• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.492-507
• /
• 2010

The eco-design in modem fashion is mixed with a well-being trend that combines functionality and ethics with technology to suggest a new fashion style for the $21^{st}$ century. This study analyzes the colors of the eco-design in the current fashion trends and identifies the eco-friendly color images that suggest directions for eco-design. The results of this study are as follows. First, the eco-design is an ethical design concept of the ecological value. It can be classified into the functional efficiency in the multi-functionality the sustainability, the recycling capability, the trends for health and craftsmanship, according to various suggestions by eco-design related theorists. Second, the eco-colors shown in the fashion trend follow the order of YR, R, Y, N, and B, with the order of the pale, grayish, light grayish and dull tones. Third, the hue trends of eco-colors each eco-type are focused on R, YR, and Y. With regards to the tones, the functional efficiency, the multi-functional capability, and the sustainability are shown in the neutral tone, while the recycling capability is shown in the grayish tone and the trends pursuing health and craftsmanship are shown in the pale tone.

• KIEAE Journal
• /
• v.15 no.3
• /
• pp.21-28
• /
• 2015

Purpose: In this study, we analyzed the energy performance levels and high-performance technology trends through the case studies of foreign high-performance buildings. Method: Buildings built within 10 years were selected for the analysis of recent trends. we analyzed the buildings of U.S.A, Germany and Japan using LEED certified buildings, Passive House certified buildings and CASBEE certified buildings database for the case study of foreign high-performance buildings. A total of 20 high-performance buildings including 14 cases in U.S.A, 4 cases in Germany and 4 cases in Japan were selected. Annual energy consumption levels for 20 high-performance buildings were collected with the actual energy consumption data or data from simulation programs officially recognized by DOE. Annual energy consumption were compared with the energy performance standard of the office buildings in the CBECS database, ASHRAE Standard 90.1-2004 and Building Energy Efficiency Rating System in Korea. Result: The order of the green strategies applied in the main categories are Renewable Energy(63%), Indoor Environment Control(51%), Envelope Improvement(44%) and HVAC System & Control(28%). Specified strategies most widely used in the sub-categories are high-performance Insulation (70%), High Efficiency Heating, Cooling Source Equipment(85%), Photovoltaic&Solar Thermal(80%) and Daylighting(80%).

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.45-52
• /
• 2015

Purpose: Currently, since the energy consumption of apartment buildings is on the rise, it is necessary to reduce the total amount of the energy through the survey and analysis of energy consumption data. Although various studies for energy efficiency have been conducted, studies are more focused on the measurement of energy by using analysis tools. In addition, the studies are sufficient to analyze real data of the city gas in apartment buildings. Therefore, the objective of this study is to identify the property of annual and $1m^2$ city gas amount according to the exclusive dwelling area. Method: To achieve the objective, this study used the statistics such as descriptive, correlation, and analysis of variance (ANOVA) analysis. Result: As a result, there is positive relationship between the annual average of city gas and the exclusive dwelling area. However, in the case of $1m^2$ city gas amount, a negative relationship is mored. In the future, the findings of this study can be applied to develop the prediction model of the city gas consumption and implement it as basic data for energy efficiency of apartment buildings of future.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.81-86
• /
• 2014

In recent years, many researchers have considered the building energy consumption reduction accordingly to deal with abnormal climate changes and greenhouse gas reduction. However, the lighting energy use ratio has increased in spite of the development of the high efficiency lighting device. Therefore, the study aims to produce the LED lighting applications for the effective lighting heat removal by using the heat characteristics of LED lighting and analyzing the heat removal effect. In order to increase radiant heat efficiency, the heat pipe and heat sink was attached on PCB as LED lighting applications. Experiment was conducted to verify the temperature and air velocity of inside duct: thermocouples, anemometer. The heat removal effect of LED lighting applications was measured by observing the temperature of the lighting applications and the change of air velocity in duct. The experiment shows that the temperature change in the duct according to air velocity was $0.9{\sim}5.8^{\circ}C$. It is also concluded that heat removal was calculated from 33 to 81W.

• KIEAE Journal
• /
• v.17 no.4
• /
• pp.33-39
• /
• 2017

Purpose: The use of renewable energy system is essential for building energy independence and saving energy consumption in the building sector. Among renewable energy technologies, ground source heat pump(GSHP) system is more energy-efficient and environmental-friendly than other heat source systems due to utilize stable ground heat source. However, the GSHP system requires a high initial installation cost and installation space in limited urban area, so it is difficult to have superiority in the market of heat source system. Therefore, it is necessary to develop the installation method of low-cost and improve system performance. This paper aims to evaluate the performance of double u-tube ground heat exchanger(GHX) and verify system feasibility through real-scale experiment. Method: In this study, the real-scale experiment of vertical closed-type GSHP system was conducted using double u-tube GHX and high-efficiency grout. Through the verification experiment, heat source temperature, heat exchange rate(HER) and seasonal performance factor(SPF) were measured according to the long-term operation. In addition, the feasibility analysis was conducted comparing to the single u-tube system. Result: In the results of experiment, average HER was 136.27 W/m and average SPF was 5.41. Furthermore, compared to the single u-tube, the installation cost of the developed system could be reduced about 70% in the same heating load condition.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.75-81
• /
• 2014

