• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.2
• /
• pp.93-101
• /
• 2024

Code-compliant seismic design should be essentially applied to realize the so-called emulative performance of precast concrete (PC) lateral force-resisting systems, and this study developed simple procedures to design precast industrial buildings with intermediate precast bearing wall systems considering both the effect of seismic and blast loads. Seismic design provisions specified in ACI 318 and ASCE 7 can be directly adopted, for which the so-called 1.5S_y condition is addressed in PC wall-to-wall and wall-to-base connections. Various coupling options were considered and addressed in the seismic design of wall-to-wall connections for the longitudinal and transverse design directions to secure optimized performance and better economic feasibility. On the other hand, two possible methods were adopted in blast analysis: 1) Equivalent static analysis (ESA) based on the simplified graphic method and 2) Incremental dynamic time-history analysis (IDTHA). The ESA is physically austere to use in practice for a typical industrial PC-bearing wall system. Still, it showed an overestimating trend in terms of the lateral deformation. The coupling action between precast wall segments appears to be inevitably required due to substantially large blast loads compared to seismic loads with increasing blast risk levels. Even with the coupled-precast shear walls, the design outcome obtained from the ESA method might not be entirely satisfactory to the drift criteria presented by the ASCE Blast Design Manual. This drawback can be overcome by addressing the IDTHA method, where all the design criteria were fully satisfied with precast shear walls' non-coupling and group-coupling strength, where each individual or grouped shear fence was designed to possess 1.5S_y for the seismic design.

• Korean Journal of Materials Research
• /
• v.34 no.5
• /
• pp.254-260
• /
• 2024

This study is to manufacture a titanium dioxide (TiO₂) photocatalyst by recycling sludge generated using titanium tetrachloride (TiCl₄) as a coagulant. Compared to general sewage, a TiCl₄ coagulant was applied to dyeing wastewater containing a large amount of non-degradable organic compounds to evaluate its performance. Then the generated sludge was dried and fired to prepare a photocatalyst (TFS). Scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), and nitrogen oxide reduction experiments were conducted to analyze the surface properties and evaluate the photoactive ability of the prepared TFS. After using titanium tetrachloride (TiCl₄) as a coagulant in the dyeing wastewater, the water quality characteristics were measured at 84 mg/L of chemical oxygen demand (COD), 10 mg/L of T-N, and 0.9 mg/L of T-P to satisfy the discharge water quality standards. The surface properties of the TFS were investigated and the anatase crystal structure was observed. It was confirmed that the ratio of Ti and O, the main components of TiO₂, accounted for more than 90 %. As a result of the nitric oxide (NO) reduction experiment, 1.56 uMol of NO was reduced to confirm a removal rate of 20.60 %. This is judged to be a photocatalytic performance similar to that of the existing P-25. Therefore, by applying TiCl₄ to the dyeing wastewater, it is possible to solve the problems of the existing coagulant and to reduce the amount of carbon dioxide generated, using an eco-friendly sludge treatment method. In addition, it is believed that environmental and economic advantages can be obtained by manufacturing TiO₂ at an eco-friendly and lower cost than before.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.123-130
• /
• 2024

Objective: Beef of Jeju black cattle (JBC) is considered as a healthy meat type due to its significantly higher unsaturated fatty acids (UFA). Lipid (e.g., UFA) is highly susceptible to oxidizing agents, which results in the quality deterioration and economic value loss of meat products. Therefore, development and application of novel preservative techniques is necessary to improve the shelf-life stability of high-UFA beef. The objective of this study was to assess the applicability of chitosan-based coatings in preservation of JBC beef. Methods: Different coating solutions: 2% chitosan alone, and 2% chitosan containing 0.1% or 0.3% gallic acid were prepared to investigate their applicability in preservation of fresh beef during storage. Jeju black cattle beef (2-cm thick steaks) were non-coated (control) or coated with the above coating solutions, placed on trays, over-wrapped with plastic film and stored at 4℃. The microbiological indices, color, total volatile basic nitrogen (TVBN) and lipid oxidation of the beef were investigated after 1, 10, and 21 days of storage. Results: Coating with 2% chitosan alone reduced the spoilage bacteria count, TVBN and thiobarbituric acid reactive substances levels in the beef compared with control during storage (p<0.05). Noticeably, coating with 2% chitosan containing 0.1% or 0.3% gallic acid was more effective on retardation of spoilage bacteria growth, lipid oxidation and discoloration in the beef compared to the chitosan coating alone over the storage period (21 days) (p<0.05). Conclusion: Taken together, the combined chitosan and gallic acid coating could be used as a bio-preservative technique in the meat industry.

