• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.529-536
• /
• 2005

Recently the building of ultra large container ship are discussed among ship building companies and ship operating company who have a tendency to pursue the advantage of large scale of economy. These tendency will be continued for the time being, if ship-building skill and economical efficiency are available. As the enlargement of container ship size becomes hot issues in ship-building markets, the needs for re-arrangement of accommodation house in large container ship are proposed carefully in some researches. This study examined economical efficiency of re-arrangement of accommodation house in ultra large container ship. The separation between accommodation and engine room is proposed through out drawing works in initial design stage and we examined the merits and demerits of the separation in the view of economical efficiency. The RFR(Required Freight Rate) is considered as the objective function to evaluate the re-designed vessel. The economical benefits are analyzed in the view of ship operator and shipyard respectively.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.338-340
• /
• 2020

Sericite is used as a raw material for ceramics and paints, and recently it is widely used as adsorbents to remove heavy metals in wastewater. A new air filter containing sericite was developed using the principle of which components contained in the sericite react with moisture in the air to release oxygen. We tested whether the newly developed air filter actually improves fuel efficiency when mounted on a diesel vehicle. When the diesel vehicle used in the test was warmed up, the fuel efficiency increased by 10~17% compared to when an existing air filter was installed. However, the effect of the developed air filter on the amount of emissions (HC, CO, NOx) has not been investigated, and further research is required for the diesel vehicle emissions.

• Journal of Korean Society on Water Environment
• /
• v.26 no.1
• /
• pp.160-167
• /
• 2010

In this research, the performance evaluation between an alternating type process and a recirculating type process was investigated by using mathematical models. The Advanced Phase Isolation Ditch (APID) process and the $A^2/O$ process were selected the target processes of the alternating type and recirculating type, respectively. For more quantitative evaluation, 5 performance indexes which included economy and energy efficiency as well as effluent quality were used, and various disturbance conditions of influent were given to the process models. As simulation results, the APID process which had the specific operation modes to use the organic matter in influent effectively showed higher efficiency of denitrification than the $A^2/O$ process. In the case of effluent TSS, the $A^2/O$ process that the retention time in reactors could be maintained stably was more effective than the APID process. In the cases of various disturbance condition, although it was identified that both two processes had similar effluent quality, the sludge production of the $A^2/O$ process showed lower than that of the APID process while the APID process showed higher energy efficiency.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.107-113
• /
• 2016

This paper proposes various policies for maximizing the performances of Government loan. In order to do so, this paper offers new 10 policies with results from analyzing a survey for the requirements of SMEs that were supported with Government loan program. Also this paper drives methods for finding new value indices and reforming formulas for quantifying some indices. On the other hand, this paper introduces financing methods using K-OTC and KONEX markets and presents three portal sites to provide information about Government sponsored loan matched to needs of an individual company. Also this paper improves the supplement points resulted from operating Government loan. In conclusion, these new policies will raise effectiveness and efficiency of Government loan programs and will contribute to achieving the goals which are establishing the foundation for growth in IT industry as well as IT SMEs, improving the quality of the national livelihood and promoting the growth of national economy.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.29-37
• /
• 2009

National R&D programs play an important role in the development of a country in this age of the knowledge economy. Since many numbers of R&D programs compete for limited resources such as national R&D budget, the R&D program evaluation problem is a challenging decision-making problem faced by decision makers that deal with R&D management. In this sense, DEA(Data Envelopment Analysis) has been regarded as one of the most widely accepted methods to measure the relative efficiency of productivity of R&D programs. DEA is a methodology to measure and to evaluate the relative efficiency of a homogeneous set of decision-making units(DMUs) in a process which uses multiple inputs to produce multiple outputs. However, the sample of the R&D programs could consist of two or more naturally occurring subsets, thus exhibiting clear signs of heterogeneity such as different objectives. In such situations, the fairness of DEA is limited, for the nature of the relative efficiency of a DMU is likely to be influenced by its membership in a particular subset of the sample. In this study, we propose a methodology AI-DEA(attainment index DEA) allowing for reflecting decision maker's subjective judgement on difference among different subsets of R&D programs which have heterogeneous objectives. This methodology combines AHP and Delphi in order to decide the attainmnet index of each DMU for each outputs, and apply them to DEA model. We illustrate the proposed approach with a pilot evaluation of 13 programs involving 6 different subsets of Korean National R&D programs and compares the results of the original DEA model and AI-DEA model.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.231-236
• /
• 2014

