• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3087-3098
• /
• 2015

This study aims to examine the college students experience and intention to purchase organic clothes according to their lifestyle as the most promising consumer class in future. First, it was found that their experience to purchase organic clothes according to the subjects demographic characteristics showed significant differences in the categories of gender, age, related major, pocket money and income from except their residential areas. Second, factor structure analysis of their lifestyles was conducted and the factors analyzed were divided into "well-being orientation", "pursuit of changes", "eco-friendly view", "trend innovation", and "conservative security". Third, the present study examined differences in sub-dimensions of lifestyle characteristics such as "well-being orientation", "pursuit of changes", "eco-friendly view", "trend innovation", and "conservative security" depending on their experience or non-experience to purchase organic clothes and found that "well-being orientation", "pursuit of changes", "eco-friendly view", and "trend innovation" were higher in the group with experience to purchase organic clothes than in that with non-experience and it was known that all sub-factor groups including "well-being orientation", "pursuit of changes", "eco-friendly view", "trend innovation", and "conservative security" had a significant influence on intnetion to purchase organic clothes.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1199-1206
• /
• 2022

Fossil fuels are one of the various energy sources used by humans, and industrial development has been achieved by relying on fossil fuels for a long time in the past. In order to respond to the depletion of fossil fuels and climate change, the world is trying to build an eco-friendly energy ecosystem. Research on efficiency improvement using renewable energy and ESS in various ways for energy conversion is being promoted. In this paper, a microgrid for industrial complexes was designed, constructed, and demonstrated. It was operated in two modes: an independent mode that each plant generates and uses independently and a connected operation mode that allows energy sharing between factories. In the case of independent mode, PV and PCS were intermittently stopped and restarted according to the status change of SoC section of each site. But, in the case of the connected operation mode, stable power supply was confirmed through power transaction through the operation of the entire SoC. This paper presented and verified an algorithm to stably supply power to industrial complexes consisting of various consumers with different load characteristics.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.43-51
• /
• 2023

In this research, through LCA analysis, the environmental impact of automotive engine manufacturing and re-manufacturing was analyzed from the perspective of the entire process, and the greenhouse gas reduction effect was calculated based on this. The amount of greenhouse gas emitted from the process of acquiring and manufacturing raw materials for automotive engines is about 3,473 kg for new manufacturing and 872 kg for re-manufacturing. Thus, the amount of greenhouse gas reduction by engaging in re-manufacturing is about 2,601 kg; the analysis shows a reduction effect in each part of the entire process except for the processing stage. As a result of the LCA weighted analysis, the environmental impact of new product manufacturing was found to be 1.07E+03 Eco-point, and it was 2.67E+02 Eco-point for re-manufacturing. The share of GWP(Global Warming Potential) among the six major impact categories(Abiotic Depletion Potential, Acidification Potential, Eutrophication Potential, Global Warming Potential, Ozone-layer Depletion Potential, Photochemical Oxidant Creation Potential) as high at 99.72%(new manufacturing) and 99.68%(re-manufacturing).

• Journal of the Korean association of regional geographers
• /
• v.13 no.3
• /
• pp.355-375
• /
• 2007

This study explores the geographic characteristics of ecotour resources in Oceania based on the concept of ecotourism along with global education and investigates the global educational applications of eco-resources through a field survey of the Australian Cairns region. The field survey areas are the Green Island within the Great Barrier Reef, Barron Gorge National Park, the Australian Butterfly Sanctuary in Cairns, and the Tjabukai Aboriginal Cultural Park. This case study of the Cairns region is applicable to global education in these aspects: The underwater Observatory and Glass bottom boat in Green Island is used in efficient exploration of ocean ecology; Barron Gorge National Park provides an excellent forest tour with a well-made track, detailed directory, and trained park rangers; the old industrial trains are being recycled for tourism uses; the Australian Butterfly Sanctuary provides various language interpretations and experts to help further visitor's understanding of the surrounding eco-resources; The Aboriginal Cultural Park also utilizes a special program that helps people understand their culture.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.513-517
• /
• 2013

