Purpose: Some of the properties of the prosodic phrasing and some acoustic and phonological effects of contrastive focus on the tonal pattern of Seoul Korean is explored based on a brief experiment of analyzing the fundamental frequency(=FO) contour of the speech of the author. Data Base and Analysis Procedures: The examples were chosen to contain mostly nasal and liquid consonants, since it is difficult to track down the formants in stops and fricatives during their corresponding consonantal intervals and stops may yield an effect of unwanted increase in the FO value due to their burst into the following vowel. All examples were recorded three times and the spectrum of the most stable repetition was generated, from which the FO contour of each sentence was obtained, the peaks with a value higher than 250Hz being interpreted as a high tone (=H). The result is then discussed within the prosodic hierarchy framework of Selkirk (1986) and compared with the tonal pattern of the Northern Kyungsang dialect of Korean reported in Kenstowicz & Sohn (1996). Prosodic Phrasing: In N.K. Korean, H never appears both on the object and on the verb in a neutral sentence, which indicates the object and the verb form a single Phonological Phrase ($={\phi}$), given that there is only one pitch peak for each $={\phi}$. However, Seoul Korean shows that both the object and the verb have H of their own, indicating that they are not contained in one $={\phi}$. This violates the Optimality constraint of Wrap-XP (=Enclose a lexical head and its arguments in one $={\phi}$), while N.K. Korean obeys the constraint by grouping a VP in a single $={\phi}$. This asymmetry can be resolved through a constraint that favors the separate grouping of each lexical category and is ranked higher than Wrap-XP in Seoul Korean but vice versa in N.K. Korean; $Align-x^{lex}$ (=Align the left edge of a lexical category with that of a $={\phi}$). (1) nuna-ka manll-ll mEk-nIn-ta ('sister-NOM garlic-ACC eat-PRES-DECL') a. (LLH) (LLH) (HLL) ----Seoul Korean b. (LLH) (LLL LHL) ----N.K. Korean Focus and Phrasing: Two major effects of contrastive focus on phonological phrasing are found in Seoul Korean: (a) the peak of an Intonatioanl Phrase (=IP) falls on the focused element; and (b) focus has the effect of deleting all the following prosodic structures. A focused element always attracts the peak of IP, showing an increase of approximately 30Hz compared with the peak of a non-focused IP. When a subject is focused, no H appears either on the object or on the verb and a focused object is never followed by a verb with H. The post-focus deletion of prosodic boundaries is forced through the interaction of StressFocus (=If F is a focus and DF is its semantic domain, the highest prominence in DF will be within F) and Rightmost-IP (=The peak of an IP projects from the rightmost $={\phi}$). First Stress-F requires the peak of IP to fall on the focused element. Then to avoid violating Rightmost-IP, all the boundaries after the focused element should delete, minimizing the number of $={\phi}$'s intervening from the right edge of IP. (2) (omitted) Conclusion: In general, there seems to be no direct alignment constraints between the syntactically focused element and the edge of $={\phi}$ determined in phonology; all the alignment effects come from a single requirement that the peak of IP projects from the rightmost $={\phi}$ as proposed in Truckenbrodt (1995).
The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.
급속 구개확장은 정중구개봉합을 이개하기 위하여 강한 힘을 치아에 가하게 된다. 확장후 정중구개봉합부에 존재하는 골모세포와 섬유모세포의 증식 활성도를 측정하여 정중구개확장이 생리적으로 진행되는지를 확인하고, 이때 개개 치아의 치주조직에서 나타나는 변화를 조사하기 위하여 약 10개월된 유성견 10마리를 대상으로 상악 제2소구치와 제1대구치에 Hyrak screw를 장착하였다. 실험동물은 대조군 1마리, 1주 확장한 군 3마리, 2주 확장한 군 3마리, 2주 확장후 2주 보정한 군 3마리로 구분하여, Screw를 1일 1/4회전시켜 확장하였고, 제2소구치, 제3소구치, 그리고 제 1대구치 부위의 정중구개봉합부와 치주조직을 절취하여 Soft X-ray로 관찰하고, 형태학적 및 면역조직화학적 변화를 광학현미경으로, 그리고 골개조를 편광현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. 편광현미경 소견에서는 대조군에 비하여 1주 확장군의 봉합부에서 골 형성과 흡수가 크게 증가되었으며, 2주 확장군에서 약간 감소를 보이다가, 보정군에서는 석회화가 크게 진행되었다. 2. 면역조직화학적 연구에서는 대조군에 비하여 1주 확장군의 봉합부에서 골모세포가 PCNA(Proliferating Cell Nuclear Antigen)에, 미분화 섬유모세포가 EGF(Epidermal Growth Factor)에 약간 증가된 양성 반응을 보였으며 EGF에 대한 골모세포의 반응은 낮았다. 2주 확장군에서는 섬유아세포와 골모세포에서 PCNA와 EGF에 대한 양성반응이 증가되었다. 보정군에서는 이들 PCNA와 EGF에 양성반응을 나타내는 세포들이 구개돌기 골단 주변에 집중되었다. 3. 확장기간 중 봉합부 주변에서 광범위한 골 흡수와 골형성을 동반한 골개조가 일어났으며, 보정군에서는 다소 감소하였다. 2주 확장군과 보정군의 제3소구치 와 제1대구치의 치근단에서 백악질 형성과 흡수가 나타났으며, 제1대구치의 협측 치경부에서 광범위한 초자양 변성대가 나타났다. 4. Soft X-ray소견에서 1주 확장군은 대조군에 비교하여 봉합부위의 여러부분에서 미세 파절과 저석회화된 결손부위를 보였다. 대조군과 보정군 사이 에는 정중구개봉합부의 석회화 정도에 별 차이 가 없었다. 2주 확장군과 보정군에서 제3소구치와 제1대구치는 협측으로 경사되는 경향을 보였다.
