• 제목/요약/키워드: Eddy viscosity coefficient

검색결과 29건 처리시간 0.027초

저항물체 배후의 이차원 후류에 관한 대격자 수치모형 (A Numerical Model of Large Scale Grid for Two-Dimensional Wake behind Bodies)

  • 박일흠;이종섭;이문옥
    • 한국해안해양공학회지
    • /
    • 제10권2호
    • /
    • pp.83-92
    • /
    • 1998
  • 대격자망 수치모형에서 저항물체에 의한 유수저항을 평가하기 위하여, 항력으로부터 유도된 drag stress를 수심적분된 Reynolds 방정식에 도입하였다. 그리고, 해석해가 존재하는 조건에 대한 다양한 수치실험을 통하여 본 모형의 적용성 및 문제점을 검토하였다. 단일물체의 경우, 수치해는 해석해에 대하여 유속의 크기에 있어서$\pm$10% 정도의 오차범위를 나타내는 좋은 일치를 보였으며 후류폭의 크기도 전 경우에 있어서 해석해와 잘 일치 하였다. 또한, 열을 이룬 물체에 대한 항력계수와 와동점성계수가 정확하게 결정된다면, 본 모형은 열을 이룬 물체 배후에서 평균류의 흐름분포를 평가하는 데 효율적으로 이용될 수 있을 것이다.

  • PDF

저레이놀즈수 k-$\varepsilon$난류모형 개선에 관한 연구 (A Study on the Development of Low Reynolds Number k-$\varepsilon$ Turbulence Model)

  • 김명호;신종근;최영돈
    • 대한기계학회논문집
    • /
    • 제16권10호
    • /
    • pp.1940-1954
    • /
    • 1992
  • 본 연구에서는 가공기 자체의 파라메터와 성능에 관한 연구로서 출력 에너지 가 서로 다른 가공기를 사용하여 SUS 304 스테인리스 시험편을 관통, 절단하면서 출력 에너지와 최대 출력을 비교하여 보고, 시험편 관통시 주파수와 출력 에너지와의 관계, 시험편 관통시 응융 금속 제거량에 의한 절단 속도의 예측, 서로 다른 출력의 가공에 있어서 슬릿 절단 폭, 커프 폭, 드로스 길이, 절단면의 표면 거칠기 등을 비교하여 출 력차에 따른 가공 특성을 고찰하였다.

POD와 DMD를 이용한 와류형 분사기의 극저온 질소 분무 동적 특성 분석 (Dynamic Characteristics Analysis of the Cryogenic Nitrogen Injection of Swirl Injector using POD and DMD)

  • 강정석;성홍계;손채훈
    • 한국추진공학회지
    • /
    • 제21권5호
    • /
    • pp.1-9
    • /
    • 2017
  • 초임계 환경에서 와류형 분사기의 극저온 질소 분무 동적 특성 분석을 위하여 3차원 LES 난류 모델을 적용하였다. 초임계 상태에서 질소의 상태량들을 정확하게 예측하기 위해 SRK 실기체 상태방정식을 사용하였고, 점성계수와 열전도도는 Chung의 고압 상태 혼합물에 대한 방정식, 그리고 확산 계수는 Fuller의 이론에 Takahashi의 보정식을 적용하였다. 질소 분무 결과, 분사기 내, 외부에서 유동장과 음향장 사이의 상호작용으로 복잡한 유동구조가 형성된다. 복잡한 유동 현상을 분석하기 위해 FFT, POD 그리고 DMD 기법을 적용하여 해석을 수행하였다. FFT 해석을 수행하여 분사기 내, 외부에서 나타나는 특정 주파수를 파악하였으며, POD와 DMD를 통해 각 주파수가 어떠한 유동 구조를 갖는지에 대한 연구를 수행하였다. 또한, DMD를 통해 각 주파수의 감쇠 계수를 파악하여 이를 실험 결과와 비교하였다.

Impact of the lateral mean recirculation characteristics on the near-wake and bulk quantities of the BARC configuration

