• 한국해양공학회지
• /
• 제10권2호
• /
• pp.35-41
• /
• 1996

This paper is aimed to solve local buckling problem that can frequently occur when the high speed ship's hull of sandwich structural type is crushed by rarbour and cargo. Experiment is performed on 36 specimens cut of 4-plates that made of sandwich type(Kevlar-Epoxy, Klegecell foam) and 16-Edgewise compressive test specimen, 16-Flatwise test specimen were tested by A.S.T.M. test method. The result of this study is analyzed and compared in test method and test jig to perorm Edgewise compressive test and Flatwise test.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.52-57
• /
• 2007

Corrugated fiberboard is a representative packaging material because of high compressive strength and stiffness in spite of light weight. The flutes of corrugated fiberboard are various depending on the height and the number per unit length of flute. The corrugated fiberboard with microflute like E, F or G with low height less than 1.5 mm has developed. Because it has some advantages including higher stiffness and lower requirement of fiber than carton board, it has a possibility to replace folding box board. Its consumption has been increased with the various applications like graphic packaging. As microflute has the different geometry from other conventional flutes, it can show the different behavior in testing and it may require a new testing method. In this study, we evaluated the edgewise compressive strength of the corrugated fiberboard with microflute according to ISO and other standard test methods. And the effect of specimen shape and platen compression rate was examined. From this study, we found that ISO methods was suitable and reasonable methods for corrugated fiberboard with microflute.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.69-75
• /
• 1999

This study was performed to investigated the application of mixed resins for corrugated container board. The corrugated container board yields a sandwich structure in which a linerboard material is glued to a corrugated medium . Now, manufacturing corrugated container boards don't provide sufficient strength, and result in box failure during shipping . Therefore improvement of box strength is necessary . In this study, we intend to improve box strength by improving corrugated medium strength with mixed resins and to find the optimum treatment condition of this resins. First, we tried to mixed resins as Starch+CMC, Starch_Irea, CMC+Urea, Second, investigated to applicability of this resins for corrugated medium , and the third, measured tensile index, burst index, and edgewise compression index on liner, medium paper, and single faced corrugated container board. In this test results, we obtained that the improvement ratios of tensile index in liner and medium paper were approximately 80-185%, 60-118% , respectively. The respecting improvement ratios of edgewise compression index of single faced corrugated container board was approximately 91-124%, relatively. In addition, we concluded that optimum condition in mixing ratio was 1 :3 with CMC + Urea and the ap[plication amounts was 9% on materials. Fro manufacture of corrugated container board, optimum condition in mixing ratio was 1 : 3 with 5% CMC +Urea , because of considering to improvement of strength on cost.

• 한국포장학회지
• /
• 제28권1호
• /
• pp.55-66
• /
• 2022

In this study, forty corrugated fiberboard (CF) boxes for fresh produce were collected from farms located in Gyeongsan city and evaluated its characterizations and physical properties according to Korean Standard (KS). The basis weight, flute, and paperboard combination were determined for the characterizations of CF boxes. The measured basis weights of all samples were within the tolerance limit referred to KS and the flutes were B/F, EB/F, and AB/F flute, respectively. The bursting strength (BS), edgewise crush resistance (ECR), and compression strength (CS) were tested to evaluate the physical properties. There are four single-walled (SW) CF boxes showed BS and ECR higher than 638 kPa and 3.30 kN/m, respectively. One SW CF boxes showed BS and ECR higher than 785 kPa and 3.43 kN/m, respectively. In case of double-walled (DW) CF boxes, sixteen CF boxes showed BS and ECR higher than 785 kPa, 4.96 kN/m (AB flute), or 4.90 (EB flute), respectively. The other nineteen CF boxes showed BS and ECR higher than 981 kPa, 5.29 kN/m (AB flute), or 5.20 (EB flute), respectively. All the CF boxes except two samples showed the acceptable compression strength in reference to the guideline of KS.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.47-53
• /
• 1999

