• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.221-230
• /
• 2019

In this paper, shear behavior of non-persistent joint surrounded in concrete and gypsum layers has been investigated using experimental test and numerical simulation. Two types of mixture were prepared for this study. The first type consists of water and gypsum that were mixed with a ratio of water/gypsum of 0.6. The second type of mixture, water, sand and cement were mixed with a ratio of 27%, 33% and 40% by weight. Shear behavior of a non-persistent joint embedded in these specimens is studied. Physical models consisting of two edge concrete layers with dimensions of 160 mm by 130 mm by 60 mm and one internal gypsum layer with the dimension of 16 mm by 13 mm by 6 mm were made. Two horizontal edge joints were embedded in concrete beams and one angled joint was created in gypsum layer. Several analyses with joints with angles of $0^{\circ}$, $30^{\circ}$, and $60^{\circ}$ degree were conducted. The central fault places in 3 different positions. Along the edge joints, 1.5 cm vertically far from the edge joint face and 3 cm vertically far from the edge joint face. All samples were tested in compression using a universal loading machine and the shear load was induced because of the specimen geometry. Concurrent with the experiments, the extended finite element method (XFEM) was employed to analyze the fracture processes occurring in a non-persistent joint embedded in concrete and gypsum layers using Abaqus, a finite element software platform. The failure pattern of non-persistent cracks (faults) was found to be affected mostly by the central crack and its configuration and the shear strength was found to be related to the failure pattern. Comparison between experimental and corresponding numerical results showed a great agreement. XFEM was found as a capable tool for investigating the fracturing mechanism of rock specimens with non-persistent joint.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.20-27
• /
• 1998

According as the member of the automobile body structure have been thinned their thickness and have become high strength, each part of the body structure has been put more severe stress condition. And, because fatigue strength of the spot welded lap joint is influenced by its geometrical and mechanical factors, welding condition and etc., there needs a quantitative and systematic evaluation method for them. In this study, by considering nugget edge of the spot weld part of the IB-type spot welded lap joint under tension-shear load to the ligament crack. fatigue strength of various IB-type spot welded lap joints was estimated with the stress intensity factor(S.I.F.) KIII which is fracture mechanical parameter. We could find that fatigue strength evaluation of the IB-type spot welded lap joints by KIII is more effective than the maximum principal stress ($\sigma$1max) at edge of the spot weld obtained from FEM analysis.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권2호
• /
• pp.83-88
• /
• 2006

AC loss is one of the main research area in AC power application using high temperature superconductor(HTS), such as HTS transformer, HTS current limiter and HTS cable, because it is closely related to efficiency, economic estimation and design of power device. A lot of research for various arrangements of HTS tapes have been performed to increase a capacity of transport current because single HTS tape can not satisfy the demanded current capacity in HTS power application. In this paper, we studied magnetization loss by different several arrangements of BSCCO tapes such as Edge-to-Edge type, Face-to-Face type and Matrix type through numerical analysis by 2D-FEM and measurement. As a result, we got the result that the magnetization loss of Face-to-Face type arrangements was lower than those of other arrangement types under the conditions of the same stacking number. We think that the result was due to shield effect by demagnetization of adjacent HTS tapes which are located face to face.

