• 대한기계학회논문집
• /
• 제6권3호
• /
• pp.232-238
• /
• 1982

The behavior of corner crack propagation by unidirectional plane bending fatigue was investigated in the butt welded joints of SS41 and SM50 steel plates including an edge through-thickness notch. The properties of fatigue crack propagation were inspected in the weld metal, heat-affected zone, and base metal of the welded joints. Main results obtained are as follows; (1) When a plate with an edge through-thickness notch is loaded by plane bending fatigue in indirection, the 2 variant corner cracks on the upper and lower edge of the plate are initiated and propagated respectively from the notch. (2) In case of a specimen containing a corner crack, it is more reasonable to estimate the crack propagation rate by area of fracture surface than by crack surface length. (3) The rate of fatigue crack propagation becomes faster in the following order; weld metal, heat-affected zone, and base metal. (4) The specimen including reinforcement shape is rapidly failed throughout bond due to effect of its shape when the repeated load exceeds a certain cycle.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.39-42
• /
• 2004

In the present paper, a novel systematic method using the 2-D hybrid special finite elements containing an edge crack is employed to study the fracture behaviors of laser beam spot-welds in automotive structures. 2-D hybrid special finite elements each containing an edge crack can assure the high precision especially in the vicinity of crack tips and give a better description of its singularity with only one hybrid element surrounding one crack. Therefore, the numerical modeling of the laser beam spot-welds can be greatly simplified. Some numerical examples are provided to demonstrate the validity and versatility of the proposed method. All the lap-shear, lap-tension and angle clip specimens are analyzed and some useful fracture parameters (such as stress intensity factors, the initial direction of crack growth) are obtained simultaneously.

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.779-789
• /
• 2021

Cracks in railway sleeper are an inevitable condition and has a significant influence on the safety of railway system. Although the technology of railway sleeper condition monitoring using machine learning (ML) models has been widely applied, the crack recognition accuracy is still in need of improvement. In this paper, a two-stage method using edge detection and convolutional neural network (CNN) is proposed to reduce the burden of computing for detecting cracks in railway sleepers with high accuracy. In the first stage, the edge detection is carried out by using the 3×3 neighborhood range algorithm to find out the possible crack areas, and a series of mathematical morphology operations are further used to eliminate the influence of noise targets to the edge detection results. In the second stage, a CNN model is employed to classify the results of edge detection. Through the analysis of abundant images of sleepers with cracks, it is proved that the cracks detected by the neighborhood range algorithm are superior to those detected by Sobel and Canny algorithms, which can be classified by proposed CNN model with high accuracy.

• 전산구조공학
• /
• 제10권1호
• /
• pp.129-134
• /
• 1997

탄성 섬유와 점탄성 기지로 구성된 2차원의 단일방향 복합재료에서 발생하는 계면 응력 특이성을 시간영역 경계요소법을 사용하여 조사하였다. 먼저, 아무런 균열없이 섬유와 기지가 완전하게 결합되어 있는 단일방향 복합재료에 횡방향 인장변형이 작용할때 자유경계면 부근에 나타나는 계면 특이응력들을 조사하였다. 그러한 응력들은 섬유와 기지의 결합분리나 계면 모서리 균열을 야기 시킬수 있다. 다음에, 여러가지 크기의 모서리 균열들에 대한 응력확대계수가 계산되었다.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.767-780
• /
• 2015

Delaminations and cracks are common failures in structures. They may significantly reduce the stiffness of the structure and affect their vibration characteristics. In the present study, an analytical solution is developed to study the effect of an edge crack on the vibration characteristics of delaminated beams. The rotational spring model, the 'free mode' and 'constrained mode' assumptions in delamination vibration are adopted. This is the first study on how an edge crack affects the vibration characteristic of delaminated beams and new nondimensional parameters are developed accordingly. The crack may occur inside or outside the delaminated area and both cases are studied. Results show that the effect of delamination length and thickness-wise location on reducing the natural frequencies is aggravated by an increasing crack depth. The location of the crack also influences the effect of delamination, but such influence is different between crack occurring inside and outside the delaminated area. The difference of natural frequencies between 'free mode' and 'constrained mode' increases then decreases as the crack moves from one side of the delaminated region to the other side, peaking at the middle. The analytical results of this study can serve as the benchmark for FEM and other numerical solutions.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.727-739
• /
• 2018

