• Korean Journal of Veterinary Research
• /
• v.57 no.3
• /
• pp.175-180
• /
• 2017

Porcine parvovirus, Erysipelothrix (E.) rhusiopathiae, and Leptospira (L.) interrogans are considered major etiologic agents of reproductive failure in pigs, causing economic loss in the swine industry. In this study, the safety and immunogenicity of a new octavalent inactivated vaccine were evaluated. The vaccine contained inactivated porcine parvovirus, E. rhusiopathiae, and six L. interrogans serovars (Bratislava, Canicola, Grippotyphosa, Hardjo, Icterohaemorrhagiae, and Pomona). Safety test results showed no notable side effects or clinical signs after vaccination in mice, guinea pigs, and sows. In addition, we assessed immunogenicity of the vaccine in 25 sows under field conditions. The vaccinated group (n = 20) had a significantly higher antibody level than the non-vaccinated group (n = 5). Moreover, the stillbirth rate decreased in piglets born from vaccinated sows, resulting in an increased fertility rate. The results of this study demonstrate that the new octavalent inactivated vaccine can be applied safely and effectively to improve reproductive performance in sows.

• Journal of Periodontal and Implant Science
• /
• v.41 no.5
• /
• pp.248-252
• /
• 2011

Purpose: The anterior region is a challenge for most clinicians to achieve optimal esthetics with dental implants. The provisional crown is a key factor in the success of obtaining pink esthetics around restorations with single implants, by soft tissue and inter-proximal papilla shaping. Provisional abutments bring additional costs and make the treatment more expensive. Since one of the aims of the clinician is to reduce costs and find more economic ways to raise patient satisfaction, this paper describes a practical method for chair-side fabrication of non-occlusal loaded provisional crowns used by the authors for several years successfully. Methods: Twenty two patients (9 males, 13 females; mean age, 36,72 years) with one missing anterior tooth were treated by using the presented method. Metal definitive abutments instead of provisional abutments were used and provisional crowns were fabricated on the definitive abutments for all of the patients. The marginal fit was finished on a laboratory analogue and temporarily cemented to the abutments. The marginal adaptation of the crowns was evaluated radiographically. Results: The patients were all satisfied with the final appearance and no complications occurred until the implants were loaded with permanent restorations. Conclusions: The use of the definitive abutments for provisional crowns instead of provisional abutments reduces the costs and the same results can be obtained.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.264-265
• /
• 2014

Currently, CO₂ existed in the air usually reacts concrete, and then CaCO₃ can be appeared. As time goes by, pH of concrete is decreased and corrosion of steel can be happened. This phenomenon is called carbonation. For preventing carbonation of concrete, various methods like using corrosion inhibitor, high compressive strength concrete, and enough covering depth are adopted. But these method are usually passive methods focused on corrosion of steel and have limitation on economic. Thus, as basic study for active method of carbonation, cement pastes with CO₂ reactive material (γ-C₂S, MgO) and GBFS were in accelerated carbonation, and the compressive strengths were measured. On the result, the compressive strength was improved better than non-carbonation. Through measuring the weight change using TG-DTA, as specimens were carbonated, according to decreasing of Ca(OH)₂ and Mg(OH)₂, CaCO₃ and MgCO₃ were increased. Therefore it can be shown that carbonation curing can be realized.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.187-195
• /
• 2020

Purpose: The purpose of this study is to examine decision factors to start orthodontic treatment with male and female undergraduates having experience in orthodontic treatment at a dental clinic or hospital because of malocclusion. Methods: A survey was carried out to investigate decision factors to begin orthodontic treatment with 330 male and female undergraduates attending universities located in Daegu Metropolitan City or Gyeongsangbuk-do who had experience in orthodontic treatment at a dental clinic or hospital because of malocclusion, and out of 330 questionnaire sheets, total 294 (89.1%) sheets were employed for analysis after excluding ones unreliably or erroneously answered. Results: According to the results of analyzing decision factors for orthodontic treatment, such factors as 'a dentistry-related person's suggestion', 'feeling necessity on one's own' are found to be significantly higher in students majoring in health units than those having non-dental health majors, and students residing in small and medium cities are influenced more significantly by this decision factor, 'an acquaintance's suggestion', than those living in farming and fishing villages or big cities, and students who started orthodontic treatment at elementary school were more significantly influenced by the factor, 'feeling necessity through the public media'. Conclusion: Among the factors influencing their decision on orthodontic treatment, no influence was found in sexual difference, and each of the decision factors influenced them considerably according to the difference of their residence, economic power, majors, or time to start orthodontic treatment.

