• 제목/요약/키워드: Edge-to-edge repair

검색결과 77건 처리시간 0.021초

석암리 9호분 출토 금제띠고리의 제작 방법 고찰 (A Study of Metalworking Techniques Seen in the Gold Buckle from Seogam-ri Tomb No. 9)

  • 노지현;유혜선
    • 박물관보존과학
    • /
    • 제17권
    • /
    • pp.1-16
    • /
    • 2016
  • 석암리 9호분 출토 금제띠고리(국보 제189호)는 한반도에서 출토된 가장 이른 시기의 누금세공품으로 금 순도 약 22.8K의 금판에 타출기법으로 일곱 마리의 용이 표현되어 있다. 그리고 약 23.8K의 금선과 금알갱이로 용의 몸통 및 윤곽선, 테두리 등이 장식되어 있다. 이 금제띠고리 곡선면의 일부에는 순도 23.8K의 금판이 덧대어져 있는데, 제작 당시 혹은 그 이후에 발생된 결함을 보완하기 위한 것으로 추정되었다. 금제띠고리에 장식된 용의 코를 표현하는데 사용된 금선은 순도가 23.3K로 약간 낮았다. 이는 동그랗게 감아 말아 만든 용의 코 모양이 잘 유지될 수 있도록 순도가 약간 낮은 금선을 사용하여 경도를 조금 높인 것으로 추정된다. 금알갱이는 크기에 따라 대, 중, 소로 구분되었으며 구리 확산법을 이용하여 접합한 것으로 추정되었다. 용의 이마 및 몸통을 장식하기 위하여 청색 터키석을 감입하였고, 일곱 마리 용의 눈 부분에는 적색 안료인 진사/주(HgS)가 감입되었음을 확인하였다.

원통형 탈황설비 정비용 비계 연구개발 (Research & Development on the Scaffolding for Cylindrical Desulfurizers Facility Maintenance)

  • 이광길;김우곤;엄석호;강철민;강정기;오철석;서주식;김경재;박종인;장몽룡;김무성;김대년;정수호
    • 대한안전경영과학회지
    • /
    • 제22권3호
    • /
    • pp.1-8
    • /
    • 2020
  • The desulfurizers facility is cylindrical shape. To operate properly it needs nozzles cleaned, get rid of lime adhesion and sludge, repair the wear and corrosion of facility regularly. For this purpose, workers shall access the ceiling or vertical wall at high place. Ordinary scaffoldings such as steel pipe scaffolding or system scaffolding have been using so that workers can access them. With these ordinary scaffoldings, openings around cylindrical wall are inevitable which make workers can expose always to the risk of falling. The purpose of this study is to develop customized scaffolding to minimize the openings to prevent workers form falling during maintenance it. It consists of a hexagonal central tower and six trapezoidal outer towers. And the bracing among the towers have connected each other for self-standing and for maintaining the structure of towers. Span decks, the circumference footstools, steps, etc. are laid on each floor. The safety is reviewed by structural analysis and performance test. With this study, openings each floor of this scaffold are removed. The gap between the cylindrical wall and the edge of the work stage is approximately 100 mm. Therefore, we expect that workers can work safely and efficiently.

Transcriptional Profiling of Differentially Expressed Genes in Porcine Satellite Cell

  • Jeong, Jin Young;Kim, Jang Mi;Rajesh, Ramanna Valmiki;Suresh, Sekar;Jang, Gul Won;Lee, Kyung-Tai;Kim, Tae Hun;Park, Mina;Jeong, Hak Jae;Kim, Kyung Woon;Cho, Yong Min;Lee, Hyun-Jeong
    • Reproductive and Developmental Biology
    • /
    • 제37권4호
    • /
    • pp.233-245
    • /
    • 2013
  • Muscle satellite cell (SC) is responsible for postnatal muscle growth, repair, and regeneration. Satellite cell is an important source of multi-potent stem cell process and differentiation into adipogenic, myogenic, and osteoblastogenic. The objective of this study was to identify alter of transcriptome during differentiation in porcine satellite cell and to elevated transcriptome at different stages of postnatal development to gain insight into the differences in differentiated PSC. We used RNA-seq technique to investigate the transcriptomes during differentiation in pig muscle. Sequence reads were obtained from Illumina HiSeq2000. Differentially expressed genes (DEG) were detected by EdgeR. Gene ontology (GO) terms are powerful tool for unification among representation genes or products. In study of GO biological terms, functional annotation clustering involved in cell cycle, apoptosis, extracellular matrix, phosphorylation, proteolysis, and cell signaling in differences stage. Taken together, these results would be contributed to a better understanding of muscle biology and processes underlying differentiation. Our results suggest that the source of DEGs could be better understanding of the mechanism of muscle differentiation and transdifferentiation.