The effect of coating of liner components with oxidized starch on the properties of corrugated box was examined . Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) , and corrugated box was made from the treated corrugated board. Box was made in a regular slotted container (RSC) style, and box compression strength was determined in the direction of top-to-bottom compression. The compression strength of box coated on outside liner component showed 15.4% improvement for 1.58g㎡ coating. On the other hand, the strength of box coated on outside liner component showed only 1.45% improvement for 1.41g/㎡ coating and 3.46% improvement for 2.32g/㎡ coating. Coating on inside liner component with oxidized starch at low coating weight more significantly improved box compression strength than coating on outside liner component, and the improvement was marked at the coating weight of 1.5-2.5g/㎡. In estimating top-to-bottom box compression strength, the experimental values were closer to the calculated values from McKee's equation suing edgewise compression strength of the combined board measured by column crush test than those from Kellicutt's equation using compression strength of component paperboards measured by ring crush test.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 하계 학술대회 논문집
• /
• pp.347-352
• /
• 2003

농산물 포장화물의 경우 농산물의 손상은 겉포장 상자의 파손에 의한 압상이 주요 원인이다. 따라서 농산물 상자의 경우 압축강도를 특히 중요시 여기고 있으며, 한국산업규격을 비롯해 각종 농산물 관련 규정에서는 압축강도에 의한 상자의 품질관리를 규정화 하고 있다. 골판지 상자의 압축강도는 원단인 골판지의 구성 원지들(라이너, 골심지)의 품질과 이들의 구성 형태 및 상자의 외형 치수 비율에 따라 결정되므로, 원지의 링크라쉬(ring crush), 원단의 수직압축강도(edgewise compression strength)를 통해 상자의 압출강도를 관리하는 것이 보통이다. 또한 골판지 상자는 제작 후 유통 과정을 거치면서, 여러 요인에 의해 압축강도가 현격하게 저하되는데, 이중 수분 흡습에 의한 강도저하와 장기 누적하중, 진동 및 충격 등의 피로로 인한 강도 저하가 가장 크다. 여러 산업 분야에서 골판지 상자의 견고성 문제는 물품의 내수 및 수출시 제품에 대한 신뢰성 확보와 기업의 이미지 제고와 직결되는 중요한 사항이다. 특히, 세계 각 국의 농산물 시장이 개방됨에 따라 우리나라 농산물의 수출도 확대될 전망이고 또한 마땅한 대체재가 개발되지 않는 한 골판지 상자의 이용은 날로 증가될 것으로 전망된다. 따라서 골판지 상자의 압축강도와 내구성 향상에 대한 다각적인 연구가 절실하다. (중략)

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1089-1096
• /
• 2005

This study was experimental test of edgewise compression properties for aluminum(type-50XX) sandwich panel with thermal environment and surface treatment using adhesive film. There was decreasing $10\%-peel$ strength after thermal environment. Through compressive. buckling mode know to seen of properties of adhesive, sheet and core strength. First case of Chromate to aluminum sheet, know low shear strength of adhesive through buckling mode but case of Beomite to aluminum sheet, know than thin sheet and core low strength through buckling mode.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.416-427
• /
• 1998

Unidirectional commingled-yarn-based carbon fiber(CF)/polyamide(PA) 6 composite was fabricated under molding pressures of 0.4, 0.6 and 1.0 MPa to study its flexural deformation and fracture behavior. Fiber/matrix interfacial bonding area became larger with an increase of molding pressure from 0.4 to 0.6 MPa. For molding pressures .geq. 0.6 MPa, good flexural performance of similar magnitudes was attained. For the fracture test, four kinds of notch direction were adopted : edgewise notches parallel (L) and transverse (T) to the major direction of fiber bundles, and flatwise notches parallel(ZL) and perpendicular(ZT) to this direction. Nominal bend strength for L and ZL specimens exhibited high sensitivity to notching. ZL specimens revealed the lowest values of the critical stress intensity factor $K_c$ which was slightly superior to those of unfilled PA6 matrix. Enlargement of the compression area for T specimens was analyzed by means of the rigidity reduction resulting from the fracture occurrence.