We investigated the properties of impregnated activated carbons, a commercial adsorbent for the individual protection equipment, and examined CO adsorption and oxidation to $CO_2$. The surface area, pore volume and pore size were measured for four commercial samples using Brunauer-Emmett-Teller/Barrett-Joyner-Halenda (BET/BJH), and atomic compositions of the sample surface were analyzed based on SEM/EDS and XPS. Impregnated activated carbons containing Mn and Cu for fire showed the catalytic CO oxidation to $CO_2$ with a high catalytic activity (up to 99% $CO_2$ yield), followed by the CO adsorption at an initial reaction time. On the other hand, C: for chemical biologial and radiological (CBR) samples, not including Mn, showed a lower CO conversion to $CO_2$ (up to 60% yield) compared to that of fire samples. It was also found that a heat-treated activated carbon has a higher removal capacity both for CO and $CO_2$ at room temperature than that of untreated carbon, which was probably due to the impurity removal in pores resulted in a detection-delay about 30 min.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.601-610
• /
• 2020

Recently, damage caused by drought is becoming worse and worse due to the global climate change. To overcome these problems, movable-weir to control the water level has been installed instead of a fixed-weir made from concrete. On the other hand, it is difficult to operate an existing moveable-weir because of the high cost of facility management and manpower consumption. In addition, because most moveable-weirs are installed in power systems, the operating cost and the cost of connection for power systems increase when they are located in remote areas. Therefore, this paper proposes an optimal design algorithm and the evaluation algorithm of the SOC (state of charge) of a lithium-ion battery to replace an existing power supply with eco-friendly movable-power with a power supply system using PV modules and lithium-ion batteries. In addition, this study modeled a 50kW power supply system of a movable-weir using PSCAD/EMTDC S/W. The simulation results confirmed that the proposed algorithm has stable operation characteristics in an independent operation mode and interconnection operation mode and that there is the possibility of commercialization with a benefits evaluation of the eco-friendly power supply system of a movable-weir.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.357-362
• /
• 2014

To prepare diketopyrrolopyrrole (DPP) red 254 pigment with high shield and bright color, DPP red 254 crude previously synthesized was treated at various thermal-treat temperature, addition derivative and ball-milling. The properties of samples were measured by the means of FT-IR, UV-Vis spectroscopy, TEM, PSA, BET surface area analyzer, viscometer and spectrophotometer. It was found that solvent thermal-treatment of the sample prepared after ball-milling as nano-scale was very effective method in pigmentation process.

• Journal of Agricultural Extension & Community Development
• /
• v.9 no.1
• /
• pp.101-119
• /
• 2002

The purpose of this study were to describe the problems of rural women in changing rural society and environment in Korea, to search for the development directions, and propose strategies for improving rural women's welfare. Related literatures and existing data were reviewed to investigate the present conditions, social-economic status, and economic activities of rural women in Jinju city, Gyeongsangnam-Do province. Jinju city had relatively higher percentage of farming people and rural women than other cities's of Gyeongsangnam-Do, and agriculture occupied important portion in industrial sector in the area. According to the Jinju 21C Vision Project, the city was planning to build eco-friendly environment and welfare rural society. To achieve the goals and objectives of the project, the following points should be considered: 1) Success of the project may depend on how to motivate and support rural women to participate actively in the project. 2) Jinju city should set up some practical strategies for improving the status of rural women who take key roles in environment and agriculture. 3) The city should establish strong support system and practical programs for rural women in building eco-friendly Jinju city.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.269-279
• /
• 2013

In this paper, an environmental assessment was carried out on the whole process of industrial business activities to establish a basic plan for climate change mitigation and energy independency. The whole process was divided into each discharge process in terms of water, air, solid waste, green house gases and refractory organic compounds. The flowcharts and basic unit of process were analysed for three years (2008-2010), being utilized as basic information for the life cycle assessment. It was found that the unit loading for the whole process significantly depends on changes in the operation rate change and highly concentrated wastewater inflow. About 35% of solid waste production was reduced by improving the incineration method with co-combustion in coal boiler, generating about 57% of electricity used for the whole process, and consequently reducing the energy costs. As the eco-efficiency index was found to be more than 1, compared to the previous years, it can be said that improvement in general has taken place.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.35-38
• /
• 2016

In this study, the mica used as a thermal-insulation material was modified with a silane coupling agent, octyltriethoxysilane (OTES), to improve its hydrophobicity. The modified mica was characterized using FT-IR spectrometer, water wettability test, and water contact angle measurement. The analysis exhibits that OTES for the modified mica sample was well bonded chemically and drastically enhanced the hydrophobicity. The reflectance observed as 73.9% (mica) and 86.4% (OTES/mica), respectively, for OTES/mica was improved about 12.5% before any modifications. Also the modified mica sample showed $7.2^{\circ}C$ decrease in the thermal-insulation performance of cool paints compared to that of using unmodified mica, indicating that the modification of mica with silane coupling agents could be effective in enhancing the thermal-insulation performance of the cool paint.