Browse > Article
http://dx.doi.org/10.5762/KAIS.2016.17.12.17

Study on Applicability of River Revetment Design for consideration of Velocity Variation due to Meandering and Scour Effect  

Kim, Sooyoung (Hydro Science and Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology)
Yoon, Kwang Seok (Hydro Science and Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.17, no.12, 2016 , pp. 17-25 More about this Journal
Abstract
Revetments help protect levee slopes from erosion. If the design of the revetment is not appropriate, the levee may collapse as a result of scouring due to the strong flow velocity and tractive force. Therefore, when designing a revetment, it is very important to calculate the representative velocity. However, the average velocity and depth calculated by 1-D varied flow analysis are generally applied to the design, which do not reflect the increase in velocity caused by the free and force vortex. Therefore, it is necessary to correct the representative velocity in order to ensure the stability of the revetment in a meandering channel. In this study, the applicability of the method of calculating the representative velocity considering the curve and scour was studied (by comparing it with) the average and maximum velocities determined by numerical simulation. The representative velocity corrected for the effect of the curve and scour and the maximum velocity calculated by the numerical simulation were found to match quite well. In addition, the riprap size of the gabion in the meandering and straight channels were compared by applying them to the conventional design formulas. In the future, it is necessary to perform additional numerical simulations for various rivers with different characteristics, in order to propose a method of designing a suitable revetment for Korean characteristics. At this time, the results of this study are expected to be able to be used as basic data.
Keywords
Meandering river; Radius curvature; Levee revetment; Velocity correction parameter; Representative velocity;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 S. V. Isbash, "Construction of dams by dumping stones in flowing water, Translated by A. Dorijikov", U.S. Army Engineering District, Eastport, Me., 1935.
2 K. W. Pilarczyk, "Stability Criteria for Revetments", Hydraulic Engineering, Proceedings of the 1990 National Conference, American Society of Civil Engineers, New York. pp. 245-250, 1990.
3 M. Escarameia, and R.W.P. May, "Channel protection-Turbulence downstream of structures", Report SR 313, HR Wallingford, 1992.
4 S. T. Maynord, "Corps Riprap Design Guidance for Channel Protection", International Riprap Workshop. Colorado State University, Fort Collins, Colorado. 1993.
5 S.S. Bae, S.Y. Lee and H.K. Jee, "Study on Critical Allowable Shear Stress of Filling Rocks with Mattress Revetment", Journal of Korea Water Resources Association, vol. 41, no. 2, pp. 137-147, 2008. DOI: https://doi.org/10.3741/JKWRA.2008.41.2.137   DOI
6 D.B. Simons, Y.H. Chen L.J. Swenson, L.J., "Hydraulic test to develop design criteria for the use of reno mattresses", Simons and associates, 1984.
7 C. Kim, and N. H. Park, "A Study of the Stability Analysis of the Bank Revetment at Urban Streams in Flood Times", Journal of Korean Society of Hazard Mitigation, vol. 10, no. 6, pp. 139-145, 2010.
8 H. J. Kim and K. S. Yoon, "Suggestion of Riprap Revetment Design Techniques considering River Meandering", Journal of Korean Society of Hazard Mitigation, vol. 14, no. 6, pp. 405-411, 2014. DOI: https://doi.org/10.9798/KOSHAM.2014.14.6.405   DOI
9 JICE(Japan Institute of Construction Engineering), Dynamic Design of Revetments, Sankaido, 2007
10 Deltares, Delft3D-FLOW user manual. 2010
11 Ministry of Land, Infrastructure and Trnasport (MOLIT), River Master Plan(Rivision) in the Nam River, Ministry of Land, Infrastructure and Trnasport. 2013
12 P. F. Lagasse, P. E. Clopper, L.W. Zevenbergen and J.F. Ruff, NCHRP Report 568: Riprap Design Criteria. Recommended Specifications, and Quality Control. 2006.