Cleft lip and/or palate is the congenital orofacial malformation most commonly occurred in humans, The disease is multifactorial and is probably caused by genetic and/or environmental factors, So, there are many problems in research concerning etiology and in treatment of the disease, Even the most practiced and sophisticated methods of surgical repair are necessarily followed by scar contraction and fibrosis, which result in skeletal defects, dental abnormalities, cosmetic disfigurement, and speech impairment, As a result, Fetal surgery can be considered but practiced rarely when the deformity is not fatal to life, And treatment of cleft palate is performed in the form of medicine projection into uterus in animal experiments, Many studies show that growth factor and its receptor emerge from the developing palate; and the epidermal growth factor receptors have a important role in craniofacial development and in palatal fusion, The palatal morphogenesis of the avine is different from the mammal's; it takes the form of physiologic cleft palate, Recently, cleft palate fusion experiment was performed when the avine were in the period of palate formation through the exogenous TGF-β3 addition, and it showed that the exogenous TGF-β3 makes fusion of divided palate through certain process when cleft palate is occurred in palatal formation, In this study, I had the conformation of the fusion of cleft palate through the addition of TGF-β in case of chicken embryo, and observed the effect of TGF-β in EGF receptor distribution, And the following is the results of this study, 1. In case of the TGF-βl and β3 addition group, there was the decrease of EGFR(Epidermal Growth Factor Receptor) immunoreactivity in mesenchymal cells beneath the medial edge epithelium and also in epithelial mesenchymal interface which is between medial edge epithelium and nasal septum in 72 hours, 2, The immunoreactivity of the control group resembles that of normal chicken embryo palate in development, 3. In the view through fluorescence confocal microscopy, there was confluence in TGF-β3 addition group, This shows that the confluence induced by exogenous TGF-β3 is related to EGFR expression in palate of chicken embryo, which is a physiologic cleft palate model.
스테레오 영상은 2-D 영상으로 분석할 수 없는 깊이(거리) 정보를 포함하고 있다. 하지만 연산을 통해서 거리정보를 얻을 수 있기 때문에 계산 값의 신뢰도가 낮고, 폐색된 공간 등의 영향으로 오차가 발생한다. 또한 Stereo Matching 시 Global Method를 사용할 경우, 많은 연산량에 따라 계산 시간이 오래 걸린다. 따라서 본 논문에서는 연산 시간이 짧고 더 높은 정확도를 갖는 Disparity Map을 구하는 방법을 제안한다. 특징 기반 영상분할 기법인 윤곽선 추출을 통해 정확도는 높이고 연산 시간은 줄였다. 컬러 기반 영상 분할 기법인 Color K-Means를 통해 관심 영역을 추출하고, 이를 기반으로 Loopy Belief Propagation(LBP)을 접목하였다. 제안하는 방법을 적용함으로 영상 내 물체들의 연관성을 고려한 보정이 가능하였고, 관심 영역 추출에 따라 연산 시간을 줄일 수 있었다. 실험 결과, 기존의 방법들보다 연산 시간이 짧고 정확도가 높은 Disparity Map을 얻을 수 있었다.