  • Lunghi, Gianmarco;Pasqualetto, Elena;Rocchio, Benedetto;Mariotti, Alessandro;Salvetti, Maria Vittoria
    • Wind and Structures
    • /
    • 제34권1호
    • /
    • pp.115-125
    • /
    • 2022
  • The high-Reynolds number flow around a rectangular cylinder, having streamwise to crossflow length ratio equal to 5 is analyzed in the present paper. The flow is characterized by shear-layer separation from the upstream edges. Vortical structures of different size form from the roll-up of these shear layers, move downstream and interact with the classical vortex shedding further downstream in the wake. The corresponding mean flow is characterized by a recirculation region along the lateral surface of the cylinder, ending by mean flow reattachment close to the trailing edge. The mean flow features on the cylinder side have been shown to be highly sensitive to set-up parameters both in numerical simulations and in experiments. The results of 21 Large Eddy Simulations (LES) are analyzed herein to highlight the impact of the lateral mean recirculation characteristics on the near-wake flow features and on some bulk quantities. The considered simulations have been carried out at Reynolds number Re=DU_∞/ν=40 000, being D the crossflow dimension, U_∞ the freestream velocity and ν the kinematic viscosity of air; the flow is set to have zero angle of attack. Some simulations are carried out with sharp edges (Mariotti et al. 2017), others with different values of the rounding of the upstream edges (Rocchio et al. 2020) and an additional LES is carried out to match the value of the roundness of the upstream edges in the experiments in Pasqualetto et al. (2022). The dimensions of the mean recirculation zone vary considerably in these simulations, allowing us to single out meaningful trends. The streamwise length of the lateral mean recirculation and the streamwise distance from the upstream edge of its center are the parameters controlling the considered quantities. The wake width increases linearly with these parameters, while the vortex-shedding non-dimensional frequency shows a linear decrease. The drag coefficient also linearly decreases with increasing the recirculation length and this is due to a reduction of the suctions on the base. However, the overall variation of C_D is small. Finally, a significant, and once again linear, increase of the fluctuations of the lift coefficient is found for increasing the mean recirculation streamwise length.

대한해협 서수도 냉수의 구조와 역학 (Structure and Dynamics of the Cold Water in the Western Channel of the Korea Strait)

  • 조양기;김구;김영규
    • 한국해안해양공학회지
    • /
    • 제9권3호
    • /
    • pp.132-139
    • /
    • 1997
  • 대한해협 서수도 깊은 골의 냉수구조를 파악하기 위하여 1993년 10월에 해수물성 조사와 해류관측을 실시하였다. 냉수의 두께는 20-70 m로 수심에 따라 다르다. 냉수와 대마난류 사이의 수온약층은 남쪽으로 향할수록 깊어지며, 기울기는 약 0.00057이다. 냉수 두께의 시간적 변화는 조류와 관련이 있는 것으로 보여진다. 48시간동안 두께 변화는 최대 20m이다. 72시간 동안 관측된 냉수의 평균 남하 속도는 17 cm/sec이다 냉수의 남하와, 냉수층 상부의 반류를 이해하기 위하여 역학모델을 적용하였다 모델로 구한 남향류의 최대 유속은 약 7 cm/sec이며, 수직와도점성계수는 0.038 $m^2$/sec이다. 모델을 이용하여 구한 남하 수송량은 골의 북부에서 0.032$\times$$10^{6}$㎥/sec이다. 냉수의 위 부분에 반류가 존재하므로 남쪽으로 갈수록 남하하는 냉수의 양이 줄어든다. 남하하는 수송량은 상층의 수송량이 많을수록 증가하나, 상층의 밀도와 두 층 사이 경계면 기울기의 변화에는 영향을 받지 않는다

  • PDF

평면 난류 오프셋 제트에 관한 연구 (A Study on the Plane Turbulent Offset Jet)

  • 유정열;강신형;채승기;좌성훈
    • 대한기계학회논문집
    • /
    • 제10권3호
    • /
    • pp.357-366
    • /
    • 1986
  • 본 연구에서는 3공피토우관 및 열선유속계를 사용하여 벽에 평행한 2차원 난류제트의 난류량들을 측정하였고, 스캐니 밸브를 이용하여 벽면아력분포를 측정함 으로써 재순환 영역을 포함한 전체유동장에서의 유동특성을 고찰하였다. 또한 잘 알려진 표준 k-.epsilon. 난류모형 및 유선곡률을 고려한 수정된 k-.epsilon. 난류모형을 이용하여 측정 수치해석을 수행하였다.

RMA2/RMA4 모형을 이용한 서낙동간 수문연계운영의 수질개선 효과 예측 (Prediction of Water-Quality Enhancement Effects of Gates Operation in the West-Nakdong River Using RMA2/RMA4 Models)

