• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.17-23
• /
• 1995

Though the magnitude is decreasing, the compressive residual stress is always distributed during fatigue crack growth near the crack tip. This means that the residual stress is released during fatigue crack growth due to the alternative load. ${\Delta}K_{IV}$ is modified by using the initial residual stress and the redistributed residual stress in uniform and various thickness welded specimens. The former is denoted by ${\Delta}K_{IV.eff.i}$ and the latter is denoted by ${\Delta}K_{IV.eff.i}$. ${\Delta}K_{IV.eff.i}$ gives more accurate relations in da/dN vs. ${\Delta}K_{IV}$ curve, however the difference is very small.

• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.283-287
• /
• 1998

구미와 일본에서는 균열이 실린더벽을 과통하므로서 발생되는 일부누설로 인하여 실린더가 불안전 파괴가 이루어진 후 급속파단으로 전개되는 판당전 누설(Leak Before Break, LBB)를 전제로 한 구조건전성의 확인 시험연구가 널리 수행되고 있다. 본고에서는 Gs-C25 실린더의 구조건전성을 LBB개념의 도입과 파괴역할을 이용하여 평가하였다. 내부압력 80bar일때의 실린더에서 응력확대계수 계산은 구조물의응력확대계수가 극단적으로 큰 디멘젼을 지닌 측균열인 경우에서만 재료의 인성계수 $K_{lc}$ /와 $K_{eff}$ 에 도달된다는 것을 나타내었으며, 반면에 원주균열은 파괴 인성치 $K_{lc-}$ 와 $K_{eff-}$ 값까지는 어떠한 경우에도 도달되지 않았다. 구조물의 국부적인 취성파괴는 균열을 함유한 누설로 유도되는 범위에서, "$K_{1}$ 구조물$\geq$$K_{lc}$ 및 $K_{eff}$ "의 조건을 만족시에만 발생되며, 이는 축균열이 원주균열보다 훨씬 더 위험하다는 것을 증명한다.는 것을 증명한다.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.249-262
• /
• 2004

The variations of the dynamical substructures of NGC 6934 have been investigated by means of performing point spread function stellar photometry and the surface photometry on BV CCD images of NGC 6934. Our results show that overall variations of ellipticity and position angle range in $0.02{\sim}0.08\;and\;-90^{\circ}{\sim}+90^{\circ}$, respectively out to three times the half light radius. The inner ($r_{eff}) substructures of NGC 6934 inferred from the variations of ellipticity and position angle are mainly affected by the bright red giant populations, while the effects of the other giant populations are weaker than those of the bright red giant populations. Horizontal branch populations and faint red giant star populations affect the dynamical substructures of NGC 6934 in the region of $r_h.

• Journal of radiological science and technology
• /
• v.25 no.1
• /
• pp.63-71
• /
• 2002

The aim of this study Is to develop a simple and fast method which computes in-vivo doses from transmission doses measured doting patient treatment using an ionization chamber. Energy fluence and the dose that reach the chamber positioned behind the patient is modified by three factors: patient attenuation, inverse square attenuation. and scattering. We adopted a straightforward empirical approach using a phantom transmission factor (PTF) which accounts for the contribution from all three factors. It was done as follows. First of all, the phantom transmission factor was measured as a simple ratio of the chamber reading measured with and without a homogeneous phantom in the radiation beam according to various field sizes($r_p$), phantom to chamber distance($d_g$) and phantom thickness($T_p$). Secondly, we used the concept of effective field to the cases with inhomogeneous phantom (patients) and irregular fields. The effective field size is calculated by finding the field size that produces the same value of PTF to that for the irregular field and/or inhomogeneous phantom. The hypothesis is that the presence of inhomogeneity and irregular field can be accommodated to a certain extent by altering the field size. Thirdly, the center dose at the prescription depth can be computed using the new TMR($r_{p,eff}$) and Sp($r_{p,eff}$) from the effective field size. After that, when TMR(d, $r_{p,eff}$) and SP($r_{p,eff}$) are acquired. the tumor dose is as follows. $$D_{center}=D_t/PTF(d_g,\;T_p){\times}(\frac{SCD}{SAD})^2{\times}BSF(r_o){\times}S_p(r_{p,eff}){\times}TMR(d,\;r_{p,eff})$$ To make certain the accuracy of this method, we checked the accuracy for the following four cases; in cases of regular or irregular field size, inhomogeneous material included, any errors made and clinical situation. The errors were within 2.3% for regular field size, 3.0% irregular field size, 2.4% when inhomogeneous material was included in the phantom, 3.8% for 6 MV when the error was made purposely, 4.7% for 10 MV and 1.8% for the measurement of a patient in clinic. It is considered that this methode can make the quality control for dose at the time of radiation therapy because it is non-invasive that makes possible to measure the doses whenever a patient is given a therapy as well as eliminates the problem for entrance or exit dose measurement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.78-78
• /
• 2009

In this study, multilayer piezoelectric ceramics was manufactured using the PMW-PNN-PZT ceramics. Then, their physical characteristics for applicaton of electric power generation were investigated according to the numbers of multilayer. With increasing the numbers of multilayer, effective electromechanical coupling factor($k_{eff}$) and capacitance were decreased and increased, respectively.

