• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.75-80
• /
• 2002

The purpose of this study is to conduct researches on the aspects of reconstruction and remodeling of low-rise, dilapidated apartment buildings in the provinces, using comparative methodologies, consequently coming up with the findings in the following. 1) Unlike the rebuilding projects in which the movement process tends to be made in a bulk (in a simultaneous manner), it turns out that when it comes to remodeling, it would be advisable to attempt moving the inhabitants as a group either by the size of their residence or by the building. 2) Given the peculiarities of the construction management mechanism, remodeling projects might seem disadvantageous on the part of the management on account of inadequate accumulation of information and experience. Hence, based on the impeccable assessment of the current status of the subject buildings from the phase of planning, its imperative to closely look into and take into consideration a variety of direct and/or indirect factors in advance of the implementation. 3) A series of comparative researches from the perspective of economical efficiency that remodeling projects appear profitable considering the overall costs including financial expenses, varied taxes, and so on that will be eventually brought forth during the reconstruction period, and all the more so when allowing for the consequential effects which they ought to have upon the natural and human resources, environmental and ecological condition, business potentials, etc. Amelioration to be desired on the basis of the findings above.

• Computers and Concrete
• /
• v.16 no.1
• /
• pp.141-161
• /
• 2015

A significant portion of residential areas of Turkey is located in active earthquake zones. In Turkey occurred major earthquakes in last twenty years, such as Erzincan (1992), Kocaeli and $D{\ddot{u}}zce$ (1999), $Bing{\ddot{o}}l$ (2003), Van (2011). These earthquakes have demonstrated that reinforced concrete (RC) buildings having horizontal and vertical irregularities are significantly damaged, which in turn most of them are collapsed. Architectural design and arrangement of load-bearing system have important effect on RC building since architectural design criteria in design process provide opportunity to make this type of buildings safer and economical under earthquake loads. This study aims to investigate comparatively the effects of weak story irregularity on earthquake behavior and rough construction costs of RC buildings by considering different soil-conditions given in the Turkish Earthquake Code. With this aim, Sta4-CAD program based on matrix displacement method is utilized. Considering that different story height and compressive strength of concrete, and infill walls or their locations are the variables, a set of structural models are developed to determine the effect of them on earthquake behavior and rough construction costs of RC buildings. In conclusion, some recommendations and results related to making RC buildings safer and more economical are presented by comparing results obtained from structural analyses.

• Steel and Composite Structures
• /
• v.2 no.3
• /
• pp.209-222
• /
• 2002

This paper describes the buckling phenomenon of a tubular truss with unsupported length through a full-scale test and presents a practical computational method for the design of the trusses allowing for the contribution of torsional stiffness against buckling, of which the effect has never been considered previously by others. The current practice for the design of a planar truss has largely been based on the linear elastic approach which cannot allow for the contribution of torsional stiffness and tension members in a structural system against buckling. The over-simplified analytical technique is unable to provide a realistic and an economical design to a structure. In this paper the stability theory is applied to the second-order analysis and design of the structural form, with detailed allowance for the instability and second-order effects in compliance with design code requirements. Finally, the paper demonstrates the application of the proposed method to the stability design of a commonly adopted truss system used in support of glass panels in which lateral bracing members are highly undesirable for economical and aesthetic reasons.

• Computers and Concrete
• /
• v.17 no.5
• /
• pp.579-596
• /
• 2016

This paper describes a method of the refined plastic hinge approach in the framework of the higher-order element formulation that can efficaciously evaluate the limit state capacity of a whole reinforced concrete structural system using least number of element(s), whereas the traditional design of a reinforced concrete structure (i.e. AS3600; Eurocode 2) is member-based approach. Hence, in regard to the material nonlinearities, the efficient and economical cross-section analysis is provided to evaluate the element section capacity of non-uniform and arbitrary concrete section subjected to the interaction effects, which is helpful to formulate the refined plastic hinge method. In regard to the geometric nonlinearities, this paper relies on the higher-order element formulation with element load effect. Eventually, the load redistribution can be considered and make full use of the strength reserved owing to the redundancy of an indeterminate structure. And it is particularly true for the performance-based design of a structure under the extreme loads, while the uncertainty of the extreme load is great that the true behaviour of a whole structural system is important for the economical design approach, which is great superiority over the conservative optimal strength of an individual and isolated member based on traditional design (i.e. AS3600; Eurocode 2).