• Women's Health Nursing
• /
• v.30 no.1
• /
• pp.41-55
• /
• 2024

Purpose: This review explored the status of publications on intimate partner violence (IPV) against pregnant women in contemporary China. Methods: The PubMed, Cochrane Library, Embase, CINAHL, and PsycInfo databases were searched using the terms "IPV," "pregnant woman," "Chinese," and synonyms in English, along with related keywords for Chinese publications. All literature pertaining to IPV during pregnancy, conducted in China, and published between 1987 and September 2023 was included. Results: A total of 37 articles from 30 studies were selected. The prevalence of IPV during pregnancy ranged from 2.5% to 31.3%, with psychological violence being the most common form. Frequently identified risk factors included unintended pregnancy, poor family economic conditions, male partners engaging in health risk behaviors, poor employment status of women or their partners, low education levels among women, physical or mental health issues, strained couple relationships, and in-law conflicts. IPV during pregnancy primarily led to mental health problems for the victims and could result in adverse obstetric outcomes, as well as negative effects on the temperament and development of the offspring. Victims in China demonstrated a low willingness to seek help from professionals. Furthermore, relevant research in mainland China is scarce, with a limited number of studies and non-standardized research methodologies. Conclusion: Future research should investigate IPV in pregnancy from various perspectives, identify factors unique to IPV during pregnancy, and focus on high-risk groups. Considering the conditions in China, there is a pressing need to increase public awareness of IPV and to investigate interventions aimed at addressing this issue.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.175-182
• /
• 2013

In this paper, the simulation model of house price is presented on the basis of pricing mechanism between the demand and the supply of apartments in seoul. The algorithm of house price simulation model for calculating the rate of price over time includes feedback control theory. The feedback control theory consists of stock variable, flow variable, auxiliary variable and constant variable. We suggest that the future price of apartment is simulated using mutual interaction variables which are demand, supply, price and parameters among them. In this paper we considers three items which include the behavior of apartment price index, the size of demand and supply, and the forecasting of the apartment price in the future economic scenarios. The proposed price simulation model could be used in public needs for developing a house price regulation policy using financial and non-financial aids. And the quantitative simulation model is to be applied in practice with more specific real data and Powersim Software modeling tool.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.137.1-137.1
• /
• 2010

For Indonesia, sustainable energy supply is an important factor to preserve the stable economic growth. One important strategy is development of renewable energy, which has not been fully exploited yet. The paper examines the potency of renewable energy in Indonesia. Currently, biomass composes 23% of total primary energy supply, while geothermal and hydropower has a combined share of 3%. But according to the overall potency of renewable energy, hydropower is found to have the highest available resource of 76 GW, followed by biomass and geothermal by 49.81 GW and 28.53 GW, respectively. Although the solar radiation is only at modest level ($4.80kWh/m^2/day$), the tropical all year sunlight can boost the competitiveness of solar photovoltaic and thermal application. As for wind energy, the average speed of 3-6 m/s requires the development of low speed wind turbine. The examination of electricity and petroleum product prices through international comparison for non-OECD countries shows fifth lowest price level for both of petroleum products and electricity for industrial use. As for household electricity price, Indonesia is placed the second among all the countries compared. The energy subsidy and price structure are examined in detail because it could be a source of hindrance to renewable energy promotion. The examination of renewable energy potency in this study could provide insights about recent development of renewable energy in Indonesia. As an outcome of policy examination, the price comparison analysis suggests Indonesia to reduce or even remove the energy subsidies in the long run. These findings can be utilized to formulate effective policies for renewable energy promotion.

• Microbiology and Biotechnology Letters
• /
• v.29 no.1
• /
• pp.1-11
• /
• 2001

