• Korean Journal of Materials Research
• /
• v.17 no.7
• /
• pp.371-375
• /
• 2007

In-situ observation of electromigration behavior of eutectic SnPb solder was performed as a function of line length at $100^{\circ}C$, $6{\times}10^4A/cm$ condition in a scanning electron microscope chamber. The incubation time for edge drift and the edge drift velocity increase as line length increases, which are discussed with the void nucleation stage of solder bump and the electromigration back flux force, respectively. Finally, the existence of electromigration product (jL) and its line length dependency are also discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.412-412
• /
• 2000

This paper presents a task teaching method for off-line programming of a multi-robot system. Teaching commands were developed in order to simplify a complex teaching process, to shorten the setup time for new working environment and to have flexibility for changes in working environment. Four teaching commands can be used to automatically generate trajectories of an end-effector of the robot in electronics assembly line. The robots used in the work cell are a four-axis SCARA robot and six-axis articulated robot. Each robot is controlled in a independent way while objects, working environment and robots are modeled in corresponding modules, respectively. The off- line programming system developed uses OpenGL for a smooth graphic effect in Window s where three dimensional CAD data can be leaded for graphical modeling.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1390-1396
• /
• 2007

The line-start permanent magnet synchronous motor has a high efficiency and an advantage in constant speed operation regardless of the effect of load variation. However, it is difficult to predict the performance of characteristics accurately, because of the unbalanced starting torque with the initial starting position of the rotor and the generation of a break torque. In this paper the dynamic characteristics of the line-start permanent magnet synchronous motor are described and compared with those of the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bars in the line-start permanent magnet synchronous motor. Finally this paper gives the comparison between the simulation results and the experimental results.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.299-307
• /
• 2016

This study aims to investigate effects of the length of the buoy and sand bag line on the loss of webfoot octopus pot. A numerical modeling and simulation was carried out to analyze the process that the pot gear affected by wave using the mass spring model. Through the simulation, tensions of sand bag line under various condition were investigated by length of buoy and sand bag line. The drag force and coefficient k of an artificial shell used in the webfoot octopus pot was obtained from an experiment in a circular water channel, and the coefficient k was applied to the simulation. To verify the accuracy of the simulation model, a simple test was conducted into measuring a rope tension of a hanging shell under flow. Then, the test result was compared with the simulation. The lengths of the buoy line in the simulation were 1.12, 1.41, 1.80, 2.23, 2.69, and 3.17 times of water depth. The lengths of sand bag line were 10, 20, 30, and 40 meters, and conditions of water depth were 8, 15, 22 meters. 4 meter height and 8 second period of wave were applied to all simulations. As a results, the tension of the sand bag line was decreased as the buoy and sand bag line were increased. The minimum tension of the sand bag line was appeared in conditions that the length of the buoy line is twice of water depth and the sand bag line length is over 40 meters (except in case of depth 8 meters.).

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.3
• /
• pp.77-92
• /
• 2008

Commonality strategy is a popular design practice in designing a product line as it enables the firm cost saving and simplification in design, manufacturing, and distribution processes. However the issue of commonality has been mostly analyzed from a profit maximizing firm's perspective and, to our knowledge, there is no literature that deals with the issue from a different perspective. in this paper, we consider the issue of commonality strategy from a social welfare maximization perspective, and argue that commonality strategy used in designing of public goods can bring certain benefits not just for a firm but also for consumers, i.e., for society as a whole. While we assume certain cost saving in production process due to economies of scale under commonality strategy, we conceptualize two different effects of commonality strategy, utility effect due to cost saving and weighted-averaging effect, and show how these two effects interplay to determine the design of common attribute and desirability of commonality strategy. We also discuss how the implementation of commonality strategy differs under different objectives of a product line designer : social welfare and firm's profit maximization.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.161-169
• /
• 2004