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.167-178
• /
• 2007

In general, it is known that the concrete ballast track is possible to reduce a cost of maintenance activities cause of maintenance free by restrictive maintenance in application of track ballast structures. However, if deteriorations and fracture mechanism of a material are considered, proper maintenance activities and repairing are continually required. For the problems, we evaluated an economical efficiency of the gravel ballast and the concrete ballast on a proper level of maintenance activities. As the method based on history path is difficult to obtain sufficient reliabilities cause of an absence of real data for maintenance activities, we chose the delphi survey method by professional group, and we obtained the appropriate index and profiles for maintenance activities. As a result, we founded that effects for cost reduction can be expected by preventive maintenance management, and we proposed economical restrictions and life cycle cost for track ballast structures in a life cycle.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.2
• /
• pp.323-334
• /
• 2002

Purpose: This study was designed to analyse economical efficiency of home care service by comparing a cost-effectiveness ratio(CER) between hospitalization and home care service. Method: The analytic framework of this study was constructed in 5 stages; perspective of the analysis, measurement of costs, measurement of effects, analysis of CER, and sensitivity analysis. The SAS program was utilized for the general characteristics of the subjects, descriptive statistics, homogeneous test, normality test and difference test. Result: The results were as follows; 1) CER was 35,248,256 of ADL, 7,996,026 of nursing satisfaction, 6,144,946,000 of QALY of patients in the hospital and 11,168,863 of ADL, 2,322,239 of nursing satisfaction, 3,674,556,000 of QALY of patients in the home care center. ICER was 438,067,932 of ADL, -190,044,176 of nursing satisfaction, 8,615,336,000 of QALY. 2) In the sensitivity analysis of sex, age and discount rate, the CER of patients in the home care center was lower than the CER of patients in the hospital. Conclusion: With these findings, it affirmed that home care service had an economical efficiency compared with hospitalization in cerebrovascular disease patients. Therefore, these results will be used to develop governmental policy or expansion of the home care service.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.90-100
• /
• 2020

Our overall society circulates in line with the economical situations characterized by production and consumption and companies play the role of providing products and services, thus taking very significant responsibilities for the socioeconomical and cultural aspects in society. Therefore, when designers attempt to think of a way to enable companies and society to share their values and propose specific concepts and visualize outcomes, it is very critical to be able to understand economical philosophy and management strategies that interconnect companies with society and seek out proper design approaches. Recently, the world's enterprise and management culture tend to connect products and services provided by companies through chains of social values. Based on the abovementioned shift in the management paradigm, the researcher investigates and analyzes actual cases of attempts by Samsung Electronics to achieve its social impacts and studies actual roles and approaches of in-house designers with creativity and insights of humanity with regard to these attempts. Each case is selected from various fields such as the company's products and service development, business systems, culture, and external strategies and the ultimate goal is to learn about actual insights and approaches of designers to make contributions to the company's management with social impacts. Especially, humanity and creative thinking of many designers working in the manufacturing industry can have significant contributions to achieving its management with social impacts and effects of sustainable management.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.595-598
• /
• 2010

Many economical and efficient methods such as sand drain method(SD), plastic board drain(PBD), sand compaction pile, vacuum consolidation method, etc., have been used for soft grounds. The case of sand compaction pile has an effect on accelerating consolidation and increasing bearing capacity by penetration at regular intervals under soft grounds for reducing the drainage path. But, this method has caused not only the nature damage by extracting the sands indiscreetly but also the economical problem for importing the sands because it needs so much sand to make the sand compaction pile. Thus, this study choosed the bottom ash which has similar engineering characteristics with sand. It was performed that clogging test and large direct shear test changing the bottom ash replacement ratio in soft ground for studying strength characteristics of soft ground using bottom ash compaction pile. As a result of the test, the internal friction angle was largely increased and the cohesion was decreased as the replacement ratio increased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.474-481
• /
• 2010

Because international environmental and energy problems such as global warming and ozone depletion, exhausting of fossil energy sources are more serious than before, renewable energy system is attracting people's attention more and more. Organic waste bioenergy system among a variety of renewable energy system is expected to have an effect on building a society which is eco-friendly and recycles resources owing to carbon neutral effects. So this is considered as the role of an energy source of the building. Previous studies on the organic waste bioenergy are mainly bioenergy technology and activation plan of the bioenergy supply. But the performance evaluation studies of bioenergy systems installed in buildings are rarely. This study is to evaluate applicability of the organic waste bioenergy system as the building energy supply system by energy and environmental, economical analysis.

• Korean Journal of Agricultural Science
• /
• v.39 no.4
• /
• pp.595-602
• /
• 2012

Main objective is to examine visitors the image, awareness of Saemangeum to examine its image, awareness, expected projects, and areas of improvement. This can establish measures for publicity and nation-wide participation. Main results are as following. First, visitors are broadly distributed to all age groups. Majority of visiting is travel and rate of returning visit is high as well. Second, the Saemangeum project is positively recognized and it is expected to be a prime development of the west coast in the future. Third, TV has significantly contributed to the visit to Saemangeum but the internet has larger effects in younger generations. Furthermore, rest and experience facilities, accommodations, and food items are major areas of improvement. Fourth, visitors have high expectations for tours, leisure, and ecosystems. Therefore, efforts should be made to become the Mecca of greed-development and cultural tourism. Fifth, many people replied that Saemangeum is an assistance to the national development but water quality management should be continued. In addition, the public participation should be made centrically cultural and economical participations.