• 대한원격탐사학회지
• /
• 제15권2호
• /
• pp.175-181
• /
• 1999

동한 난류의 북상 끝부분 해역에서 재발생하는 와동류는 봄철과 가을철에 위성이 관측한 해수면 온도 영상에 나타났다. 이러한 재발생 와동류는 1997년 9월 하순 NOAA 위성에 탑재된 AVHRR의 열적외선 영상과 일본 ADEOS 위성에 탑재된 OCTS의 클로로필 영상에도 나타났다. 와동류의 중심은 주변보다 온도가 낮으며, OCTS 위성자료에서 3mg/m$^3$ 이상의 클로로필 농도가 나타났다. 반면, 와동류를 이루는 주변의 더운물에서는 클로로필 농도가 1mg/m$^3$ 이하로 나타났다. 와동류는 가을철 표면수온영상에도 나타났으며 봄에 나타난 것보다 와동류 중심핵의 찬물 온도가 높게 나타났다. 또한 와동류 중심에서 서쪽축의 더운물 온도가 봄에 나타난 것보다 가을에 더 높게 나타났다. 1998년 3월 NOAA 위성과 SeaWIFS 위성자료에서도 재발생되는 와동류와 클로로필량의 농도가 높은 물이 와동류 주변으로 포획되는 장면이 포착되었다. 동한난류의 북쪽 확장 선두와 약 1500m 수심의 대륙붕 위로 남하하는 리만한류가 만나 충돌하는 해역에서 와동류가 형성되는 것으로 사료된다. 와동류가 형성되는 이 해역은 동해 중앙부 해수면에서 우세하게 나타나는 극전선역에서 중규모 구조의 와동류가 극전선 서쪽 해역의 역학적인 해양현상과 강한 연관성이 있음을 나타내었다. ARGOS 위성 추적 표류부이와 와동류의 상호연관성 및 와동류의 지속성에 관한 증거가 토론되었다.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.298-301
• /
• 2012

In order to know the effect of surface irregularity in the detection of local wall thinning of pipeline using pulsed eddy current (PEC), the lift-off effects on PEC signal have been investigated. Three kinds of parameters in the PEC signal, which is "peak amplitude", "time to peak amplitude" and "time to zero crossing" are analyzed to separate the lift-off effects in the PEC signal. The distance from sensor to the bottom of sample which is the total thickness of combined insulator and sample is kept constant. The magnitude of the differential peak amplitude is increased with increasing sample thickness, the time to peak amplitude is increased with increasing the sample thickness. To determine the effect of lift-off, a number of balanced transient responses combining wall thinning locations and lift-off distances were plotted.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1410-1416
• /
• 2011

A corrosion detecting system for 22.9 kV distribution power line insulation cable, which can travel autonomously along the live line, is proposed. Eddy current test method is employed to detect the corrosion, and the system developed here is capable of detecting internal corrosion of a ACSR-OC. Somewhat details of the electrical and mechanical mechanism of the system and traveling algorithm are introduced. Experimental results applied to the sample cables having artificial corrosion and the operating distribution lines are provided. From the result, we confirmed that the system is useful for detecting internal corrosion of a ACSR, and is expected to be a new non-destructive testing equipment in the area of diagnosis for the distribution power line.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.524-528
• /
• 2016

Eddy current (EC) sensor works based on the electromagnetic induction principle and has been widely applied in the industrial testing and evaluation due to its robustness and environmental adaptability. Meanwhile, tilt angle measurement is mainly based on the laser or visual method, which is strict with the measurement environment and not suitable for the industrial applications. In this paper, a novel tilt angle measurement method based on arrayed EC sensors is proposed. Both the simulation and experiments indicate that the measured error is approximately linear with tilt angle and the accuracy after compensation is $0.25^{\circ}$. In conclusion, this research cannot only broaden the scope of EC application, but also overcome the shortcomings of existing angle measurement methods.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.12-19
• /
• 1998

