• 상하수도학회지
• /
• 제14권1호
• /
• pp.76-83
• /
• 2000

This research is about wastewater containing non-biodegradable TDI(Toluene Diisocyanate) that is treated by the activated carbon adsorption method. In the case of the Fenton oxidation process being applied to the existing process, optimal pH, reaction time, chemical dosing amount, removal rate, and cost were investigated. A pilot plant test was applied after finding optimal conditions with lab experiments. The optimal conditions were pH 3~5(COD removal rate 84~88%) and reaction time 30min~1hr. In higher $H_2O_2$ dosing amount, COD removal rate was a little higher. But there was little difference in the removal rate according to $FeSO_4{\cdot}7H_2O$ dosing amount. Treatment cost was economical in the case of the Fenton oxidation process being operated earlier than activated carbon adsorption system. But chemical dosing point, chemical mixing effect, chemical dosing amount, removal rate, and the cost of facility and others must be considered in practical process.

• 대한산업공학회지
• /
• 제23권1호
• /
• pp.39-54
• /
• 1997

This paper presents four process models for machining processes : 1) an economical mathematical model of machining process, 2) a prediction model for surface roughness, 3) a decision model for fuzzy cutting conditions, and 4) a judgment model of machinability with automatic selection of cutting conditions. Each model was developed the economic machining, and these models were applied to theories widely studied in industrial engineering which are nonlinear programming, computer simulation, fuzzy theory, and neural networks. The results of this paper emphasize the human oriented domain of a nonlinear programming problem. From a viewpoint of the decision maker, fuzzy nonlinear programming modeling seems to be apparently more flexible, more acceptable, and more reliable for uncertain, ill-defined, and vague problem situations.

• Architectural research
• /
• 제1권1호
• /
• pp.55-61
• /
• 1999

In reinforced concrete design, structural member sizes and amount of reinforcing steel areas are usually selected based on the structural designers' experience. Most existing charts provided for the design of reinforced concrete structural members were developed mainly based on force equilibrium conditions and some serviceability criteria. Sections selected from these charts may not result in an economic solution in terms of material costs as well as construction costs. Practical design aids are developed and suggested in this study for the economical design of reinforced concrete beam under flexural loading. With the beam width fixed, the depth of a beam, positive steel areas and negative steel areas are found from Khun-Tucker necessary conditions with Lagrangian multipliers to minimize the sectional cost of a beam. The developed design aids might be useful in selecting optimum reinforced concrete beam sections. Theoretical derivations and use of the developed design aids are described in this paper.

• 한국산림과학회지
• /
• 제4권1호
• /
• pp.30-32
• /
• 1965

Many kind tree species are growing in Korea. However most of them are inferior in wood qualities and production for commercial utilization except several species. Among the useful several species Red Pine (Pinus densiflora S. et. Z.) is growing in main tree species and most generally utilizing wood in korean forest. It is used widely as mine timbers, cross ties, boxes, floorings, pulpwoods, constructions and engineerings. Although this species is most useful and economical in this country, the basical properties on relation between wood and relative humidities were not studied certainly. This study was performed by need of inspection the hygroscopic and swelling properties to be apllied for physical manufacturing. According to the results the Equilibrium Moisture Contents of each relative humidity conditions are as table (3), and the swelling values of sap and heartwood are as table (4) and (5) in text. In this study sapwood moisture contents are higher than heartwood in each relative humidities conditions. Tangential and radial ratios of average swelling values are 1:1.971 in sapwood and 1:2.178 in heartwood.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.368-371
• /
• 2003

Leaking underground storage tanks are a major source of groundwater contamination by petroleum hydrocarbons. Bioremediation of aromatic hydrocarbons in groundwater and sediments is often limited by dissolved oxygen. Aerobic bioremediation has been highly effective in the remediation of many fuel releases, but Many aromatic hydrocarbons degrade very slowly under anaerobic conditions. Nitrate is a good alternative electron acceptor to oxygen and denitrifying bacteria are commonly found in the subsurface and in association with contaminated aquifer materials. Because nitrate is less expensive and more soluble than oxygen. it may be more economical to restore fuel-contaminated aquifers using nitrate rather than oxygen. This study show that biodegradation of BTEX and MTBE is enhanced by the nitrate-amended microcosms under aerobic/anaerobic conditons. Although aromatic hydrocarbons degrade very slowly under anaerobic conditions. Biodegradaton was observed for all of the test compounds.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.165-171
• /
• 2007