Lactic acid bacteria (LAB) are widely used for various food fermentation. With the recent advances in modern biotechnology, a variety of bio-products with the high economic values have been produced using microorganisms. For molecular cloning and expression studies on the gene of interest, E. coli has been widely used mainly because vector systems are fully developed. Most plasmid vectors currently used for E, coli carry antibiotic-resistant markers. As it is generally believed that the antibiotic resistance markers are potentially transferred to other bacteria, application of the plasmid vectors carrying antibiotic resistance genes as selection markers should be avoided, especially for human consump-tion. By contrast, as LAB have some desirable traits such that the they are GRAS(generally recognized as safe), able to secrete gene products out of cell, and their low protease activities, they are regarded as an ideal organism for the genetic manipulation, including cloning and expression of homologous and heterologous genes. However, the vec-tor systems established for LAB are stil insufficient to over-produce gene products, stably, limiting the use of these organisms for industrial applications. For a past decade, the two popular plasmid vectors, pAM$\beta$1 of Streptococcus faecalis and pGK12 theB. subtilis-E. coli shuttle vector derived from pWV01 of Lactococcus lactis ssp. cremoris wg 2, were most widely used to construct efficient chimeric vectors to be stably maintained in many industrial strains of LAB. Currently, non-antibiotic markers such as nisin resistance($Nis^{r}$ ) are explored for selecting recombi-nant clone. In addition, a gene encoding S-layer protein, slp/A, on bacterial cell wall was successfully recombined with the proper LAB vectors LAB vectors for excretion of the heterologous gene product from LAB Many food-grade host vec-tor systems were successfully developed, which allowed stable integration of multiple plasmid copies in the vec-mosome of LAB. More recently, an integration vector system based on the site-specific integration apparatus of temperate lactococcal bacteriophage, containing the integrase gene(int) and phage attachment site(attP), was pub-lished. In conclusion, when various vector system, which are maintain stably and expressed strongly in LAB, are developed, lost of such food products as enzymes, pharmaceuticals, bioactive food ingredients for human consump-tion would be produced at a full scale in LAB.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.155-166
• /
• 1992

In dentistry, precious metal alloys are, mainly due to economic factors, increasingly displaced by alternatives containing Ni-Cr-Co. There are some reports where hypersensitive reactions to Ni-Cr-Co alloys are presented and discussed. The reactions reported vary from mucosa contact stomatitis to generalized dermatitis without any oral mucosal reaction. The purpose of this study was to investigate the incidence of nickel, chrome, cobalt and copper, and to know whether subjects with positive skin reaction to nickel would also demonstrate adverse intraoral reaction to a non-precious metal nickel. The patch tests were performed in 81 subjects(male 39, female 42) and nickel sulfate 5% aq., potassium bichromate 0.5% at., cobalt chloride 2% aq., & copper sulfate 1% aq., were used for test allergens. And then the intraoral tests were performed in 16 subjects, 8 subjects with positive allergic skin reaction to nickel and 8 subjects with negative allergic skin reaction. A pure metallic nickel plate was attached to the buccal side of the upper second premolar. The results are as follows : 1. The frequency of nickel sensitivity was 9.9% (2 men, 6 women), cobalt was 4.9% (1 man, 3 women), and chrome was 2.5% (2 men) respectively and there was no positive reaction to copper 2. The positive reactions were 8 of 23 (34.8%) with a history of jewelry allergic reactions and 3 of 58 (5.1%) without a history of jewelry allergic reactions. 3. Three of 8 subjects with positive skin reaction. gave reactions to the metal plates.

• Korean Journal of Social Welfare
• /
• v.60 no.4
• /
• pp.55-77
• /
• 2008

After the economic crisis of Korea, the character of Korean Poverty has changed. Most notably, many people are working but poor. Therefore it is important to understand the characteristics of the working poor, especially the unstable work experiences of the working poor since one of the causes of poverty is that. Prior research about the working poor has not fully proven this issue. This study is to examine the job sequences of the working poor. Thus I utilized the KLIPS(Korea Labor and Income Study), and analyzed it by event sequence analysis and optimal matching methods. The job sequences are divided as follows: total years of working in the labor market, the number of gaps and the length of gaps in their careers, and the characteristics of experienced jobs since they have entered the labor market from age 15. As a result, there are no statistically significant in the total years of working in the labor market. And the number of gaps and the length of gaps in their careers, and the characteristics of experienced jobs show that working poor have been experiencing more unstable than non-poor. Thus, almost all of the male working poor has unstable jobs their whole lives, and the female working poor's job sequences show distinct features according to women's life course. These results can give political implications to the anti-poverty policy in Korea.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.495-500
• /
• 2019

Foreign object debris (FOD) is a generic term for various metals and non-metal foreign object and materials with potential hazards to aircraft operations. Since the method of manual FOD detection and collection in the aircraft moving area is very low in efficiency and economic efficiency, it is essential to develop to FOD automatic detection system suitable for domestic environment. This paper is the result of the performance comparison test results of the two systems for the combined operation of each optimal detection time and 95% accuracy above 100 m for complex operation using the fixed FOD automatic detection system and the mobile FOD system using EO/IR camera and radar at Taean Airfield Hanseo University. It is expected that FOD can be performed unattended through continuous R & D.