• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.569-575
• /
• 1998

The purpose of this study was to evaluate the remineralization effects of fluoride-containing sealant on the artificially created enamel carious lesions. The fluoride release from the specimen of fluoride-containing sealants, the effect on enamel acid solubility and micro-hardness from the experimental sealants when applied to carious enamel surfaces were investigated. The obtained results were as follows; 1. Fluoride was a rapid rate of release during the first day, with the amount diminishing with time. The amount of fluoride released from Fuji Ionomer type III was higher than that from Teethmate-F and Helioseal-F during the 28 days of immersion(P<0.05). 2. The enamel solubility of carious enamel surface was higher than that in the Teethmate-F, Helioseal-F, and Fuji Ionomer type III (P<0.05), and there was no significant difference with Teethmate-A and Helioseal(P>0.05). 3. The microhardness value of carious enamel surface was lowest. However, there was no significant difference between the other sealants with respect to their effects on enamel hardness(P>0.05).

• Journal of Periodontal and Implant Science
• /
• v.39 no.1
• /
• pp.9-16
• /
• 2009

Purpose: The present study was performed to evaluate the effect of hydroxyapatite dental paste on tooth hypersensitivity compared to other materials. Materials and methods: In the general fluoride dental paste, strontium fluoride dental paste and hydroxyapatite dental paste, patient-performed VAS and VAS(ice test) were measured at baseline, 1weeks and 4weeks. Results: 1. In patient-performed VAS, there were significant differences reducing of tooth hypersensitivity between general fluoride toothpaste and hydroxyapatite toothpaste. 2. In operator-performed VAS(ice test), there were significant differences reducing of tooth hypersensitivity among each group, between general fluoride toothpaste and hydroxyapatite toothpaste and between general fluoride toothpaste and strontium fluoride toothpaste. Conclusion: In conclusion, hydroxyapatite toothpaste can be applied for control of tooth hypersensitivity.

• Molecules and Cells
• /
• v.27 no.2
• /
• pp.191-198
• /
• 2009

The present study was undertaken to determine whether treatment with genistein, the plant-derived estrogen-like compound influences agonist-induced vascular smooth muscle contraction and, if so, to investigate related mechanisms. The measurement of isometric contractions using a computerized data acquisition system was combined with molecular experiments. Genistein completely inhibited KCl-, phorbol ester-, phenylephrine-, fluoride- and thromboxane $A_2$-induced contractions. An inactive analogue, daidzein, completely inhibited only fluoride-induced contraction regardless of endothelial function, suggesting some difference between the mechanisms of RhoA/Rho-kinase activators such as fluoride and thromboxane $A_2$. Furthermore, genistein and daidzein each significantly decreased phosphorylation of MYPT1 at Thr855 had been induced by a thromboxane $A_2$ mimetic. Interestingly, iberiotoxin, a blocker of large-conductance calcium-activated potassium channels, did not inhibit the relaxation response to genistein or daidzein in denuded aortic rings precontracted with fluoride. In conclusion, genistein or daidzein elicit similar relaxing responses in fluoride-induced contractions, regardless of tyrosine kinase inhibition or endothelial function, and the relaxation caused by genistein or daidzein was not antagonized by large conductance $K_{Ca}$-channel inhibitors in the denuded muscle. This suggests that the RhoA/Rho-kinase pathway rather than $K^+$- channels are involved in the genistein-induced vasodilation. In addition, based on molecular and physiological results, only one vasoconstrictor fluoride seems to be a full RhoA/Rho-kinase activator; the others are partial activators.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.461-470
• /
• 2013

In order to examine the anticariogenic effect after fluoride varnish was applied to sound enamel and artificial caries enamel, anterior teeth of healthy cattle were used and divided into four groups such as group 1 (sound enamel), group 2 (application of fluoride varnish to sound enamel), group 3 (artificial caries enamel) and group 4 (application of fluoride varnish to artificial caries enamel). Remineralization on the surface of enamel and changes of crystalline structure after demineralization were observed by using a field emission scanning electron microscope (FE-SEM). Quantitative analysis of Ca and P was measured by using the energy dispersive X-ray spectrophotometer (EDS). The following conclusions were obtained: 1)Surface pattern of enamel was the roughest in group 3 due to the defects caused by porosity and microcracks. Group 4, group 1 and group 2 were followed in order; 2) It was found that pattern of crystalline structures in a group of application of fluoride varnish and a group of no application showed bigger change in artificial caries enamel than that in sound enamel. In other words, groups 4 and 1 showed a similar pattern; 3) The contents of Ca and P were higher in groups of application of fluoride varnish (group 2 and group 4) than in groups of no application of fluoride varnish (group 1 and group 3). Taken results of this study together, in the case of application of fluoride varnish, crystalline structure was changed by remineralization even in the sound enamel. In particular, porous structures showed a smooth and uniform pattern due to the recalcification in the artificial caries enamel. In addition, according to results of EDS analysis, the contents of Ca and P were increased and it had great anticariogenic effects which inhibit decalcification of sound enamel and artificial caries enamel.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.2
• /
• pp.132-139
• /
• 2024

This study aimed to compare the fluoride-releasing ability and degree of microbial attachment of a newly developed glass-hybrid restorative material (GH) with those of a high-viscosity glass ionomer (HvGIC), resin-modified glass ionomer (RMGI), and composite resin (CR). In addition, the correlation between fluoride-releasing ability and microbial attachment between materials was evaluated. Specimens were prepared in a disc shape and divided into 4 groups according to the materials (GH, HvGIC, RMGI, and CR). The fluoride release experiments were performed in each group (n = 15). The amount of fluoride released was measured on days 1, 3, 7, 14, 28, and 42 after storage. For the microbial attachment experiment, 12 specimens were produced per group using Mutans Streptococci (S.mutans ), a cariogenic microorganism. S. mutans was cultured on the specimens for 24 hours, and the number of bacteria was measured. GH had the highest cumulative fluoride release and showed a significant difference when compared with RMGI (p = 0.001) and CR (p < 0.0001). Microbial attachment was the lowest in GH; however, no significant difference was observed between the materials (p = 0.169). There was no significant correlation between fluoride release from materials and microbial attachment (p > 0.05). From this perspective, remineralization of low-mineralized areas could be expected due to the high fluoride release of GH, and the effect of delaying the progression of dental caries could be predicted from the low cariogenic microbial attachment. Therefore, GH might be a useful restorative material for treating immature permanent teeth with hypomineralized enamel. However, further studies are needed about the degree of remineralization of hypomineralized areas after restoration and the capacity to recharge fluoride.