최근 상용화된 5G 이동통신의 주요한 특징은 High Data Rate와 Connection Density 그리고 Low Latency로 대표할 수 있는데, 이중 기존 4G와 가장 차별되는 특징은 Low Latency로 다양한 새로운 서비스 제공의 기반이 될 것이다. 이러한 특징을 활용한 서비스로는 AR, 자율주행 등이 검토되고 있으며 관련표준에서도 5G Network Latency 논의를 진행하고 있다. 그러나 서비스 관점의 E2E Latency 논의는 많이 부족한 것이 사실이다. 5G에서 Low Latency를 달성을 위한 최종목표는 RTD 기준 Air Interface 1ms 달성으로 이는 '20년 초 Rel-16을 통한 URLLC(Ultra-reliable Low Latency Communications)를 통해 가능하며, 추가적으로 MEC(Moble Edge Computing)를 통한 Network latency 감소도 연구 중이다. 전체 5G E2E Latency는 5G Network 관련 외에도 다양한 요인이 존재하는데, 주요 요인으로는 5G Network과 서비스 제공을 위한 IDC Server 사이의 경로에 놓인 선로/장비 Latency, 단말 App과 Server 내 서비스 처리를 위한 Processing Latency 등이 존재한다. 한편, 서비스 초기 Setup을 위한 Latency와 서비스가 지속 중인 경우의 Latency를 구분하여 세부 서비스 요구사항에 대하여 연구하는것도 필요한데, 이를 위해 본 논문에서는 서비스 초기 Setup과 관련하여 다음과 같은 세가지 요인에 대하여 검토를 진행하였다. 첫째로 (1) Data호 Setup시에 발생 가능한 Latency, 둘째 전력 효율화를 위한 (2) CRDX On/Off에 따른 영향, 마지막으로 (3) H/O가 발생되는 경우에 Latency에 대하여 Latency에 미치는 영향을 실험과 분석을 제시했다. 이를 통해 우리는 Low Latency가 필요한 서비스의 초기 Setup시에 Latency와 관련된 서비스 요구사항 및 기획에 기여할 수 있을 것으로 기대한다.
Objective: This study aimed to investigate whether a deep learning reconstruction (DLR) method improves the image quality, stent evaluation, and visibility of the valve apparatus in coronary computed tomography angiography (CCTA) when compared with filtered back projection (FBP) and hybrid iterative reconstruction (IR) methods. Materials and Methods: CCTA images of 51 patients (mean age ± standard deviation [SD], 63.9 ± 9.8 years, 36 male) who underwent examination at a single institution were reconstructed using DLR, FBP, and hybrid IR methods and reviewed. CT attenuation, image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and stent evaluation, including 10%-90% edge rise slope (ERS) and 10%-90% edge rise distance (ERD), were measured. Quantitative data are summarized as the mean ± SD. The subjective visual scores (1 for worst -5 for best) of the images were obtained for the following: overall image quality, image noise, and appearance of stent, vessel, and aortic and tricuspid valve apparatus (annulus, leaflets, papillary muscles, and chordae tendineae). These parameters were compared between the DLR, FBP, and hybrid IR methods. Results: DLR provided higher Hounsfield unit (HU) values in the aorta and similar attenuation in the fat and muscle compared with FBP and hybrid IR. The image noise in HU was significantly lower in DLR (12.6 ± 2.2) than in hybrid IR (24.2 ± 3.0) and FBP (54.2 ± 9.5) (p < 0.001). The SNR and CNR were significantly higher in the DLR group than in the FBP and hybrid IR groups (p < 0.001). In the coronary stent, the mean value of ERS was significantly higher in DLR (1260.4 ± 242.5 HU/mm) than that of FBP (801.9 ± 170.7 HU/mm) and hybrid IR (641.9 ± 112.0 HU/mm). The mean value of ERD was measured as 0.8 ± 0.1 mm for DLR while it was 1.1 ± 0.2 mm for FBP and 1.1 ± 0.2 mm for hybrid IR. The subjective visual scores were higher in the DLR than in the images reconstructed with FBP and hybrid IR. Conclusion: DLR reconstruction provided better images than FBP and hybrid IR reconstruction.
This article was intended as fundamental materials to recognize the current status of furniture hard ware in Korean market and to fix the identity of Korean furniture, by investigating and comparing the furniture hard ware used in the Joseon era and in modern times by type, function, shape and material. The analysis of furniture hard ware of the Joseon era and modern times from the view of functional aspects was oriented to the hard ware necessary to open and close the door & drawer on one side, and to that being attached to the main body of furniture not to scratch the wood by another wood on the other side, and from this the following conclusion was drawn. First of all, "Gwangdoojung" - a kind of spike- and metal decoration on the edge of the furniture disappeared, while the function-oriented hard wares have been diversified in modern times, from the perspective of the change of kinds. Second, the functional aspect of the furniture hard ware was emphasized in modern times than the Joseon era. In other words, the hard wares of the Joseon era came into view due to their strong appeal to decoration, whereas those of modern times were mostly hidden or moderated, keeping the function substantially. Third, the hard wares from the Joseon era were shown in concrete and detailed shape motivated by natural objects and furthermore even gloriously, but the modern hard wares are simple & basic geometry, from a formative point of view. Fourth, the material aspects present that the Joseon era's hard ware was mainly cast iron, whereas that of modern times shows the diversification from metal to even plastic. Finally, the recent trend in naming of the hard wares is the words of foreign origin. This resulted from that the foreign names of hard wares are valid also after import process in Korean market, so the domestic development of hard ware as the essential factor for the furniture design is urgently necessary to establish the identity of Korean modern furniture.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.