• Journal of Biosystems Engineering
• /
• 제28권2호
• /
• pp.127-136
• /
• 2003

The top-to-bottom compression strength of corrugated board box is the most important mode of loading during it's no, and it depends largely on the edgewise compression strength of the corrugated board in the cross-machine direction and to a considerable extent on the flexural stiffness in both principal directions (CD; cross-machine direction, MD; machine direction) of the corrugated board. Corrugated board is a sandwich structure with an orthotropic property. The purpose of this study was to elucidate the principal design parameters for board combination of corrugated board from the viewpoint of bending strength through the finite element analysis [FEA] fur the various corrugated board. In general, the flexural stiffness [FS] in the MD was 2-3 times larger than that in the CD, and the effect of liner for the FS of corrugated board was much bigger than that of corrugating medium. The flexural stiffness index [FSI] was high when the stiffness of liner was in the order of inner, outer, and middle liner in double-wall corrugated board [DW], and the effect of the stiffness arrangement or itself reinforcement of corrugating medium on the FSI was not high. In single-wall corrugated board [SW] with DW. the variation of FSI with itself stiffness reinforcement of liner was much bigger than that with stiffness arrangement of liner. The highest FSI was at the ratio of about 2:1:2 for basis weight distribution of outer, middle, and inner liner if the stiffness of liner and total basis weight of corrugated board were equal in DW Secondarily. basis weight was in the order of inner, outer, and middle liner. However, the variation of FSI with basis weight distribution between liner and corrugating medium was much bigger than that with itself basis weight distribution ratio of liner and corrugating medium respectively in both DW and SW. md the FSI was high as more total basis weight was divided into liner. These phenomena fur board combination of corrugated board based on the FEA were well verified by experimental investigation.

• 한국포장학회지
• /
• 제4권2호
• /
• pp.3-11
• /
• 1998

산화전분을 골판지 구성원지인 표면라이너지와 이면라이너지에 각각 코팅하였으며 산화전분 코팅에 따른 골판지의 물성변화를 조사, 산화전분 코팅의 효과를 분석한 결과는 다음과 같았다. 산화전분의 코팅에 의해 골판지의 수직압축강도 뿐만아니라 파열강도도 동시에 개선될 수 있었다. 골판지의 파열강도는 구성 라이너지의 처리면에 관계없이 일정수준의 도공량에 도달할 때까지 크게 증가하다가 그 이상에서는 더 이상의 증가를 보이지 않았다. 표면라이너지에 처리한 골판지의 경우 도공하지 않은 골판지의 파열강도에 비해 도공량이 $2.32g/m^2$일 때 30.3%가 증가하였고 이면라이너지에 처리한 경우 도공량이 $4.84g/m^2$일 때 36.8%가 증가하였으며 표면라이너지와 이면라이너지 모두 처리한 경우 도공량이 $7.16g/m^2$일 때 39.9%가 증가하였다. 산화전분의 코팅은 골판지 원지의 섬유간 결합을 증가시키는데 기여하고 강직성을 개선시켜 골판지 수직압축강도의 개선을 가져왔다. 구성 라이너지의 처리면에 관계없이 골판지의 수직압축강도는 산화전분 도공에 의해 전반적으로 증가하였는데, 이면 라이너지에 처리한 경우 도공량이 $1.58g/m^2$일 때 11.3%가 증가하였고, 표면라이너지와 이면라이너지 모두 처리한 경우 도공량이 $2.99g/m^2$일 때 11.9%가 증가되어 소량의 산화전분 도공에 의해서도 수직압축강도가 크게 개선되었다.