• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4220-4225
• /
• 2022

Monte Carlo (MC) simulations are increasingly being used as an alternative or supplement to the gamma spectrometric method in determining the full energy peak efficiency (FEPE) necessary for radionuclide identification and quantification. The MC method is more advantageous than the experimental method in terms of both cost and time. Experimental calibration with standard sources is difficult, especially for specimens with unusually shaped geometries. However, with MC, efficiency values can be obtained by modeling the geometry as desired without using any calibration source. Modeling the detector with the correct parameters is critical in the MC method. These parameters given to the user by the manufacturer are especially the dimensions of the crystal and its front edge, the thickness of the dead layer, dimensions, and materials of the detector components. This study aimed to investigate the effect of the front edge geometry of the detector crystal on efficiency, so the effect of rounded and sharp modeled front edges on the FEPE was investigated for <300 keV with three different HPGe detectors in point and volume source geometries using PHITS MC code. All results showed that the crystal should be modeled as a rounded edge, especially for gamma-ray energies below 100 keV.

• Journal of Korea Multimedia Society
• /
• v.23 no.10
• /
• pp.1258-1269
• /
• 2020

The IoT(Internet of Things) service provides users with valuable services by collecting and analyzing data using Internet-connected IoT devices. Currently, IoT service platforms are accomplished by using edge computing to reduce the delay time required to collect data from IoT devices. However, if a user moves to another network with IoT device, the connection will be lost and IoT service will be suspended. To solve this problem, we proposes a service that automatically roaming IoT service when IoT device makes move. IoT roaming service provides a device automatic tracking management technique designed to continue receiving IoT services even if users move to other networks. To check if the proposed roaming service was effective, we implemented IoT roaming service and measured the data transfer time while move between networks along with devices while using IoT service. As a result, the average data transfer time was 124.62ms, and the average service interrupt time was 812.12ms. with this result, we can assume that the user could feel service interruption time very shortly and it will not affect the service experience. with IoT roaming service, we expect that it will present a method that stably providing IoT services even if user moves networks.

• Review of Korean Society for Internet Information
• /
• v.14 no.3
• /
• pp.5-20
• /
• 2013

ICANN has been governing the Domain Name System(DNS) "technically" since 1998. The architecture is called Internet Governance, and it brings about many different discourses; "What does that govern?", "Who delegate its role to ICANN?"," How could the regime ensure fairness?" etc. This article will analyze on Internet Governance by applying the government approach of Foucault, and try to compare two parts, the 'core' and the 'edge' of Internet Governance for method. Whereas the 'core' of it refers the site that be governed by the formal contract directly, the 'edge' as the rest of it means informal friendly relations with ICANN. The 'core' rule was stemmed from technological community such as IAB or IETF historically. They had invented new world and its population to integrate the technical order as protocol and the semiotic order as language, that be based on new government mode. On the other hand, ".KR" domain, one of the 'edges', has been evolved into more heterogeneous system, through contest and conflict between traditional state and Internet Governance. The governed object of ".KR" domain is situated in the crossing of each other the 'protocol user', the 'language-semiotic user' and the' geographical resident'. Here the 'geographical resident' rule was weird for DNS, so that shows the internal lack of Internet Governance. It needs to move to the concept of 'Hangeul(Korean-language) user' rather than the 'geographical resident'.

• Journal of Fashion Business
• /
• v.26 no.5
• /
• pp.135-152
• /
• 2022

This study aimed to evaluate the user experience of hearable devices for seniors and suggest possible development directions. A literature review, case study, and in-depth interviews were conducted. Based on the literature review, convenience, accessibility, transmissibility, wearability, aesthetics, and interest were determined as the user experience factors of hearable devices. Then, in-depth interviews were conducted with 12 participants aged 60 or older regarding four devices. Participants tried four different types of wireless earphones which were selected based on a case study: open-type, kernel-type, neckband-type, and earring-type. Regarding convenience, the participants preferred to carry small devices and regarding accessibility, participants responded positively for most product types. For transmissibility and wearability, there were differences depending on whether devices were put on correctly, but the participants preferred products that did not wholly block external sounds. For aesthetics, participants preferred small and cutting-edge designs. Interest was noticeable among those who had not used the devices before, and for stability, the neckband-type was the most preferred. Based on the results we suggest designing small cutting-edge designs and button-type assist devices, not blocking the external sound, providing a participation program, simplifying device functions, and establishing a method that can be combined with and stored in clothes and a delivery method that can signal danger.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.650-669
• /
• 2017

Coordinated multiple points transmission and reception (CoMP) technology is used to mitigate the inter-cell interference, and increase cell average user normalized throughput and cell edge user normalized throughput. There are two kinds of radio resource schedule strategies in LTE-A/5G CoMP system, and they are called centralized scheduling strategy and distributed scheduling strategy. The regional centralized scheduling cannot solve interference of inter-region, and the distributed scheduling leads to worse efficiency in the utilize of resources. In this paper, a novel distributed scheduling scheme named 9-Cell alternate authorization (9-CAA) is proposed. In our scheme, time-domain resources are divided orthogonally by coloring theory for inter-region cooperation in 9-Cell scenario [6]. Then, we provide a formula based on 0-1 integer programming to get chromatic number in 9-CAA. Moreover, a feasible optimal chromatic number search algorithm named CNS-9CAA is proposed. In addition, this scheme is expanded to 3-Cell scenario, and name it 3-Cell alternate authorization (3-CAA). At last, simulation results indicate that 9/3-CAA scheme exceed All CU CoMP, 9/3C CU CoMP and DLC resource scheduling scheme in cell average user normalized throughput. Especially, compared with the non-CoMP scheme as a benchmark, the 9-CAA and 3-CAA have improved the edge user normalized throughput by 17.2% and 13.0% respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.5
• /
• pp.61-68
• /
• 2021