• 마이크로전자및패키징학회지
• /
• 제16권3호
• /
• pp.39-43
• /
• 2009

본 연구에서는 언더필 공정에서 플립칩과 기판사이의 모세관 작용에 의한 언더필 유동 경향에 대해 살펴보고, 언더필의 점도와 토출 위치에 따른 언더필 유동특성에 대해 살펴보았다. 플립칩의 사이즈는 $5mm{\times}5mm{\times}0.65^tmm$이며, 솔더 범프의 직경은 100 ${\mu}m$, 피치(pitch)간격은 150 ${\mu}m$, 총 1024 I/O(Input/Output)단자의 Full Grid 형태의 플립칩을 사용하였다. 기판으로 투명한 글래스 기판을 사용하였으며 플립칩 패키징의 접합 높이는 50 ${\mu}m$으로 제작하였다. 언더필의 점도 및 토출 위치가 유동특성에 미치는 영향을 살펴보기 위해, 세 종류의 점도 특성($2000{\sim}3700$cps)을 가지는 언더필과 토출 위치를 모서리와 중앙부위로 설정하였다. 언더필의 유동특성 및 충진 시간(filling time)은 CCD카메라를 사용하여 관찰하였다. 실험 결과, 언더필은 솔더 범프에 의한 유동 저항으로 인하여 가장자리 효과(edge effect)가 나타나 칩의 양쪽 측면 유동이 더 빠르게 진전되는 것을 알 수 있었다. 또한, 중앙 부위에서 토출한 경우에 비해 모서리에서 토출한 경우가, 가장자리 효과가 크고 이로 인해 칩의 양쪽 측면 유동이 더 빠르게 진전되어 충진 시간이 더 빠르다는 것을 알 수 있었다. 또한, 점도가 낮을수록, 언더필 유동이 빠르고 가장자리 효과가 크게 나타나며 전체 충진 시간이 감소됨을 알 수 있었다.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.575-584
• /
• 1997

The quality of periodontal instrument cutting edge is a basic element of effective root planing procedure. Using instruments, the sharp edge is changed into blunt or beveled edge. With the blunt instrument, the periodontal treatment can't be carried into accuracy and effective. The study on the wear of periodontal curet is insufficient, there are few publications about the change of sharpness of cutting egde after using instrument and a certen reports were published on the study of scanning electron microscope(SEM) examination. In this study, to declare the number of strokes for sharpening of instruments, the changes of cutting edge is measured by the clinical methods, tactile sensitivity examination and refraction light-white line test after scaling strokes and root planing strokes. SEM test was added for defined the changes of cutting edges. The 7/8 Gracey curets that have been never used was tested. Maxillary molars which were extracted from the School of Dental Medicine, Dankook University was used. Subjected teeth had attachment loss more than 6 mm in bucca-lingual surface and sufficient calculus of a band type in cervical area. The strokes of curet were executed 3, 5, 7, 9, 11, 13 times on scaling stroke and 10, 15, 20, 25, 30, 35 times on root planing stroke. A resident has periodontal experience over 3 years carried out the clinical examinations those tactile sensitivity examination and refraction light-white line test 5 times. The case there being tactile sensitivity certenly is 2, the case being felt tactile sensitivity is 1, and the case there not being tactile sensitivity is 0. The visual examination was recorded as following. The case that refracted white line is not recognised is 2, the case that uncerten is 1, and the case that acknowledged is 0. The results were obtained as follows. 1. After scaling strokes, the tactile sensitivity was reduced after 11 strokes and disappeared in 13 strokes. 2. In tactile sensitivity after root planing procedures, sensitivity was reduced after 25 strokes and disappeared in 35 strokes. 3. In case of visual examination, the detection of refracted white line was increased after 9 strokes of scaling procedures and the accuracy of wear wasn't showed after root planing procedures. 4. In SEM, metal projection was observed on new periodontal curet cutting edge and it was disappeared after scaling procedures. 5. In SEM, the cutting edge was showed changing linear into an aspect of the surface after 5 strokes of scaling procedures and 10 strokes of root planing procedures and showed beveled edge in 11 strokes of scaling procedures, 25 strokes of root planing procedures. The results of 3-type examination indicated that the sharpening of curet should be performed after 11 strokes of scaling procedures and 25 strokes of root planing procedures.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.482-484
• /
• 2005

The Modulation Transfer Function (MTF) is commonly used to characterize the spatial quality of imaging systems. This work is the attempt to measure the MTF at Nyquist frequency of the satellite imaging system what has 1m spatial resolution for KOMPSAT-2 image using the edge function. Artificial tarp targets are used in this study. A type of this tarp edge consists of two adjacent uniform bright and dark sides commonly used to test the performance of an optical system in edge function. The results from this work demonstrate the potential applicability of this method to estimate the response characteristics for KOMPSAT-2 that is scheduled to be launched.

• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.148-155
• /
• 2008

본 논문에서는 웨이퍼 에지 노광장비에 핵심 부분인 웨이퍼의 편심오차의 측정알고리즘과 플랫/노치의 방향을 해석하는 알고리즘을 제안하였다. 또한 새로 제안된 알고리즘을 전산 시뮬레이션을 통해 그 유효성을 확인하였으며 제작된 웨이퍼 에지 노광기에 적용하여 실제 장비에 적용 가능함을 확인하였다. 제안된 알고리즘을 위해 필요한 웨이퍼 에지 위치 검출방식에 있어 과거의 접촉식 방법을 사용함으로서 발생하는 파티클의 오염을 제거하기 위해 선형 CCD 센서를 적용한 비접촉 방식의 데이터 측정법을 적용함으로서 파티클의 오염을 제어 할 수 있었다.

• 수산해양기술연구
• /
• 제42권2호
• /
• pp.86-96
• /
• 2006

This research aims at establishing the fundamental characteristics of the kite through the analysis of the flow field around various types of kites. The approach of this study were adopted for the analysis; visualization by PIV(particle image velocimetry). Also, the lift and drag tests of kites had been performed in our previous finding(Bae et al., 2004a; Bae et al., 2004b). For this situation, models of canvas kite were deployed in the circulating water channel for the PIV test using the same conditions as in the lift and drag tests. The results obtained from the above approach are summarized as follows: Given the rectangular and triangular kites when attack angle is $20^{\circ}$, vortex by the boundary layer separation was seen in the leading edge and the flow towards the trailing edge was more turbulent. But, the inverted triangular type kite was seen to be stable without any boundary layer separation or turbulence. The increase of the attack angle resulted in the eddy in order of the rectangular, triangular and inverted triangular type. The magnitude of the eddy followed the same order. The effect of edge-eddy was biggest in the triangular type followed by the rectangular and then the inverted triangular type. The kite as the buoyancy device or the opening device will be very useful when the appropriate applications and the stability are met.

• 한국환경복원기술학회지
• /
• 제12권6호
• /
• pp.123-130
• /
• 2009

Fragmentation due to land developments causes disturbances and changes of composition in forest vegetation. The purpose of the study was to develop the impact assessment model for quantitative distance or degree of disturbance by land developments. This study conducted a survey about structure and composition of forest vegetation to determine degree of impact from land developments. The results of field survey, there was a difference in structure and composition of forest vegetation such as tree canopy, herbaceous cover, and number of vine and alien species the distances from edge to interior area such as 0m, 10m, 20m, 40m, and over 60m. To assess the disturbance of forest vegetation, the factors selected were the rate of vine's cover and appearance of alien species. The impact assessment model about vine species explained by a distance, forest patch size, type of forest fragmentation, and type of vegetation ($R^2$=0.44, p<0.001). The other model about alien species explained by a distance, type of forest fragmentation, type of vegetation, and width of road (85.9%, p<0.005). The models applied to Samsong housing development in Goyang-si, Gyunggi-do. The vines and alien species in the study area have had a substantial impact on forest vegetation from edge to 20 or 40m. The impact assessment models were high reliability for estimating impacts to land developments. The impact of forest vegetation by development activities could be minimized thorough the adoption of the models introduced at the stage of EIA.

• 한국음향학회지
• /
• 제19권4호
• /
• pp.107-114
• /
• 2000

기존의 Push-Pull 트랜스듀서보다 간단한 구조를 가지며 출력을 한층 더 높이기 위해서 실린더 중앙에 구동부를 둔 새로운 구조의 Push-Pull 트랜스듀서를 설계하고자 한다. 유한 요소 상용 패키지인 ANSYS를 이용하여 트랜스듀서 모델을 구성한 후, 각종 구조 변수들, 즉, 길이, 반경, Endcap Edge 형상등의 변화에 대한 음압의 변화경향을 조사하여 최대 음압을 구현하기 위한 최적 길이, 반경, Endcap Edge 형상을 설정하였다. 기존 트랜스듀서 보다 구조적으로 더 간단하면서도 더 큰 음압을 구현할 수 있는 새로운 구조의 고출력 트랜스듀서를 개발하였고, 그 성능을 기존 트랜스듀서의 성능과 비교 평가함으로써 개발된 트랜스듀서의 우수성을 입증하였다.