This study aims at investigating the benefit of actively controlling humidity to improve thermal comfort and energy efficiency in climate zones other than hot-dry. For this research purpose, three thermal control strategies, which adopted different initiative degrees in humidity control, were developed - i) temperature controls, ii) temperature and humidity controls, and iii) thermal sensation controls. Performance of the developed strategies were experimentally tested in a full scale mock up of an office environment. The study revealed that air temperature was better controlled in the occupied zone under the first two strategies than the thermal sensation based strategy. On the other hand, the thermal sensation-based strategy maintained thermal sensation levels more comfortably. In addition, energy consumption was significantly reduced when humidity was actively controlled for thermal comfort. The thermal sensation-based control strategy consumed significantly less electricity than the first two strategies. From these findings, this study indicated that adoption of an active humidity control system based on thermal sensation can provide increased thermal comfort as well as energy savings for summer seasons in climatic zones other than hot-dry.

• Journal of Ecology and Environment
• /
• v.34 no.4
• /
• pp.357-363
• /
• 2011

To examine factors affecting feeding efficiency of grey herons (Ardea cinerea), the foraging behavior was studied at a reservoir in Asan city, Chungcheongnam-do, South Korea during the breeding seasons (from April to July) of 2006 and 2007. Four factors (age of foraging birds, time of day, breeding stage, and microhabitat type) were analyzed. Adults were more efficient foragers than recently fledged juveniles, and they had a higher success rate than juveniles. About half of the adults caught large prey, whereas most juveniles caught only small prey. Adult grey herons had different feeding efficiency according to the breeding stage. Pecking and capture rates were high during the late period (fledging stage), and biomass intake rates were high during the early (incubating stage) and late periods. However, time of day had no significant effect on foraging activity of adult grey herons. Feeding activities of adult grey herons also showed significant variation among microhabitat types. Pecking and capture rates were higher in the submerged plants area, but capture success rate and biomass intake rate were not different according to microhabitat type.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.3
• /
• pp.65-74
• /
• 2014

The aim of this study was to evaluate the monitoring efficiency of camera trapping in wild animals and to determine ways to increase its utilization. Nineteen sensor cameras were installed in Sobaeksan National Park from October 2012 to September 2013. During the study period, a total of 1045 terrestrial mammal photos were secured and 15 species habitats were identified. Shooting frequency was higher for medium and large mammals, especially full images of carnivores accounted for approximately 83%. A comparison of track surveys revealed that camera trapping was highly efficient and helped in capturing real image of species. The supply of lure and bait stimulates the sense of smell in carnivores, which further enhances the capturing of images by camera trapping. The results of this study provide data on the ecological characteristics of mammals, which can aid in determining habitat use by these animals, and thereby facilitate prevention of crop damage by wildlife.

• KIEAE Journal
• /
• v.16 no.2
• /
• pp.33-41
• /
• 2016

Purpose: The window energy rating system was developed in early 1990's and various kind of rating system has been implemented in advanced country such as Europe, Australia, Canada and the US since 2000. In Korea, the Energy Consumption Efficiency Rating Indication System has been implemented to promote supply of high efficiency window since July 2012. Normally, the window energy rating system based on heat balance which considers both thermal losses and solar heat gain is used and applied only to residential buildings. However, the system used nationally only considers thermal losses and is applied to every building regardless of its usage. Therefore, in this study, we indicated problems of domestic window energy rating system and looked for improvements. Method: We analyzed thermal performance of various windows through dynamic simulation applied to detached house and compared results with those of domestic and foreign rating system. Result : Thermal performance of south windows is more affected by SHGC than U-value, and that of north windows is also affected by SHGC a lot. The difference between the results of our study and current system is statistically significant. As a result, appropriate evaluation criteria which considers solar heat gain is required.

• The Korean Journal of Ecology
• /
• v.21 no.5_1
• /
• pp.409-418
• /
• 1998

A molel study was conducted to determine the optimal sample size for the analysis of the aquatic insect community in a stream reach of the Pangtae Creek, Kangwon-do in October 1995 and may 1996. The results showed that the required minimum sample size varied and depended on the purposes of the community analysis. Acoording to the Species: Area Curve method, at least 16 Surber samplings ($30{\times}30cm$) were required in a stream reach in each spring and fall survey. The species diversity index did not vary significantly as the sample size increased. Based on the coefficient of variation analysis, the minimum sample sizes of 10 were required in order to compare seasonal differences of the community in the study area. Considering the static community structure of aquatic insects, including both species numbers and individual numbers of aquatic insects, 11 and 7 samplings were optimal sizes for the fall and spring survey, respectively. We concluded that 12 Surber samplings from 3 riffle-pool sequences (4 samplings at each riffle-pool sequence) would be required in a stream reach (length 1 km) to obtain reliable as well as cost efficient data. Our model showed that the optimal sample size should be determined by interactions between minimum sample size, the degree of data reliability, and cost efficiency.