In this study, the changes in collection efficiencies due to the time changes of activated carbons were ascertained, and in order to identify the magnitude of adsorption, the before-use and after-use iodine adsorption values were analyzed. In addition, as a result of examining the characteristics of continuous process and non-continuous process and as a result of investigating whether the emission standards would be maintained, the continuous process and printing facilities were seen as not being able to maintain the emission standards. Also were found, in the case of non-continuous process,-taking into consideration the special nature of the job -for 4${\o}$ palletized charcoal, a collection efficiency near 50% was shown even after 96 hours. Also, when the inlet concentration was about 300ppm, it is thought that the emission standards would be maintained if the activated carbons are replaced within at least 96 hours in the case of 4${\o}$ palletized charcoal and the use was deemed pointless in the case of carbon. The results of this study are expected to provide assistance in selecting replacement periods for activated carbons and in selecting absorbents at the project sites, and are expected to be of significant help in the selection of precipitators that can collect total hydrocarbons for compliance of the emission standards.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.176-183
• /
• 2009

Distributed generation(DG) of combined cooling, heat, and power(CCHP)has been gaining momentum in recent year as efficient, secure alternative for meeting increasing energy demands. This paper presents the energy performance of microturbine CCHP system equipped with an absorption chiller by modelling it in hospital building. The orders of study were as following. 1)The list and schedule of energy consumption equipment in hospital were examined such as heating and cooling machine, light etc. 2) Annual report of energy usage and monitoring data were examined as heating, cooling, DHW, lighting, etc. 3) The weather data in 2007 was used for simulation and was arranged by meteorological office data in Daejeon. 4) Reference simulation model was built by comparison of real energy consumption and simulation result by TRNSYS and ESP-r. The energy consumption pattern of building were analyzed by simulation model and energy reduction rate were calculated over the cogeneration. As a result of this study, power generation efficiency of turbine was about 30[%] after installing micro gas turbine and lighting energy as well as total electricity consumption can be reduced by 40[%]. If electricity energy and waste heat in turbine are used, 56[%] of heating energy and 67[%] of cooling energy can be reduced respectively, and total system efficiency can be increased up to 70[%].

• Review of Culture and Economy
• /
• v.19 no.2
• /
• pp.121-146
• /
• 2016

Local governments have absolute authority for the policy and budget. So the backgrounds of local cultural foundation managers vary depending on whether the priorities are close relationship with upper institutions and organizational stability or whether the managers are asked to conduct autonomous management based on professionalism to boost the development of local culture. There are conflicting opinions about managers of local cultural foundations; some argue that administrators are desirable as they can not only maintain close relationship with the local government but also establish and maintain organizational stability. Others argue that cultural art experts are desirable for professional and effective management. However, the conflict and debate kept going on without clarifying objective facts how those completely different backgrounds, such as administrators and cultural art experts, make the characteristics of managers different. In this regard, this study divides the managers of The National Local Cultural Foundations Association into administrator group and cultural art expert group. By comparing and analyzing their characteristics, This study will enhance the professionalism and efficiency of each group.

• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.171-177
• /
• 2019

Smart farm is a breakthrough technology that can maximize crop productivity and economy through efficient utilization of space regardless of external environmental factors. This study was conducted to investigate the optimal growth and physiological conditions of Chinese matrimony vine (Lycium chinense) with LED light sources in a smart farm. The light source was composed of red+blue and red+blue+white mixed light using a LED system. In the red+blue mixed light, red and blue colored LEDs were mixed at ratios of 1:1, 2:1, 5:1, and 10:1, with duty ratios varied to 100%, 99%, and 97%. The experimental results showed that the photosynthetic rate according to the types of light sources did not show statistically significant differences. Meanwhile, the photosynthetic rate according to the mixed ratio of the red and the blue light was highest with the red light and blue LED ratio of 1:1 while the water use efficiency was highest with the red and blue LED ratio of 2:1. The photosynthetic rate according to duty ratio was highest with the duty ratio of 99% under the mixed light condition of red+blue+white whereas the water use efficiency was highest with the duty ratio of 97% under the mixed light of red+blue LED. The results indicate that the light source and light quality for the optimal growth of Lycium chinense in the smart farm using the LED system are the mixed light of red+blue (1:1) and the duty ratio of 97%.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.1
• /
• pp.93-102
• /
• 2023

Building supervision can be defined as a major task that involves managing and supervising the construction process to support the creation of high-quality results. To successfully perform supervision work, it is necessary to collect various information generated in uncertain field conditions, but today, supervision is performed based on documents such as reports, so there are limitations in collecting information. In fact, it has also been reported that the recent collapse of an apartment building in Korea was caused by limitations of information communication in th supervision work. Accordingly, this study analyzed the types of digital technologies that can be used to improve the efficiency of building supervision work, and presented the prioritized application of them. Priority application was quantitatively evaluated using analytic hierarchy process on data through a survey. It is expected that the results of this study can be used as basic data to set the roadmap of digital technology for building supervision in the future.