골안정성 결손을 가진 Bankart 병변에 대한 경 골-유사 교량형 봉합술식 - 술기 보고 - (A Suture Bridge Transosseous-Equivalent Technique for Bankart Lesions with Deficient Bony Stability - Technical Note -)

  • 최창혁;김신근;장일웅;채승범
    • 대한관절경학회지
    • /
    • 제13권2호
    • /
    • pp.179-182
    • /
    • 2009
  • 목적: Bankart병변에서 봉합나사못을 이용한 관절경적 치료는 관절와 가장자리에 점고정(point fixation)을 하여, 관절와 골 결손시에 적절한 부착부 족문(foot print)치유를 이루지 못한다는 한계점이 있다. 이에 본 저자들은 골성 Bankart병변에서 나사못 고정으로 인한 점접촉의 단점을 피하고 관절순의 교차압박을 통해 기계적 안정성을 개선시킬수 있는 경골-유사 교량형 봉합술식을 소개하고자 한다. 수술 술기: 본 술식은 교량형 봉합술식을 통한 경 골-유사 회전근개 봉합술에서 응용되었으며, 이는 부착부 족문과 건 사이 평균압력과 압력이 가해지는 접촉면적을 개선시킨다. 골성 Bankart 병변의 경우 관절와 부착부의 돌출된 골병변은 제거하거나 다듬어주며, 골편이 가동성이 있는 경우 관절순과 함께 분리시킨다. 이후 2개의 나사못(3.0 mm Biofastak, $Arthrex^{(R)}$, Naples, FL)을 골성 Bankart병변 위, 아래 부위의 내측 연에 삽입한다. 관절와를 적당한 두께로 덮을수 있도록 하 상완관절와인대 부근 관절낭순의 내측에 봉합갈고리를 이용하여 봉합사를 각각 통과시켜 mattress봉합을 시행한다. 교량형 봉합을 위해서, 전방 관절와연의 관절측 가장자리에 3.5 mm pushloc 나사못 ($Arthrex^{(R)}$, Naples, FL) 구멍을 만든 후 먼저 원위 교량형 봉합을 시행하고, 이어 근위 교량형 봉합을 시행함으로써 근위방향으로 관절순을 가동시킬 수 있다. 본 술식은 나사못 고정으로 인한 점 접촉의 기술적 단점을 피하고 관절순 교차압박을 통해 간격형성을 감소시킬수 있는 이점이 있다.

  • PDF

설상절제술(triangular resection)을 사용한 대동맥판막 성형술의 단기 성적 (Aortic Valvuloplasty Using Triangular Resection lechniolue)

  • 김욱성;정철현;허재학;백만종;이석기;박영관;김종환;장우익;장지민
    • Journal of Chest Surgery
    • /
    • 제35권2호
    • /
    • pp.113-117
    • /
    • 2002
  • 기계판막이나 조직판막을 이용한 인공판막 치환술의 한계가 인식되면서부터 대동맥판막 성형술은 판막치환술의 대안으로 관심을 끌어왔다. 대상 및 방법: 1999년 7월부터 2000년 7월까지 대동맥판막 폐쇄부전으로 설상절제술(triangular resection)을 시행 받은 8명의 환자를 대상으로 수술합병증 및 수술 전후의 심초음파 소견을 비교하였다. 8례 중 남자와 여자는 각자 4명이었으며, 평균 연령은 18.4$\pm$12.6세였다. 술전 시행한 심초음파검사에서 대동맥판막 폐쇄부전의 정도는 평균 3.570.5였다. 6례에서는 심실중격결손증을 동반한 삼첨판인 대동맥판막이었고, 2례에서는 이첨판이었다. 수술방법은 탈출된 판엽을 nodule of Arantius를 중심으로 다른 엽보다 길어진 만큼 설상절제하고 교련술을 시행하였다. 이첨판인 경우는 raphe를 제거하였다. 결과: 기사망이나 합병증은 발생하지 않았다. 평균 추적기간은 11.9$\pm$3.6개월이었으며, 술후 항응고제는 사용되지 않았다. 수술전, 퇴원전 그리고 마지막 추적 검사시 시행한 심초음파검사에 의한 대동맥판막 폐쇄부전의 정도는 각각 grade 3.5$\pm$0.6, grade 0.6$\pm$0.5 그리고 grade 0.8$\pm$0.6으로 통계적으로 유의하게 감소하였다(p value=0.01). 마지막 추적검사에서의 대동맥판막 폐쇄부전의 정도는 grade 2가 1명이였고, 나머지 환자들에서는 grade 1이거나 경도 미만한 정도였다. 결론: 설상절제술은 만족할만한 조기결과를 보여주지만,오랜 기간의 추적검사가 필요하리라 본다.