This paper proposes a new islanding detection method for inverter-interfaced distributed generators (DG). To detect islanding conditions, this paper calculates the phase angle variation of the system voltage by using the phase-locked loop (PLL) in the inverter controllers. Because almost all inverter systems are equipped with the PLL, the implementation of this method is fairly simple and economical for inverter-interfaced DGs. The detection time can also be shortened by reducing communication delay between the relays and the DGs. The proposed method is based on the fact that islanding conditions result in the frequency and voltage variation of the islanded area. The variation depends on the amount of power mismatch. To improve the accuracy of the detection algorithm, this paper injects small low-frequency reactive power mismatch to the output power of DG.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.392-396
• /
• 2003

본 연구에서는 하수처리장 반송라인으로부터 얻은 혼합미생물을 사용하여 실험실에서 회분식 실험을 실행하였으며, 산소가 제한되는 유류 오염지역 내에서의 질산염 전자수용체를 이용한 탈질 박테리아의 질산염 이용 평가와 이에 따른, 현장 적용 타당성을 검토하는데 있다. 미생물은 톨루엔(toluene)을 탄소원으로 하고 질산염을 에너지원으로 이용하는 균주로 우점화한 혼합미생물(mixed culture)을 배양하여 실험에 사용하였다. 본 실험을 통해 유류에 의해 오염된 토양의 혐기성 지역에서의전자수용체로 질산염이 존재한다면, 토착미생물에 의한 분해가 느리지만, 발생될 수 있음을 추정할 수 있었다. 또한 질산염의 유무에 따른 BTEX와 MTBE의 혼합기질의 분해 특성 및 부산물을 살펴볼 수 있었다.

• 설비공학논문집
• /
• 제23권6호
• /
• pp.430-440
• /
• 2011

The purpose of this study was to investigate the interactions between the thermal factors in existing thermal control methods and to find out the control logic that can create more comfortable thermal conditions. For it, four thermal control logics were developed：conventional temperature-based control; temperature-based and humidity-based control; PMV-based control; and TS-based control. Their performance was comparatively tested in the U.S. typical 5-story office building in two climate zones (Detroit, Michigan and Miami, Florida) for two seasons (winter and summer) incorporating IBPT (International Building Physics Toolbox) and Matlab/Simulink. Analysis on the thermal conditions and energy efficiency revealed that each control logic created comfortable conditions for their respective target, i.e., temperature, humidity, PMV or TS, but uncomfortable for others (e.g., temperature-based control logic maintained PMV or TS uncomfortably or vise versa). In addition, energy efficiency was significantly different by logics. In conclusion, it can be said that the overall thermal comfort can be improved by the adoption of the PMV and TS as a target variable and their economical benefits are expected in the hotter climate zones with the reduced cooling and dehumidifying energy consumptions.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.427-433
• /
• 2015

Hot forging industry workers are prone to encounter several health risks due to lack of automation and poor working environment conditions. These workers particularly suffer from muscle fatigue owing to the constant handling of heavy products during the forging process. Thus we developed an assistant robot for workers who carry out hot forging tasks. The purpose of a robot is to compensate gravity-loads for heavy products. To verify the functionality of a robot, we performed a muscle fatigue analysis using Electromyography (EMG) signals. Four muscles of the upper extremity were chosen to measure muscle activity. And experiment conditions were setup to imitate the hot forging process. Post experimental analysis of the captured muscle activity revealed a reduction in the median frequency of the EMG signals, which means clear fatigue reduction due to a robot's assistance. The developed assist robot with compact and economical components can be efficiently utilized at forging work sites to create better working conditions for operators.

• 한국물환경학회지
• /
• 제21권1호
• /
• pp.34-39
• /
• 2005

The performance of elutriated acid fermentation with slurry-type piggery waste was investigated, especially to evaluate the effects of temperature and pre-treatment. In the first phase, the acid elutriation reactor with piggery waste after centrifugation operated at both mesophilic and thermophilic conditions to evaluate the effect of temperature. Solubilization yield($gVFAs/gSCOD_{prod.}$) and acidification rate($gVFAs/gSCOD_{prod.}$) in the thermophilic digestion were 0.45 and 0.55, which were higher than those of the mesophilic digestion, 0.25 and 0.45. In addition, the acid elutriation reactor at thermophilic temperature is more effective in removing e-coli. In the second phase, the acid elutriation reactor was fed with piggery waste before centrifugation. With piggery wastes before centrifugation, the solubilization yield and the acidificaton rate were 0.40 and 0.80, respectively, which were higher than the rates using piggery waste after centrifugation at both mesophilic and thermophilic conditions. The higher sludge volume reduction of 80% benefits sludge management. Furthermore, economical advantages can be achieved by removing the pre-treatment process, such as centrifugation. Consequently, the treatment with piggery waste before centrifugation proved to be effective. Also, the optimum temperature condition was estimated at mesophilic or thermophilic conditions, considering solubilization yields and acidification rates, though the system should be heated.