In this study, we investigated fatigue crack growth behavior of laser welded sheet metal due to a single overload. Fatigue specimens were made using butt joint of cold rolled sheet metal that was welded by $CO_2$ laser. The fatigue crack propagation tests were performed in such a way that fatigue loading was parallel to the weld line while crack propagation was perpendicular to the weld line. Single overload was applied when fatigue crack tip was arrived near the weld line. The distances between the crack tip and the weld line at which a single overload was applied were 6, 4 and 2mm. The effect of specimen thickness and overload ratio on the fatigue behavior was determined. The plastic zone size of crack tip due to the single overload was determined from the finite element analysis. For investigating fatigue crack growth behavior, we used different thickness specimen 0.9mm and 2.0mm, and variable overload ratio applied fatigue crack propagation test. Also we used finite element analysis for investigating the plastic zone size of crack tip when single overload applied

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.4
• /
• pp.73-80
• /
• 2013

Breakdown characteristics of air in the vertical arrangement of line conductor and plane electrode in case of combustion flame on the plane electrode are examined by the application of AC. and DC voltages to the gap. In order to investigate the effect of paraffin flame on the breakdown characteristics of air, flashover voltages are measured according to the variation of the gap length and the horizontal distance between the flame and the line conductor. As the result of the experiment, flashover voltages are substantially lowered down to 29.8% in case of the AC voltage, and 16.1% in case of the negative DC voltage, when in the presence of the flame. from 100% when in the absence of flame. Flashover voltages of air in the range of smaller than 3㎝ at the horizontal distance are increased in the proportion of the gap length and the horizontal distance in case of both AC and negative DC voltages. But before the flashover occurs, the flame is extinguished by such corona wind that is produced from the line conductor when the gap length and the horizontal distance reach to a certain degree. The effect of relative air density and the phenomenon of thermal ionization are analysed as the reduction factors of flashover voltages, due to high temperature of the flame.

• The Research Journal of the Costume Culture
• /
• v.16 no.1
• /
• pp.70-87
• /
• 2008

The purpose of this study is to examine how the entertainment culture has influenced the fashion of the college students since the year 2000, and to analyze the fashion trends of those who enjoy their entertainment culture. The entertainment culture is, therefore, perceived in the most sensitive way by the college students, who belong to the latter period of their adolescence, while influencing them. Especially recently, the entertainment culture of the college students has emerged as a new symbol of the overall fashion. And its effect on the fashion has become conspicuous. The 21st entertainment culture is comprised of "club culture", which is an off-line fad, and "on-line game culture". The result of this study is as follows: Firstly, the formative way that the so-called "club culture" influenced the fashion of the college students shows that their overall fashion trends are characterized by a 'caports image' and a 'childlike-amusing image'. Secondly, the formative fashion style, influenced by the so-called "on-line game culture", presents a 'post- structural image' by using heterogeneous material in order to introduce a new point of view, and by transforming the creation style and design. And it also presents a 'homosexual image' by crossing the attractiveness of both genders. This study is baseds on the documents study.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.119-124
• /
• 2015

In this paper, we analyze the effect of line-width of optical sources on the performance of spectral amplitude coding (SAC) optical code division multiple-access (OCDMA) systems. For a performance analysis we use a symmetric balanced incomplete block design (BIBD) code as the code sequence because we can construct a series of code families by choosing different values of q and m. The ideal BIBD code (m=2) requires narrower line-width than the nonideal BIBD codes when the effective power is large ($P_{sr}=-10dBm$). But the nonideal BIBD codes (m>2) need narrower line-width than the ideal BIBD code when $P_{sr}=-25dBm$.

• Journal of the Korean Society for Library and Information Science
• /
• v.41 no.1
• /
• pp.215-230
• /
• 2007

The study aims at understanding that the precedent information search Patterns of on-line database users compared to non-users have an effect on user satisfaction. The research team analyzed S college students' library system use patterns to evaluate the efficiency of library information services and systems and therefore to diverse factors to improve user satisfaction. The research showed higher satisfaction from on-line system users than non-users. To satisfy user needs the research recommends more devices access methods to information.