중수기 및 발굴 자료로 본 상주 양진당의 배치에 관한 연구 (A Study on the Arrangements of YangjinDang in Sang-ju Foundation by Date on the Excavation and Jungsuki)

  • 김찬영;정명섭
    • 건축역사연구
    • /
    • 제20권4호
    • /
    • pp.61-80
    • /
    • 2011
  • This study estimated the prototype of Yangjindang at the time of its foundation by putting together the literature and discovered data and historical research on family related to Sangju Yangjindang, and looked at its architectural characteristics. These are summarized as follows: First, Yangjindang is an office building which was completed in three years [1629] after its start of construction when Keomgan Jojeong was at the age of 72 [1626] in his latter days and it was used for performing ancestral rites for Jojeong's forefathers of the head family of Pungyang Jo by family origin. Yangjindang was founded as a base of utopia for putting ancestral rites & commemoration, harmoniousness of a tribe, and educational idea into practice together with Ojakdang. Such a movement can be judged to interpret and apply the circumstances of the times realistically and flexibly where they tried to pursue the promotion of Confucianism & studies of the proprieties as well as the consciousness of practice, and to bring a tribe into harmony after the war through the retirement of Toegye School. Second, it is located at a topographically ideal spot on the edge of the Jangcheon-a tributary of Nakdong with a good physiology and landscape and its location was also the lot for a house of Jojeong's ancestor, which was burned down by war. Behind such a location and planning of Yangjindang, it is presumed, though not certain that it was modelled after Naeap village at Andong- Jojeong's parents-in-low's home. Third, as for its foundation size, it's a head house as much as about more than 100-kan, and its structure is composed of Samyo, Bonche, and Yangjindang. In addition, arrangements of buildings and its composition system and renovation procedures followed Chu-tzu Garyoe. Composition of Samyo can be restored to Yangjindang, Jugo, Woesammun, and Samyo; however, there has been no case of existence in case of Jugo building composition & arrangement takes on an aspect of a compromise between Gamyojido and Sandangjido of Garoe, which seems to be the result from flexibly interpreting and applying the rituals and studies of the proprieties of Toegye School in keeping with locational topography and realistic circumstances while making it a principle for them to observe by Toegye School. There exists a difference between Bonche and its counterpart of the upper class housing at Sangju district in that Bonche[main building] is a squre-shaped 'Ttuljip' typical of Andong setting a family ancestral ritual as a main function. Fourth, there existed a lot of hardships in raising money to cover repairs in time of doing repairs to this structure after 180 years since its establishment. In case of the repair work on Bonche, the level of renovation was limited to the replacement of old materials for rafters, doorpost, roof members and railings with new materials, together with partial alterations in case of window system. It is estimated that Yangjindang was renovated in 1808, and afterwards it was renamed Okryujeong after being re-built at another site. Through the repairs, the floor was expanded for the clan's meeting, and angle rafters and roof members were mended as well. Especially, the plane and structure of Okryujeong which was re-built at another site are expected to give clues to its restoration due to the resemblance to original appearance of Yangjindang at the time of its renovation in 1808.

합각지붕 사찰 주불전의 규모에 따른 기둥 및 처마부 관계분석 연구 (Properties of Components for the Dapogye of Hipped and Gable Roof Wooden Buildings)

  • 고정주;이정수
    • 한국산학기술학회논문지
    • /
    • 제15권5호
    • /
    • pp.3192-3202
    • /
    • 2014
  • 본 연구는 국가지정문화재로 지정된 목조건축물 중 합각지붕 형식을 가지고 있는 사찰의 주불전 32동을 대상으로 규모에 따라 규모별 구성요소의 구체적 특성을 분석하고, 주요 부재 상호간 미치는 영향이나 비례관계 등을 분석하여 향후 문화재 복원 및 보수를 위한 객관적인 기초자료를 제공하는데 목적으로 하고 있다. 연구 결과는 다음과 같다. 첫째, 평면비례는 3칸 건축물에서 도리통(전면)과 양통(측면)의 평균비례는 1.31:1 정도이며, 5칸 건축물 평균비례는 1.70:1로 이루어져 있다. 둘째, 주칸비례 및 위치별 기둥 굵기를 분석한 결과, 3칸 및 5칸 건축물 모두 어칸이 퇴칸이나 협칸에 비해 주칸을 넓게 형성한 것으로 나타났다. 또한 3칸 건축물 평균 기둥 굵기는 귀기둥 491mm, 평주 433mm 정도이며, 5칸 건축물에서는 귀기둥 595mm, 평주 511mm 정도의 굵기로 분석되었다. 귀기둥 굵기가 평주보다 평균 60mm~80mm정도 굵게 이루어진 것은 구조적인 안정성과 착시현상을 고려한 것으로 판단된다. 셋째, 건물규모(면적)에 따른 기둥 굵기, 처마 내밀기, 차마높이에 미치는 영향을 분석한 결과, 3칸 건축물에서는 건물규모(면적)가 큰 건물일수록 크게 나타나는 상관관계를 갖고 있는 것으로 나타났으나, 5칸 건축물에서는 건물규모(면적)에 크게 영향을 받지 않는 것으로 분석되었다. 넷째, 기둥과 처마와의 관계 분석 결과, 3칸 건축물과 5칸 건축물에서 모두 기둥 길이가 긴 건물일수록 처마높이와 처마 내밀기를 크게 둔 것으로 나타났으며, 특히 처마높이는 기둥 길이와 아주 밀접한 상관관계를 가지고 있는 것으로 분석되었다. 또한 3칸 건축물과 5칸 건축물에서 모두 처마 내밀기가 큰 건물일수록 처마높이도 높게 형성된 것으로 분석되었다.