• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.299-308
• /
• 2012

To perform patient dose surveys in major interventional radiography procedures as a mean of inter-institutional comparison and of establishing reference dose levels with the ultimate goal of optimizing patient doses in the field of interventional radiography. We reviewed international patient dose survey data in the literature and measured patient dose in major interventional radiography procedures (TACE, AVF, PTBD, TFCA, GDC embolization). ESD(Entrance Skin Dose) was measured using TLD chips attached to the patient skin and ED(Effective Dose) was calculated using angiography unit-derived DAP. A survey of patient dose in interventional radiography procedures were also performed with a questionnaire for interventional radiologists and we proposed a guideline for optimizing patient doses in the field of interventional radiology. The patient dose survey data in interventional radiography procedures were very rare in literature compared with those in diagnostic radiography procedures. In TACE, the mean ED was 25.43 mSv and the mean ESD was 511.75 mGy. The mean ED of TACE was not high, but the cumulative dose should be checked, due to longer procedure TACE. In TFCA, the mean ED was 22.6 mSv and it was relatively high compared with data of other countries. In GDC embolization, the mean ED was not available, because GDC embolization was performed with old Image-Intensifier-type unit and there has no unit-installed ionization chamber. Also, the mean ESD of GDC embolization was up to 2,264 mGy and further studies are needed to calculate the net ED of GDC embolization. Patient dose occurred during interventional radiography procedures are high related with the difficulty of the procedure, fluoroscopy time, the number of angiographies and the treatment protocol. Therefore, continuous education and efforts should be made to optimize the patient dose in the field of interventional radiology.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.887-900
• /
• 2014

This study was conducted to provide a job analysis for, and assess the job performance of horticultural therapists, as well as examine future educational needs. To this end, a chart developed using the DACUM method was chosen as the appropriate tool for the job analysis of horticultural therapists (Study 1). Based on the chart, a survey using an evaluation form was produced to investigate the current level of job performance and future required level of horticultural therapists (Study 2). A total of 8 duties and 45 tasks were classified to examine job performance, based on analysis of the DACUM Council (Study 1). These duties include A. Decide execution organization for horticultural therapy (HT) program, B. Diagnose and assess clients before starting the HT program, C. Plan HT program, D. Develop HT program, E. Prepare to implement HT program for each session, F. Implement HT program for each session, G. Implement overall assessment for HT program, and H. Develop oneself as a horticultural therapist. Their duties were broken down further into five to eight tasks per duty, totaling 45 tasks. Based on the horticultural therapist job performance sheet developed through this process, an assessment of the current job level of horticultural therapists was performed and future required level were examined (Study 2). The evaluation forms were sent to 779 horticultural therapists with level 1 or 2 certification via email or mail delivery. The analysis of 242 questionnaires (31.1%) revealed that horticultural therapists with level 1 certificates have a significantly higher job performance level for 34 of the 45 tasks. Regarding future required level, 20 out of 45 tasks were assessed as higher for level 1 horticultural therapists than level 2. In addition, a Borich formula was utilized to identify the priority of educational needs for the 45 horticultural therapist tasks. The results revealed the following top three tasks: H1. Receive feedback from the supervisor for the horticultural therapy program; A1. Distribute promotional materials about the horticultural therapy program; and H2. Submit a grant proposal for horticultural therapy program to organizations such as welfare foundations. The results of this study are anticipated to facilitate understanding and improve work conditions for current horticultural therapists or horticultural therapists-in-training. In addition, institutions that train horticultural therapists will be able to use this as basic research to develop a practical training curriculum.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.290-294
• /
• 2009