  • 이금찬;윤영삼;이남주
    • 한국환경과학회지
    • /
    • 제18권9호
    • /
    • pp.971-981
    • /
    • 2009
  • An objective of this study is as follows: 1) performing sensitivity analysis and parameter estimation of RMA2 and RMA4 models for the West-Nakdong River, 2) drawing up alternatives of gates-operation for water-quality enhancement, and 3) quantitative evaluation of methodology of 'flow-restoration by gates-operation' among 'Comprehensive Plan Improving Water-Quality in the West-Nakdong River(WNR)' with the target water-quality(BOD at Nakbon-N point: below 4.3 mg/L). The parameters for the RMA2 (depth-averaged two-dimensional flow model) and RMA4 (depth-averaged two-dimensional water-quality model) were determined by sensitivity analysis. Result of parameter estimation for RMA2 and RMA4 models is $1,000\;Pa{\cdot}s$ of the eddy viscosity, 20 of the Peclet number, 0.025 of the Manning coefficient, and $1.0\;m^2/s$ of the diffusion coefficient. We have evaluated the effects of water-quality enhancement of the selected alternatives by numerical simulation technique with the models under the steady-state flow condition and the time-variant transport condition. Because of no-resuspension from river bottom and considering BOD as conservative matter, these simulation results slightly differ from real phenomena. In the case of $50\;m^3/s$ of Daejeo-gate inflow, two-dimensional flow pn results result represents that small velocity occurs in the Pyungkang Stream and no flow in the Maekdo River. In the WNR, there occurs the most rapid flow near timhae-bridge. In the WNR, changes of water-quality for the four selected simulation cases(6, 10, 30, $50\;m^3/s$ of the Daejeo-gate inflow) were predicted. Since the Daejeo-Gate and the Noksan-Gate can be opened up to 7 days, it would be found that sustainable inflow of $30\;m^3/s$ at the Daejeo-gate makes BOD in the WNR to be under the target of water-quality.

Prediction of Cohesive Sediment Transport and Flow Resistance Around Artificial Structures of the Beolgyo Stream Estuary

  • Cho, Young-Jun;Hwang, Sung-Su;Park, Il-Heum;Choi, Yo-Han;Lee, Sang-Ho;Lee, Yeon-Gyu;Kim, Jong-Gyu;Shin, Hyun-Chool
    • Fisheries and Aquatic Sciences
    • /
    • 제13권2호
    • /
    • pp.167-181
    • /
    • 2010
  • To predict changes in the marine environment of the Beolgyo Stream Estuary in Jeonnam Province, South Korea, where cohesive tidal flats cover a broad area and a large bridge is under construction, this study conducted numerical simulations involving tidal flow and cohesive sediment transport. A wetting and drying (WAD) technique for tidal flats from the Princeton Ocean Model (POM) was applied to a large-scale-grid hydrodynamic module capable of evaluating the flow resistance of structures. Derivation of the eddy viscosity coefficient for wakes created by structures was accomplished through the explicit use of shear velocity and Chezy's average velocity. Furthermore, various field observations, including of tide, tidal flow, suspended sediment concentrations, bottom sediments, and water depth, were performed to verify the model and obtain input data for it. In particular, geologic parameters related to the evaluation of settling velocity and critical shear stresses for erosion and deposition were observed, and numerical tests for the representation of suspended sediment concentrations were performed to determine proper values for the empirical coefficients in the sediment transport module. According to the simulation results, the velocity variation was particularly prominent around the piers in the tidal channel. Erosion occurred mainly along the tidal channels near the piers, where bridge structures reduced the flow cross section, creating strong flow. In contrast, in the rear area of the structure, where the flow was relatively weak due to the formation of eddies, deposition and moderated erosion were predicted. In estuaries and coastal waters, changes in the flow environment caused by artificial structures can produce changes in the sedimentary environment, which in turn can affect the local marine ecosystem. The numerical model proposed in this study will enable systematic prediction of changes to flow and sedimentary environments caused by the construction of artificial structures.

초임계 환경에서 와류형 분사기의 극저온 질소 분사 LES 연구 (LES Investigation on The Cryogenic Nitrogen Injection of Swirl Injector Under Supercritical Envionment)

  • 강정석;허준영;성홍계;윤영빈
    • 한국항공우주학회지
    • /
    • 제44권4호
    • /
    • pp.343-351
    • /
    • 2016
  • 초임계 환경에서 작동하는 와류형 분사기의 극저온 질소 분무특성을 3차원 LES 수치기법을 적용하여 연구하였다. 초임계 상태에서 질소의 상태량을 예측하기 위해 초임계 상태에서 적용되는 상태방정식들을 비교하여 가장 정확한 SRK 상태방정식을 적용하였다. 또한 점성계수와 열 전도도는 Chung이 제안한 고압상태 혼합물에 대한 방정식을 적용하였으며 확산계수는 Fuller의 이론에 Takahashi가 제안한 방정식을 적용하였다. 질소로 채워진 50bar의 챔버에 5bar의 차압으로 질소를 분무하여 수치해석을 수행하였다. FFT를 이용한 주파수 분석을 통해 대수적 Smagorinsky와 동적 Smagorinsky를 실험결과와 비교하여 동적모델이 더 적합함을 판단하였다. 분사기 내부의 액막, 가스층에서 나타나는 불안정성과 분사기 외부에서 나타나는 불안정성의 원인에 대해 분석하고, 불안정성이 분사기 내부로 전파되는 현상에 대해 조사하였다. 또한 분무각에 대하여 실험 결과와 비교 검증하였다.