• Earthquakes and Structures
• /
• v.18 no.3
• /
• pp.285-296
• /
• 2020

Dams are important structures for management of water supply for irrigation or drinking, flood control, and electricity generation. In seismic regions, the structural safety of concrete gravity dams is important due to the high potential of life and economic loss if they fail. Therefore, the seismic analysis of existing dams in seismically active regions is crucial for predicting responses of dams to ground motions. In this paper, earthquake response of concrete gravity dams is investigated using the finite element (FE) method. The FE model accounts for dam-water-foundation rock interaction by considering compressible water, flexible foundation effects, and absorptive reservoir bottom materials. Several uncertainties regarding structural attributes of the dam and external actions are considered to obtain the fragility curves of the dam-water-foundation rock system. The structural uncertainties are sampled using the Latin Hypercube Sampling method. The Pine Flat Dam in the Central Valley of Fresno County, California, is selected to demonstrate the methodology for several limit states. The fragility curves for base sliding, and excessive deformation limit states are obtained by performing non-linear time history analyses. Tensile cracking including the complex state of stress that occurs in dams was also considered. Normal, Log-Normal and Weibull distribution types are considered as possible fits for fragility curves. It was found that the effect of the minimum principal stress on tensile strength is insignificant. It is also found that the probability of failure of tensile cracking is higher than that for base sliding of the dam. Furthermore, the loss of reservoir control is unlikely for a moderate earthquake.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.2
• /
• pp.220-225
• /
• 2000

A general household survey was carried out in the village of Sonoageng in East Java, Indonesia with the aim to assess their socio-economic status, and the crop and livestock production system prevailing in the area. Of the households interviewed (164), 52% are landless, 35% own land or have a combination of own and shared land, and 12% do not own land but have access to land by sharing. Nearly two thirds (65%) of the households raise cattle; most of them own animals, 8% reared shared animals only. The dominant crop was rice; other crops grown were soya bean, groundnut, maize and sugar cane. Nearly half (47%) the household income was derived from off-farm work (non-agricultural activities), 33% from crops, 13% from livestock (mainly cattle), and 7% from agricultural labour. Most households kept 1 to 2 animals and only 21 out of 164 households earned more than Rp. 500,000 (~250 US$) per annum from livestock. The most prevalent type of livestock production in the area could be characterized as small-scale cow/calf operation, either by landless households or those with <0.4 ha of land.

• Journal of the Korean Geographical Society
• /
• v.38 no.4
• /
• pp.562-574
• /
• 2003

This study examines the emerging global city-regions theory and suggests its implications for regional development policy in Korea. Global city-regions defined as an economic and political organization of metropolitan regions or a new scale of urban organization with polycentric structure, is appreciated as a new regionalist model of development in the globalization era. In Korea, the application of global city-regions model is required particularly for strengthening the international competitiveness of metropolitan areas except the capital region including Seoul, and resolving inequalities between the capital region and non-capital regions. However, Institutional revolution including consolidation of Shi(metropolitan area) and Do(province), and devolution should be preceded above all things to develop metropolitan cities such as Busan, Daegu, Gwangju, and Daejeon toward global city-regions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.954-960
• /
• 2012

Nowadays, rapidly changing and unstable global economic environments request a lot of roles to engineers. In this situation, product should be designed to make more profit by cost down and to satisfy distinguished performance comparing to other competitive ones. In this research, the optimization design of the industrial robot casting will be done. The weight and deflection have to be reduced as objective functions and stress has to be constrained under some constant value. To reduce time cost, CCD (Central Composite Design) will be used to make experimental design. And RSM (Response Surface Methodology) will be taken to make regression model for objective functions and constraint function. Finally, optimization will be done with Genetic Algorithm. In this problem, the objective functions are multiple, so NSGA-II which is brilliant and efficient for such a problem will be used. For the solution quality check, the diversity between Pareto solutions will be also checked.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.5
• /
• pp.332-341
• /
• 2020

Objectives: The purpose of this study was to investigate the association between the Basic Old-Age Pension (BOP), which is a non-contributory pension, and depression in BOP beneficiaries in Korea. Methods: We used the second and third waves (2007-2008) of the Korea Welfare Panel Study to identify the effect of the BOP on mental health in the year of its introduction. The Center for Epidemiological Studies-Depression Scale, applied in a Korean context, was used to evaluate mental health. To analyze the effect of the BOP, a difference-in-difference approach was used in analyses of all subjects and subgroups. Results: For this study population of 760 adults, the BOP did not have a statistically significant relationship with depression in its beneficiaries. After controlling for type of household, the BOP was still not associated with lower reporting of depression, either in single-beneficiary or double-beneficiary households, in the year of the benefit. Conclusions: The BOP policy had no significant relationship with the level of depression among recipients. However, this should not be interpreted as implying that income subsidy programs for older adults, such as the BOP, do not affect mental health, considering the importance of economic hardship in this population and the program's socioeconomic effects.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.213-224
• /
• 2020

The study assesses the impact of trade liberalization factors on changes in customs revenues in Vietnam. Research data was conducted between 2002 and 2017 on the official website of the Government's Web Portal and The World Bank. This paper uses the vector error correction model to estimate the short-term and long term relationship between data series. The results have proven that tariff reductions have a positive effect on short-term and long-term customs revenues in Vietnam. However, the implementation of other international commitments on trade liberalization has positive short-term and long-term negative impacts on customs revenues in Vietnam. The study's results also show that exchange rate has no effect on changes in customs revenues in the short term but it has a strong impact on increasing customs revenues in the long run. Based on these findings, the article also suggests a number of policies to ensure customs revenues in Vietnam in future. In order to ensure customs revenues, the government of Vietnam should: (1) having some policy to improve the efficiency of customs management in Vietnam; (2) Building appropriate VND exchange rate policy; (3) Establishing reasonable non - tariff barriers to prevent fraud and ovations cause losses in customs revenues.