Larval development of Nannopaya pygmaea Rambur (Libellulidae), an endangered dragonfly in Korea, was studied using an introduced lariat population in an artificial wetland habitat. Artificial habitat was created in a green house which imitated a small wetland in Boryeong-si, Chungcheongnam-do, Korea, where N. pygmaea inhabited. A total of 300 N. pygmaea larvae were introduced to the artificial habitat in June 2007. Larvae were recaptured five times between June 2007 and November 2008 for measurement of body length. As a result, the initial and recaptured populations (Recaptured I, II, III, IV, and V populations, respectively) contained two body size groups [initial 6.20$\pm$0.34 mm and 7.94$\pm$0.46 mm (mean$\pm$SD); Recaptured I 2.84$\pm$0.43 mm and 5.16$\pm$0.83 mm; Recaptured II 5.96$\pm$0.66 mm and 8.02$\pm$0.35 mm; Recaptured III 5.97$\pm$0.73 mm and 7.82$\pm$0.37 mm; Recaptured IV 7.04$\pm$0.93 mm and 8.52$\pm$0.39 mm; Recaptured V 5.72$\pm$0.60 mm and 7.71$\pm$0.30 mm]. Our rearing experiment evidenced that the recaptured I-V populations are the offspring of the initial population and the offspring grew approximately 3 mm at 470 degree days. It was also estimated that N. pygmaea larvae need approximately 100 degree days to grow 0.7 mm in body length.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.117-121
• /
• 2007

The number of internet users and the scale of electronic on-line trading are on the increase due to the development of information technology and the internet. The aim of this study was to monitor the accuracy of country-of-origin labels and the indicated contents of meat available by electronic on-line trading by using a structural interview sheet for 100 on-line meat product markets. The result of this investigation showed a 100% level of accuracy for business name and telephone number whereas the company address, meat manufacturer and supplier, and business registration were less reliable. We also investigated the accuracy of site policy, e-mail address, and fax number. The results showed that the accuracy of fax numbers was the lowest. The product name and the kind of meat actually in the product showed a 100% level of conformity, while the price (96.3%), place of origin (93.6%), capacity (90.4%), meat parts (80.9%) and contents of the product (73.4%) showed a relatively low level of conformity. Serious safety issues were exposed by the disturbingly low 20.2% accuracy of indicated expiration dates and 5.3% accuracy of indicated manufacturing dates. To ensure food safety, it is essential to improve consumer understanding and trust regarding food safety through continuous public relations. More education and information are needed to raise consumer awareness of the facts versus myths regarding food safety.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.107-117
• /
• 2004

If doubtlessly contributes much to agriculture and rural development. The roles can be summarized as; 1. to activate rural areas and to provide more comfortable and safe rural life with equivalent services to those in urban areas, facilitating distance education, tole-medicine, remote public services, remote entertainment etc. 2. To initiate new agricultural and rural business such as e-commerce, real estate business for satellite officies, rural tourism and virtual corporation of small-scale farms. 3. To support policy-making and evaluation on optimal farm production, disaster management, effective agro-environmental resource management etc., providing tools such as GIS. 4. To improve farm management and farming technologies by efficient farm management, risk management, effective information or knowledge transfer etc., realizing competitive and sustainable farming with safe products. 5. To provide systems and tools to secure food traceability and reliability that has been an emerging issue concerning farm products since serious contamination such as BSE and chicken flu was detected. 6. To take an important and key role for industrialization of farming or lam business enterprise, combining the above roles.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.290-298
• /
• 1999