• Journal of the Korean Ceramic Society
• /
• v.26 no.5
• /
• pp.601-608
• /
• 1989

Electrical properties of ZrF4-based heavy metla fluoride glasses were measured by the ac complex impedance method. The effects of alkali and chloride ions addition into fluoro zirconate glasses on the electrical conductivity were examined. The electrical conductivities of fluoride glasses show Arrhenian behavior in the temperature range of the experiment and were decreased by the addition of sodium fluoride up to 15mol%. Mixed alkali substitution resulted in conductivity minimum at intermediate composition which is commonly observed as mixed alkali effect' in alkali oxide glasses. Chloride ion substituted for fluoride ion was found to lower the conductivity.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.522-529
• /
• 2001

This study seeks to know the effect of fluoride topical application on the shear bond strength between enamel and fissure sealant. On group 1,2,3,4, Teethmate A(unfilled sealant) and on group 5,6,7,8 Ultraseal XT(filled sealant) were used. Group 1 and 5 were not pre-treated with fluoride and group 2 and 6 were pre-treated with 1.23% APF for 4minutes. Group 3 and 7 were pretreated with 2.0% NaF for 4 minutes. and group 4 and 8 were pumiced with abrasive containing fluoride for 10 seconds. Prepared specimens were acid etched for 30 seconds using 35% phosphoric acid, and then sealant was cured to the specimen using a 3mm diameter by 2mm height mold. They went through thermocycling. Its shear bond strength was measured, and then acid etched both groups that were pretreated with fluoride and that were not pretreated with fluoride. Then we examined the surface of the specimen with EM and came up with these results. In groups using unfilled sealant(group 1,2,3.4) there were no significant differences between oops pretreated with fluoride and groups not pretreated with fluoride. In groups using filled sealant(group 5,6,7,8), groups 6 and 7(treated with 1.23% APF 2.0% NaF respectively) showed significantly lower shear bond strength, compared to group 5 (not pretreated with fluoride) and group 8 (pumiced with abrasive containing fluoride) (p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.151-157
• /
• 1984

The purpose of this study was to compare the growth-inhibiting effect of sodium fluoride and stannous fluoride on a cariogenic strain of Streptococcus mutans exposed to the different concentration of $SnF_2$ and NaF The result were as follows: 1. The growth rate of the Streptococcus mutans was unaffected by 75 ppmF, slowed by 150 ppmF, and immediately arrested by 300 or 600 ppmF where increments of NaF were added to actively growing 12-hour broth culture. 2. $SnF_2$ slowed the growth rate at 75 ppmF, was to bactericidal initially at 150 and 300 ppmF, and was to totally bactercidal at 600 ppmF. 3. $SnF_2$ has been shown to be more effective than NaF in inhibiting the growth activity of Streptococcus mutans. 4. The inhibitory effect of fluoride compounds on the growth of Streptococcus mutans was increased in the decreased pH at concentration of 600 ppmF.

• Toxicological Research
• /
• v.14 no.2
• /
• pp.163-169
• /
• 1998

Fluoride (F), over a narrow concentration range, increases bone formation. Aluminum (Ai) too is biphasic in its action on bone, being mitogenic at very low levels and inhibitory at higher levels. Both F and Al are present in finished drinking water where the chemical interaction of these two agents is well characterized. F and AI, given individually, accumulate preferentially in bone. In addition. in vivo studies have shown that F causes the co-accumulation of Al in bone. Thus, it was necessary to determine the interactive effect of these two agents on bone mitogenesis. Calvaria were obtained from neonatal CD-1 mice and cultured with various concentrations of F (0.05~19 ppm) as NaF, Al (2 ppb~2 ppm) as $AlCl_3$ , or F and Al for 3 days at $37^{\circ}C$ on a rotating roller drum. Alkaline phosphatase activity in calvaria and $\beta$-glucuronidase activity in culture medium were determined as a measures of bone turnover. Alkaline phosphatase activity in calvaria was significantly increased by F (0.05~2 ppm) treatment and $\beta$-glucuronidase activity was slightly increased in the culture medium of calvaria treated with 0.3 ppm Al. The combination of 19 ppm F and 0.3 ppm Al increased alkaline phosphatase activity in calvaria, but did not affect $\beta$-glucuronidase activity, suggesting the interactive effect of fluoride and aluminum on bone turnover.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.416-421
• /
• 2001

The optimization of the reductant and acid concentration for stannane($SnH_4$) generation was investigated by using a continuous flow hydride generator combined with an inductively coupled plasma-atomic emission spectrometer. Several different prereductants were studied to remove the interfering effect of fluoride ion on the hydride generating of tin. The optimum acid concentration was 0.5-1.0 M for the 1-2% $NaBH_4$ and 1.0 M NaOH and the interfering effect of fluoride ion was minimized using boric acid and L-cysteine mixed solution as a prereductant. The reconveries of tin at 20 ng/mL level in the solution containing fluoride ion were 100~108 %.