• 천문학회보
• /
• 제39권2호
• /
• pp.64.2-64.2
• /
• 2014

Interacting galaxy pairs are important for study of galaxy evolution. We selected 8,542 interacting galaxy pairs out of 593,514 KIAS-VAGC galaxy sample with 0.02 < z < 0.047 and r_mag <17.6. We then classified by their interacting features into 6 types by visual inspection. We focused on two types whose spiral tidal features extend to the center of early type galaxy (ETG) or to the edge of ETG. We compared galactic parameters of these two types with those of entire 8,542 pairs as well as between the two types. Preliminary result shows both types are very close pairs (projected distance ~ 20 kpc). Spiral galaxies in the center type are more massive but less bright than those in edge type. ETGs in the edge type are brighter but not more massive than those in the center type. The center type has a mass ratio 3.4 times greater than the edge type, but the edge type has a higher angular momentum than the center type.

• 한국전산구조공학회논문집
• /
• 제19권4호
• /
• pp.399-406
• /
• 2006

황동 개재물이 있는 Al 정사각판의 고유진동수는 혼합법칙을 이용하여 해석되었다. 혼합법칙에 의한 고유진동수는 개재물의 크기에 따른 유효 내평면 파동속도와 무차원 진동수 매개변수와의 곱으로 이루어진다. 해석모델은 외팔형, 2변 고정-2변 자유형, 3변 고정-1변 자유형 및 4변 고정형의 황동 개재물이 있는 4가지의 Al판이다. 자유단이 1개 이상 존재하는 경계조건에서 개재물이 판의 중앙에 위치하였을 때 개재물에 대한 판 전체의 면적비가 1/9 이하이면 혼합법칙 및 유한요소 해석에 의한 고유진동수는 10% 이내로 잘 일치하였다 4변 고정형 경계조건을 제외하고 3가지 경계조건에서 개재물이 판중앙에 있을 경우 개재물의 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 낮아짐을 알았다. 또한 개재물의 밀도가 판의 밀도보다 작을 때, 개재물 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 높아진다.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.117-127
• /
• 1996

This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.76.1-76.1
• /
• 2010

Furnace를 이용한 $POCl_3$ 확산 공정은 실리콘 태양전지 제작과정에서 일반적으로 이용되는 에미터 층 형성 공정이다. 하지만, 확산 공정을 통해 P-N Junction을 형성할 경우 전면과 후면의 contact현상이 발생하게 되고 이를 제거하기 위해 Edge isolation 공정을 거치게 된다. 최근에는 레이저로 V 모양의 홈을 형성하는 방법이 이용되고 있다. 본 연구에서는 p-type 실리콘 웨이퍼 기판에 insulating barrier를 형성하여 edge isolation 공정을 없앤 Non-edge isolation공정을 제시한다. Non p-type 실리콘 웨이퍼에 insulating barrier를 형성한다. Insulating barrier가 형성된 BOE용액과 KOH에서의 견딤성 실험을 진행 하였다. 이후, p-type 단결정 실리콘 태양전지의 확산 공정을 진행하여 Non edge isolation 공정을 진행한 경우와 laser를 이용한 edge isolation 공정을 진행한 태양전지를 제작하여 특성을 비교하였다.

• 복합신소재구조학회 논문집
• /
• 제3권2호
• /
• pp.47-54
• /
• 2012

In this study, composite laminate cantilever type cylindrical shells with edge-stiffeners are analyzed. A versatile 4-node flat shell element which is useful for the analysis of shell structures is used. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. Two models by load conditions are considered. Load type A and B are loaded by point load at the free edge and line load respectively. A various parameter examples are presented to obtain proper stiffened length and stiffened thickness of edge-stiffeners. It is shown that the thickness of shell can be reduced minimum 30% by appropriate edge-stiffeners.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권6호
• /
• pp.345-352
• /
• 2014

Edge detection considers the important technical details of digital image processing. Many edge detection operators already perform edge detection in digital color imaging. In this study, the edge of many real color images that represent the type of digital image was detected using a new operator in the least square approximation method, which is a type of numerical method. The Linear Fitting algorithm is computationally more expensive compared to the Canny, LoG, Sobel, Prewitt, HIS, Fuzzy, Parametric, Synthetic and Vector methods, and Robert' operators. The results showed that the new method can detect an edge in a digital color image with high efficiency compared to standard methods used for edge detection. In addition, the suggested operator is very useful for detecting the edge in a digital color image.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.236-239
• /
• 1995

It is useful to simulate the human visual function for the purpose of image-processing. In this study, the hardware of the spatial filter with the sensitivity of lateral inhibition is realized by the combination of optical parts with electronic circuits. The diffused film with the characteristics of Gaussian type is prepared as a spatial filter. An object's image is convoluted with the spatial filter. From the difference of the convoluted images, the zero-cross position is detected at video rate. The edge of object is extracted in real-time by the use of this equipment. The resolution of edge changes with the value of the standard deviation of diffused film. In addition, it is possible to extract a directional edge selectively when the spatial filter with directional selectivity is used instead of Gaussian type of spatial filter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.551-554
• /
• 2004

LED는 소비전력이 적고, 수명이 길어 LCD Backlight 용 광원으로 주목받고 있다. 현재 휴대전화기용 LCD에 많이 사용되고 있는 소형 LED Backlight의 경우 입광부에 LED의 개수가 육안으로 확인 가능할 정도의 Hot Spot이 존재한다. 이에 본 논문에서는 Reflector를 사용하여 광의 손실을 줄이고 도광판의 입광부에 산란 패턴을 설계하여 적용함으로써 도광판 입광부에서 122.7%의 휘도 상승효과와 73.4%의 휘도 균일도를 얻을 수 있었으며 이로 인해 Hot Spot을 감소시킬 수 있었다.

• 한국가시화정보학회지
• /
• 제5권2호
• /
• pp.56-63
• /
• 2007

Flow visualization and aerodynamic characteristics of delta wings with two different leading edge geometries are investigated by PIV system and wind tunnel balance when the Reynolds number is about based on the freestream velocity and the root chord length. Delta wing models have 65-deg swept angle, and the leading edge shapes are divided into round- and sharp- type. The experimental results indicated that the leading-edge vortex strength and aerodynamic coefficient in the round leading edge are stronger and more, respectively than those in the sharp one. Therefore the flow interactions between vortices and the boundary layer are more desirable or more rapidly swirled in the round-type leading edge.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.323-324
• /
• 2007