• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.1-10
• /
• 2006

본 연구에서는 수치적 방법을 이용하여 타원형 익형의 공력특성에 대한 연구를 수행하였다. 타원형 익형의 경우 현재까지 널리 사용되어진 NACA 계열 익형들에 비하여 작은 앞전 곡률반경을 가진다. 또한 NACA 계열 익형들과는 달리 앞전과 같은 곡률반경을 가지는 뒷전 형상을 가지며, 익형의 최대 두께가 시위의 1/2지점에 존재한다. 타원형 익형의 경우 이러한 형상적인 특징들에 의하여 NACA 계열 익형들과는 다른 공력특성을 나타내는데, 본 연구에서는 같은 최대 두께를 가지는 NACA 계열 익형과 타원형 익형의 다양한 유동조건에서의 공력특성에 대한 수치해석 결과의 비교를 통하여 타원형 익형의 공력특성에 대하여 살펴보았다. 또한 타원형 익형의 두께변화에 따른 공력특성의 변화 역시 함께 고려하였다.

• 대한수학회보
• /
• 제58권1호
• /
• pp.31-46
• /
• 2021

Let a and b be positive integers, and let V (G), ��(G), and ��2(G) be the vertex set of a graph G, the minimum degree of G, and the minimum degree sum of two non-adjacent vertices in V (G), respectively. An even [a, b]-factor of a graph G is a spanning subgraph H such that for every vertex v ∈ V (G), dH(v) is even and a ≤ dH(v) ≤ b, where dH(v) is the degree of v in H. Matsuda conjectured that if G is an n-vertex 2-edge-connected graph such that $n{\geq}2a+b+{\frac{a^2-3a}{b}}-2$, ��(G) ≥ a, and ${\sigma}_2(G){\geq}{\frac{2an}{a+b}}$, then G has an even [a, b]-factor. In this paper, we provide counterexamples, which are highly connected. Furthermore, we give sharp sufficient conditions for a graph to have an even [a, b]-factor. For even an, we conjecture a lower bound for the largest eigenvalue in an n-vertex graph to have an [a, b]-factor.

• Journal of Ecology and Environment
• /
• 제44권2호
• /
• pp.90-97
• /
• 2020

Background: Natural forests are generally considered to be less prone to biological invasions than other modified ecosystems, particularly when canopy cover is high. Few decades of management of degraded forests by local communities in Nepal has increased canopy cover and altered disturbance regimes. These changes might have reduced the abundance of invasive alien plant species (IAPS) in forests. To understand the status of IAPS in such forests, we studied two community managed Shorea robusta forests (Sundari and Dhusheri) of Nawalpur district in central Nepal. In these two forests, vegetation sampling was done using circular plots 10 m radius at forest edge, gaps, and within canopy. Variation of IAPS richness and cover across these microhabitats were compared, and their variation with tree canopy cover and basal area analyzed. Result: Altogether 14 IAPS were recorded in the study forests; among them Chromolaena odorata, Ageratum houstonianum, and Lantana camara had the highest frequency. Mikania micrantha was at the early stage of colonization in Sundari Community Forest (CF) but absent in Dhuseri CF. Both IAPS cover and richness was higher at forest edge and gap than in canopy plots and both these attributes declined with increasing canopy cover and tree basal area. Conclusion: The results indicate that increase in canopy cover and closure of forest gaps through participatory management of degraded forests can prevent plant invasions and suppress the growth of previously established IAPS in Shorea robusta forests of Nepal. This is the unacknowledged benefit of participatory forest management in Nepal.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.128-133
• /
• 2011

In the present study, the flow fields in between the propeller and the semi-spade rudder are investigated by using PIV technique to find out the influences of both simulated hull wake and propeller wake on the incident flow to the rudder. The velocity fields are measured at the propeller rotation angle of $180^{\circ}$ and the rudder deflection angles of $0^{\circ}$. Flow fields measured at each rudder deflection angle are analyzed in terms of angle-of-attack against the rudder leading edge. The hull wake increases the angle-of-attack more than that in the uniform inflow condition, forming the angle-of-attack of about $20^{\circ}$ at 0.7R(R=propeller radius) position. The distribution of the angle-of-attack is strongly affected by the stagnation point around the leading edge and camber effect of the rudder. These effects provide asymmetric distribution of angle-of-attack with respect to the leading edge of the rudder.

