle group. Temperature changes of gold needle group were higher than stainless steel group at the depth of 7 mm. Conclusions : It was found that needle thickness and material of acupuncture had an effect on the temperature of the EWAD. When performing EWAD treatment, consideration of thickness and material of acupuncture is needed. Future research is needed using phantoms that can reflect actual clinical situations and better mimic the human body.