In this paper, we propose an edge computing-based exercise data collection device that can be provided for exercise rehabilitation services. In the existing cloud computing method, when the number of users increases, the throughput of the data center increases, causing a lot of delay. In this paper, we design and implement a device that measures and estimates the position of keypoints of body joints for movement information collected by a 3D camera from the user's side using edge computing and transmits them to the server. This can build a seamless information collection environment without load on the cloud system. The results of this study can be utilized in a personalized rehabilitation exercise coaching system through IoT and edge computing technologies for various users who want exercise rehabilitation.

• Korean Journal of Environment and Ecology
• /
• v.1 no.1
• /
• pp.35-45
• /
• 1987

To survey trail damage and vegetational change around trail at Bukhan Mountain National Park in Korea, field survey was executed over Bukhan mountain district during August, 1987. Trail damage was surveyed for he section of 7.18km from Ui valley to Jeongnung valley in which user's density was high. Ground vegetation was surveyed with a belt-transect method from trail edge to forest and edge species were surveyed with a belt method along trail edge. Interrelation between trail damage and user's density was not dear. Damage class II of trail showed 23.9% of the surveyed section and class III showed 8.0% and class II and III of natural trail showed 19.7% and those of facilitated trail showed 12.3%. The length of damage class II and III requiring readjustment were estimated as 3.65 km and 1.22km from the main trail course of 15.3km at Bukhan mountain district. In case of no intervention to forest by users, vegetational change around trails was appeared up to 6-8 m from trailside. But in case of intervention to forest by users, vegetational change was not coincident with the change of soil hardness and was diverse locally. Quercus mongolica, Lespedeza cyrtobotrya and Rbo-dodendron mucronulatum were appeared as Raunkiaer frequency class E, and Weigela subsessilis. Lespedeza maximowiczii, Rhododendron schlippenbachii and Sorbus alnifolid were appeared as class D at trail edge of ridge-Quercus mongolica was appeared as class E and Rhododenderon mucrounulatium. Stephanandra incisa were appeared as class D at trail edge of midslope. Rhododenron mucronulatum. Lespedeza maximowiczii and Stepanandra incisa were appeared as class D at trail edge of valley. Lespedeza cyrtobotrya. Lespedeza maximowiczii and Stephanandra incisa were appeared as class D at trail edge of valley beside motorway.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.145-148
• /
• 2002

A study on image searching and management techniques is actively developed by user requirements for multimedia information that are existing as images, audios, texts data from various information processing devices. We had been studied an automatical shape region segmentation method using color. distribution and edge characteristics of moving images for. contents-base description. The Proposed method uses a color information quantized on human visual system and extracts overlapped regions to be matched by using edge characteristics of the image frame. The performance of the proposed method is represented by similarity for comparison to a segmented image and original image.

• Coupled systems mechanics
• /
• v.1 no.1
• /
• pp.59-78
• /
• 2012

The available analytical methods of analysis for laterally loaded piles in level ground cannot be directly applied to such piles in sloping ground. With the commercially available software, the simulation of the appropriate field condition is a challenging task, and the results are subjective. Therefore, it becomes essential to understand the process of development of a user-framed numerical formulation, which may be used easily as per the specific site conditions without depending on other indirect methods of analysis as well as on the software. In the present study, a detailed three-dimensional finite element formulation is presented for the analysis of laterally loaded piles in sloping ground developing the 18 node triangular prism elements. An application of the numerical formulation has been illustrated for the pile located at the crest of the slope and for the pile located at some edge distance from the crest. The specific examples show that at any given depth, the displacement and bending moment increase with an increase in slope of the ground, whereas they decrease with increasing edge distance.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.73-80
• /
• 2023

The recent growth in the use of mobile devices has contributed to increased computing and storage requirements. Cloud computing has been used over the past decade to cater to computational and storage needs over the internet. However, the use of various mobile applications like Augmented Reality (AR), M2M Communications, V2X Communications, and the Internet of Things (IoT) led to the emergence of mobile cloud computing (MCC). All data from mobile devices is offloaded and computed on the cloud, removing all limitations incorporated with mobile devices. However, delays induced by the location of data centers led to the birth of edge computing technologies. In this paper, we discuss one of the edge computing technologies, i.e., cloudlet. Cloudlet brings the cloud close to the end-user leading to reduced delay and response time. An algorithm is proposed for scheduling tasks on cloudlet by considering VM's load. Simulation results indicate that the proposed algorithm provides 12% and 29% improvement over EMACS and QRR while balancing the load.