본 논문에서는 와전류센서를 장착하고 전선위를 자동으로 주행하도록 설계된 부식 검출장치를 이용하여 ACSR의 내부부식 검출에 대해서 다룬다. 또한 내부부식의 검출은 비파괴검사로 행해진다. 독특한 ACSR의 구조에 의한 부식현상을 와전류센서를 이용하여 검출하는 경우, 부식은 센서의 임피던스변화로 검출되고 이 현상을 이론적으로 증명한다. 또한 설계된 부식검출장치의 사양과 성능 그리고 실험방법에 대해 논하고, 현장에 적용가능한 실험결과를 얻었다. 이 부식검출장치는 ACSR의 내부부식을 비파괴로 검출할 수 있고 현실적이라는 결론을 얻었다. 피시험체인 도체의 피복여부에 관계없이 이장치는 이용가능하고, 이 장치의 실용화에 의해 선로의 유지보수의 효율을 증대시키고 선로의 향상이 기대된다.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.529-536
• /
• 2015

A defect could be generated in bolts for a use of oil filters for the manufacturing process and then may affect to the safety and quality in bolts. Also, fine defects may be imbedded in oil filter system. So it is very important that such defects be investigated and screened during the multiple manufacturing processes. Therefore, in order effectively to evaluate the fine defects, the FEM simulations were performed to make characterization in the crack detection of the bolts and the parameters such as number of turns of the coil, the coil size, applied frequency were calculated based on the simulation results. Simulations were carried out for the defect signal of eddy current probe. Exciter and receiver were utilized. In this paper, the FEM simulations were performed in both bobbin-type and pancake-type probe, both probes were optimized under Eddy current FEM simulations and the results of calculation were discussed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.88-93
• /
• 1997

Ball-end milling process is widely used in the die and mold manufacturing because of suitable for the machining of free-form surface. Pencil cutting can eliminate overload in uncut area caused by large diameter of ball-end mill before finish cutting. As the ball-end mill for pencil cutting is long and thin, it is easily deflected by cutting force. The tool deflection when pencil cutting is one of the main reason of the machining errors on a free-from surface. The purpose of the research is to find out the characteristics of deflected cutter trajectory by eddy-current sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.157-160
• /
• 1995

Pencil cutting can eliminate overload in uncut area caused by large diameter ball-end mill before finish cutting. As ball-end mill for pencil cutting is long and type, it is easily deflected by cutting force. The tool deflection when pencil cutting with thin and long ball-end mill is one of the main reason of the machining errors on a free-form surface. The purpose of the research is to find the characteristics of deflected cutter trajectory by eddy-current sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.407-410
• /
• 1995

Many researches on measurement technology has been made and developed by various methods. Considering the measurement environment with cutting fluid, coolant and the like, contact type measurement methods are mostly used. But contact measurement method has measuring force and so the sensing head becomes worn. By these reasons, we considered sensors not influenced by the former fluid and so can acquire accrate measured values using error compensation due to temperature and vibration. For this purpose, eddy current sensors and Extended kalman Filter Algorithm for processing measured data has been used. In this paper, we present new technology that can be used for measuring workpiece with previous bad environment using direct method and comparison measurement method. We used cylindrical workpieces which were produced by grinding machine for the target.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.930-933
• /
• 2000

Experimental study was conducted for finding the characteristics of machining precision according to the change of feedrate when ball endmilling of semisphere shape. The values of tool deflection and cutting force were measured simultaneously by the systems of eddy-current sensor and dynamometer. The machining precision was analyzed by roundness values, which were deeply relating with tool deflection and forces. the roundness was decreased in down-milling than in up-milling for each feedrate. As the cutting edge is moved to radius direction on the tool path, the tool deflection and the cutting force were seemed to be decreased. As the tool path was moved downward, the values of roundness, cutting force and tool deflection were obtained better ones. When compared the values of roundness, cutting force and tool deflection for different feedrate, the best machining accuracy was obtained at feed rate of 90mm/min in down-milling.