• 한국음향학회지
• /
• 제28권4호
• /
• pp.299-307
• /
• 2009

본 연구에서는 마이크로스피커에서 진동판의 패턴에 따른 음향특성의 변화를 연구하였다. 진동판을 에지부와 돔부로 크게 나누고, 이들 각각에 대한 패턴형태의 변화는 진동판의 인장강도에 영향을 주는 것으로 나타났고, 그 결과로써 마이크로스피커의 공명진동수가 변하였다. 에지부에서 패턴의 수가 증가하면, 공명진동수가 증가하여 최대가 된 후에 다시 지수함수적으로 감소하였다. 에지부에서 "U"형 드릴의 사용, 회오리형 패턴과 "V"형 드릴의 각도를 감소시키거나 또는 돔부에서 방사형 패턴의 수와 돔 높이의 감소와 곡률반경의 증가는 진동판의 인장강도를 증가시켜 공명진동수를 높였다. 그러나 에지부에서 "V"형 드릴의 사용, 방사형 패턴과 "V"형 드릴각도의 증가와 돔부에서 방사형 패턴의 수와 돔의 높이를 증가시키거나 곡률반경을 감소시키면 진동판의 인장강도가 감소하여 공명진동수가 감소하였다.

• KSTLE International Journal
• /
• 제2권2호
• /
• pp.85-92
• /
• 2001

The variation of contact traction induced by different contact shapes is studied experimentally and theoretically. Considerations fer the contact shape are rounded, truncated and truncated with rounding punches. A fretting wear experiment is conducted with the contact configuration of the strip on the tube specimens. The strip specimen is pressed to form the end profile of a rounded and truncated with rounding punches shape. Wear on the tube is investigated, which is regarded as the slip region of the contact surface. Taken into consideration is the general solution of the normal traction in the case of the indentation by a punch with its end profile of the combination of parabolas. Then, partial slip solution is obtained numerically, which is compared with the wear on the tube. The radius of the rounding and the obliquity of the edge truncation affect the tractions considerably. It is found that the proper choice of the end profile can restrain the contact-induced failure such aswear.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.301-306
• /
• 2011

The rear of the vehicle generally overhangs the rear axle. As a result, the rear of a vehicle swings to the outside of the rear axle(rear swing-out). In front steering vehicles, rear swing-out is not important because rear swing-out values measured outside the rear edge are relatively small. However, in the case of the bimodal tram with AWS(all wheel steering), the rear swing-out values increase because of the rear steering at a reverse phase angle. Off-tracking is defined as the radial offset between the path of the centerline of the front axle and the path of the centerline of the following axle. In this paper, in addition to determine the turning performance of bimodal tram with AWS, turning radius, swing-out, off-tracking and swept path width were also investigated.

• Structural Engineering and Mechanics
• /
• 제73권6호
• /
• pp.631-640
• /
• 2020

Using backup plate is one of the most commonly used methods to decrease drilling-induced delamination of composite laminates. It has been shown that, the size of the delamination zone is related to the vertical element of cutting force named as thrust force. Also, direct control of thrust force is not a routine task, because, it depends on both drilling parameters and mechanical properties of the composite laminate. In this research, critical feed rate and thrust force are predicted analytically for delamination initiation in drilling of composite laminates with backup plate. Three common theories, linear elastic fracture mechanics, classical laminated plate and mechanics of oblique cutting, are used to model the problem. Based on the proposed analytical model, the effect of drill radius, chisel edge size, and backup plate size on the critical thrust force and feed rate are investigated. Experimental tests were carried out to prove analytical model.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.175-178
• /
• 2014

The flame cell dynamics in 2-D opposed nonpremixed tubular configuration was investigated using high-fidelity numerical simulations. The diffusive-thermal instability occurs as the $Damk{\ddot{o}}hler$ number, Da, approaches the 1-D extinction limit of the tubular flames and several flame cells are generated depending on Da, and flame radius. In general, the number of flame cells are found close to the largest wave number from the linear stability analysis. It was also found from the displacement speed analysis that during the local flame extinction and cell formation, negative edge flame speed is observed due to small gain from reaction compared to large loss from diffusion.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.228-236
• /
• 2002

In this study, the carbon steels, SM20C were machined with the tungsten carbide tipped circular saw to clarify the cutting-off characteristics in terms of tool wear. The results show that an improved performance in view of both the tool wear and the cutting efficiency was obtained by using oil base cutting fluid at the cutting speed of 100m/min with the feed of 0.06mm/tooth. The rake angle of 10$^{\circ}$ , clearance angle of 8$^{\circ}$ , nose radius of R0.1mm, and end cutting edge champer of 0.1mm$\times$25$^{\circ}$ are believed as the best tool geometries. The tool wear decreases due to using the saw of the disk of STS5 and the tool material of P30.