Crack is the most common typical feature of concrete deterioration, so routine monitoring and health assessment become essential for identifying failures and to set up an appropriate rehabilitation strategy in order to extend the service life of concrete structures. At present, image segmentation algorithms have been applied to crack analysis based on inspection images of concrete structures. The results of crack segmentation offering crack information, including length, width, and area is helpful to assist inspectors in surface inspection of concrete structures. This study proposed an algorithm of image segmentation enhancement, named morphological segmentation based on edge detection-II (MSED-II), to concrete crack segmentation. Several concrete pavement and building surfaces were imaged as the study materials. In addition, morphological operations followed by cross-curvature evaluation (CCE), an image segmentation technique of linear patterns, were also tested to evaluate their performance in concrete crack segmentation. The result indicates that MSED-II compared to CCE can lead to better quality of concrete crack segmentation. The least area, length, and width measurement errors of the concrete cracks are 5.68%, 0.23%, and 0.00%, respectively, that proves MSED-II effective for automatic measurement of concrete cracks.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.954-957
• /
• 2004

Tire belt durability is characterized by the initiation of a crack at the belt edge region, and the propagation of the crack until the ply is separated. Experimental methods have been used to analysis of the belt durability in the cord-reinforced rubber composite tires, but it takes much cost and time to make experiments. In this paper, a finite element method to analyze the fatigue life of a crack at the belt edge of tires is presented. The fatigue life is analyzed by using a three-dimensional Finite Element Modeling. This method includes a global-local finite element analysis to provide the detail necessary to model explicitly an internal crack and use of the J-integral for energy release rate evaluation.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.907-915
• /
• 2001

Application of bonded dissimilar materials in many industries are increasing. When these materials are to be used in structures, it needs to evaluate the failure strength applying fracture mechanics. Al/Epoxy bonded dissimilar materials with an interface crack and an interface crack emanating from an edge semicircular hole were prepared, experiment of fracture toughness were carried out. Stress intensity factors of interface cracks in bonded dissimilar materials were computed with boundary element method(BEM) and the fracture criteria of mixed mode crack were analyzed. From the results, the fracture criteria and the method of strength evaluation by the fracture toughness in Al/Epoxy bonded dissimilar materials were proposed.

• 한국건설관리학회논문집
• /
• 제25권2호
• /
• pp.36-44
• /
• 2024

본 논문에서는 합성곱신경망과 ROI기법을 이용한 콘크리트 균열 분석에 관해 소개한다. 콘크리트 표면, 빔과 같은 구조물은 피로 응력, 주기 부하에 노출되며, 이는 일반적으로 구조물의 표면에서 미세한 수준에서 시작되는 균열을 야기한다. 구조물의 균열은 안정성을 저하시키고 구조물의 견고함을 감소시킨다. 조기 발견을 통해 손상 및 고장 가능성을 방지하기 위한 예방 조치를 취할 수 있다. 일반적으로 수동 검사 결과는 품질이 좋지 않고, 대규모 기반 시설의 경우 접근이 어려우며, 균열을 정확하게 감지하기 어렵다. 이러한 수동검사의 자동화는 기존 방식의 한계를 해결할 수 있기 때문에 컴퓨터 비전 기반의 연구들이 수행되었다. 하지만 다양한 유형의 균열이나, 열화상 카메라 등을 이용한 연구들은 부족한 상태이다. 따라서 본 연에서는 콘크리트 벽의 균열을 자동으로 감지하는 방법론을 개발하여 제시하며, 다음과 같은 연구 내용을 목표로 한다. 첫째, 균열 감지 이미지 기반 분석의 주요 장점인 이미지 처리 기술을 사용하여 기존의 수동 방법과 비교하여 정확도가 향상된 결과 및 정보를 제공한다. 둘째, 강화된 Sobel edge segmentation 기술 및 ROI 기법 기반의 알고리즘을 개발하여 비파괴 시험을 위한 자동 균열 감지 기술을 구현한다.

• 한국안전학회지
• /
• 제6권2호
• /
• pp.5-13
• /
• 1991

In this paper, the interfacial stress intensity factors( $K_{i}$＝ $K_1$＋i $K_2$) for the edge interface crack in the dissimilar materials(isotropic-isotropic materials, isotropic-composite materials) were analysed by BEM(Boundary Element Method). The fatigue crack growth behaviour was investigated by load constant fatigue test. From the experimental results, the relationship between da/dN and interfacial stress intensity facto, ( $K_{i}$ or $K_1$) can be expressed by Paris'law for homogeneous materials.s.s.