A study on the application of impedance phase angle for redox titration, acid-base titration, chelate titration and precipitation titration has been carried out. A constant alternating current was passed between two platinum electrodes. One of them was a polarizable micro-electrode of $0.1cm^2$ or $0.026cm^2$ surface area and the other a non-polarizable large electrode of $1cm^2$ surface area dipped in the solution to be titrated. The impedance and the phase angle of the titration cell were measured with lock-in amplifier to obtain well behaved titration curve respectively. In titration of oxalic acid vs. potassium permanganate, the end-point was obtained successfully from the phase angle titration curve. In this experiment, the concentration of 0.0005 M to 0.05 M, the current of $50{\mu}A$ and the frequency of near 50 Hz were used. In titration of phosphoric acid vs. sodium hydroxide, the first end-point was obtained successfully on the optimum experimental condition of 0.001 M concentration, $50{\mu}A$ current and 25~97 Hz frequency. However, the end-point in titration of cupric sulfate vs. disodium-EDTA couldn't be obtained clearly. The end-point was obtained with the out-of-phase impedance curve on the experimental condition of 0.01 M concentration, $100{\mu}A$ current, 5~35 Hz frequency range. In titration of sodium chloride vs. silver nitrate, the end-point was obtained successfully on the experimental condition of 0.1 M concentration, $100{\mu}A$ current and 5~47 Hz frequency range. This study showed that the impedance phase angle was applicable for the detection of the end-points in redox titration curve, acid-base titration curve, chelate titration curve and precipitation titration curve.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.199-210
• /
• 2004

A new polystyrene-divinylbenzene chelating resin containing 4,5-dihydroxy-naphthalene-2,7-disulfonic acid (chromotropic acid : CTA) as functional group has been synthesized and characterized. The sorption and desorption properties of this chelating resin for Cr(III) ion and Cr(VI) ion including nine metal bloodstain. As a results, FOB test kit could be effectively applied to identification of human blood at chelating resin was stable in acidic and alkaline solution. The Cr(VI) ion is selectively separated from Cr (III) ion at pH 2 and the maximum sorption capacity of Cr(VI) ion is 1.2 mmol/g. In the presence of anions such as $F^-$, $SO{_4}^{2-}$, $CN^-$, $CH_3COO^-$, $NO{_3}^-$, the sorption of Cr(VI) ion was reduced but anions such as $PO{_4}^{3-}$ and $Cl^-$ revealed no interference effect. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 2 was Cr(VI)>Sn(II)>Fe(III)>Cu(II)>Cd(II)${\simeq}Pb(II){\simeq}Cr(III){\simeq}Mn(II){\simeq}Ni(II){\simeq}Al(III)$. Desorption characteristics for Cr(VI) ion was investigated with desorption agents such as $HNO_3$, HCl, and $H_2SO_4$. It was found that the ion showed high desorption efficiency with 3 M HCl. As the result, the chelating resin, XAD-16-CTA was successfully applied to separation and preconcentration of Cr (VI) ion from several metal ions in metal finishing works.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.51-67
• /
• 1996

There are three main rice-growing regions in the United States: the prairie region along the Mississippi River Valley in eastern Arkansas; the Gulf Coast prairie region in southwestern Louisiana and southeastern Texas; and the Central Valley of California. The Central Valley of California is producing about 23% of the US rice(Fig. 1). In California. most of the crop has been produced in the Colusa, Sutter, Butte, Glenn Counties of the Sacramento Valley since 1912, when rice was commercially grown for the first time in the state(Fig. 2). Roughly speaking, the average annual area sown to rice in California is about 300,000 acres to 400,000 acres during the last forty years(Fig. 3). California rice is grown under a Mediterranean climate characterized by warm, dry, clear days, and a long growing season favorable to high photosynthetic rates and high rice yields. The average rice yield per acre is probably higher in California than in any other rice-growing regions of the world(Fig. 4). A dependable supply of irrigation water must be available for a successful rice culture. Most of the irrigation water for California rice comes from the winter rain and snow-fed reservoir of the Sierra Nevada mountain ranges. Less than 10 percent of rice irrigation water is pumped from wells in areas where surface water is not sufficient. It is also essential to have good surface drainage if maximum yields are to be produced. Rice production in California is highly mechanized, requiring only about four hours of labor per acre. Mechanization of rice culture in California includes laser-leveler technology, large tractors, self-propelled combines for harvesting, and aircraft for seeding, pest control, and some fertilization. The principal varieties grown in California are medium-grain japonica types with origins from the cooler rice climates of the northern latitudes (Table 1). Long-grain varieties grown in the American South are not well adapted to California's cooler environment. Nearly all the rice grown recently in California are improved into semidwarf varieties. Choice of variety depends on environment, planting date, quality desired, marketing, and harvesting scheduling. The Rice Experiment Station at Biggs is owned, financed, and administered by the rice industry. The station was established in 1912, as a direct result of the foresight and effort of Charles Edward Chambliss of the United States Department of Agriculture. Now, The station's major effort is the development of improved rice varieties for California.