• Journal of The Korean Astronomical Society
• /
• v.17 no.2
• /
• pp.104-114
• /
• 1984

The effective temperatures, $T_{eff}$ (flux) of 52 early type stars are derived from de-reddened monochromatic and integrated fluxes obtained by absolute spectrophotometry, using the method of graphical analysis pioneered by Blackwell and Shallis (1977), similar to that of Underhill (1982) and Tobin (1983). We also estimated the effective temperatures, $T_{eff}$ (comp) of the same stars by comparing their de-reddened energy distributions with those of the LTE model atmospheres by Kurucz (1979). The effective temperatures derived from these two methods are found to be in good agreement, confirming that they are effective for the estimation of effective temperatures of early type stars.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.15-20
• /
• 2004

This paper proposed a very simple method of extracting an effective permittivity from the data of scattering parameters measured on the transmission line of coplanar waveguides in the frequency range of microwave or millimeter waves. This is an extracting method of an effective permittivity $\varepsilon$$_{eff}$ in the case of $\beta$$\ell$ =n$\pi$ (n=integer), where the value of S$_{11}$ changes abruptly following the operating frequency. The experimental value of the effective permittivity $\varepsilon$$_{eff}$ on a dielectric substrate of Rogers 4003$^{TM}$ material of $\varepsilon$$_{r}$ =3.38 showed the value of 2.042, which differs in the error of -3.4% to 8% from those calculated from the previously reported formulae. This result showed that the measurement method was very simple, as well as applied directly to the fabricated circuit patterns, even though the circuit patterns might be complicated or on the substrate of different dielectric materials.s.als.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1292-1296
• /
• 2002

In this paper, a 3-coupled microstrip line tunable bandpass filter has been designed on the basis of a tonductoriFerroelectricfDielectric (CFD) structure. This tunable filter basically exploits the fact that the increase in the bias voltage leads to the reduction of the effective dielectric constant (eon). This reduced $\varepsilon$eff shifts the center frequency (fc) to the higher value. The characteristics of designed filter are as follows; Return loss (RL) is larger than 10 dB; Insertion loss (IL) is les.i than 3.5 dB: 3-dB bandwidth (BW) is less than 1.18 GHz fc can be tuned from 25.4 GHz to 28.8 GHz over the variation of $\varepsilon$eff, from 10 to 13. Therefore, the tunability comes up to 3.4 GHz. The dimension of the filter designed is 7.0 mm ${\times}$ 5.0 nm ${\times}$ 0.5 mm.

• Journal of Korea Multimedia Society
• /
• v.8 no.9
• /
• pp.1282-1291
• /
• 2005

This paper presents the EVM(Embedded Virtual Machine) which enables the execution of dynamic applications loaded in the embedded systems such as Mobile Devices(mobile phone, PDA), Set-Top Box, and Digital TV using downloading techniques. To accomplish this goal, we defined a SIL-(Standard Intermediate Language) code, and implemented a Bytecode-to-SIL translator which enables the execution of programs written in java language in the EVM platform without JVM, and a MSIL--to-SIL- translator which enables for programs written in .NET language to be executed in the EVM platform without .NET platform. Also, we developed a EFF(Executable File Format) builder as an assembler which translates SIL codes into an executable file, *.evm, and implemented the EVM which reads the *.evm file and executes it. The virtual machine for embedded systems developed in this paper is the software technologies that enable the execution of applications or contents without changes to when the platforms change. In fact, the virtual machine suggested here is not only usable as a standard model for existing virtual machines but also aid in more efficient execution of applications loaded in the embedded systems such as Mobile Devices, Digital TV, and Set-Top Box.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.18-24
• /
• 2018

This study proposes a new method of analyzing the burnup credit in boiling water reactor spent fuel assemblies against various operating parameters. The operating parameters under investigation include fuel temperature, axial burnup profile, axial moderator density profile, and control blade usage. In particular, the effects of variations in one and two operating parameters on the curve of effective multiplication factor ($k_{eff}$) versus burnup (B) are, respectively, the so-called single and compound effects. All the calculations were performed using SCALE 6.1 together with the Evaluated Nuclear Data Files, part B (ENDF/B)-VII238-neutron energy group data library. Furthermore, two geometrical models were established based on the General Electric (GE)14 $10{\times}10$ boiling water reactor fuel assembly and the Generic Burnup-Credit (GBC)-68 storage cask. The results revealed that the curves of $k_{eff}$ versus B, due to single and compound effects, can be approximated using a first degree polynomial of B. However, the reactivity deviation (or changes of $k_{eff}$, ${\Delta}k$) in some compound effects was not a summation of the all ${\Delta}k$ resulting from the two associated single effects. This phenomenon is undesirable because it may to some extent affect the precise assessment of burnup credit. In this study, a general formula was thus proposed to express the curves of $k_{eff}$ versus B for both single and compound effects.