• Journal of Sensor Science and Technology
• /
• v.11 no.1
• /
• pp.9-17
• /
• 2002

The forming conditions of X-ray storage phosrhors $BaFBr_{1-x}I_x:Eu^{2+}$, $Na^+$ have been investigated, and measured the PSL emission spectra and its intensity, fading characteristics and does dependence of the prepared phosphors. These characteristics were compared with those of commercial image plate (ST-III) obtained from Fuji Photo Film Co. The optimal preparing conditions of $BaFBr_{1-x}I_x:Eu^{2+}$, $Na^+$ Phosphor were 0.5 mol% of $EuF_3$, 4.0 mol% of NaF and composition ratio x=0.3, and the sintering temperature were $950^{\circ}C$ in $H_2$ atmosphere. When the composition ratio x was equal to 0, the spectral range of the luminescence of $BaFBr_{1-x}I_x:Eu^{2+}$, $Na^+$ phosphor was $365{\sim}420\;nm$, and its maximum luminescence intensity appeared at 390 nm. When composition ratio x was not equal to 0, the wavelength ranges and peak of the spectra were shifted to the longer wavelength with the growth of composition ratio x. A good linearity was shown between the PSL intensity and X-ray irradiation dose. The phosphor sample with x=0.3 exhibited better fading characteristics than that of other $BaFBr_{1-x}I_x:Eu^{2+}$ phosphor samples, and the fading characteristics of the PSL intensity at room temperature were shown poorer with increasing $I^-$ ion concentration. The lattice constant of the phosphor becomes larger with increasing the $I^-$ ion concentration.

• Journal of Nutrition and Health
• /
• v.49 no.6
• /
• pp.437-446
• /
• 2016

Purpose: The purpose of this study was to estimate dietary intake of vitamin D and the relationship between serum 25-hydroxyvitamin D (25OHD) concentration and bone mineral density (BMD) in Korean adults using the 2011 data from the Korea National Health and Nutrition Examination Survey. Methods: Daily intake of vitamin D and ratio of subjects that consumed less vitamin D than adequate intake (AI) were estimated in 4,879 Korean adults. The relationship between daily intake of vitamin D and serum 25OHD and BMD were analyzed. Results: Average daily intakes of vitamin D were $3.84{\pm}0.23{\mu}g/day$ for men and $2.22{\pm}0.11{\mu}g/day$ for women. Approximately 72~97% of men and 80~99% of women consumed less than the AI of vitamin D for Koreans. Serum 25OHD concentration increased with age, and the ratios of serum vitamin D deficiency (< 20 ng/mL) were 47.8~81.1% for men and 59.4~92.8% for women. Average intake of vitamin D was higher in subjects aged < 50 yr than in those ${\geq}50yr$, but lower in serum 25OHD concentration. In subjects aged < 50 yr, serum 25OHD was higher in subjects that consumed $10{\mu}g/day$ of vitamin D than in those that consumed less than $5{\mu}g/day$. In female subjects aged ${\geq}50yr$, average intake of vitamin D was associated with higher bone mineral density. Conclusion: It was found that dietary intake of vitamin D could increase serum 25OHD concentration in young adults and bone mineral density in old women. Therefore, nutrition policies for enriched foods with vitamin D and nutrition education to consume more vitamin D-rich foods are needed to ameliorate vitamin D status of the Korean population. Adequate intake for Korean population aged < 50 yr might be adjusted upwardly up to $10{\mu}g/day$.