• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.1
• /
• pp.38-47
• /
• 2023

According to the government policy of environmental regulations, interest of ship, which made with High-Density Polyethylene (HDPE) as a low-carbon and eco-friendly material, is growing as a substitute for the existing fishery boat hull materials such as FRP, aluminum, steel etc. However, regulations related to the production of HDPE ship are still quite incomplete. Even there are no regulations related to structural analysis. Therefore, in this study, structural analysis is carried out by applying different design loads for each international classification for 38ft class HDPE power boats, and the results are compared and analyzed. According to this study, although there is a correlation between the based pressure value and the analysis result value of each class regulation, it is not necessarily proportional. Also, This analysis result shows a difference not only depending on the size of design load, but also application range of the load, the pressure adjustment factor and section shape. However, the occurrence point and trend of the maximum stress values were quite consistent. It is hoped that the results of this study will be used when establishing HDPE ship structure analysis procedures and standards in the future.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.636-643
• /
• 2020

This study developed a method for simulating greenhouse gas (GHG) emissions considering changes in conditions that may occur during the actual operation of small ships. Additionally, we analyzed and compared the results of the proposed method with that of existing emission simulations according to life-cycle assessment (LCA), thus verifying the proposed method's effectiveness. Through the results of the study, we confirmed that the proposed method improves the simulation by considering emissions due to ship operation, whereas existing methods focus on emissions caused by raw material production. Additionally, the proposed method could identify and quantify the relationship between changes in operating conditions and GHG emissions. We expect this GHG emissions simulation technique to help improve the environmental performance of ships in the future.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.705-713
• /
• 2023

The phenomenon of abnormal climate conditions resulting from greenhouse gas-induced global warming is increasingly prevalent. To address this challenge, global initiatives are underway to adopt environmentally friendly, zero-emission fuels. In this study, we investigate the hydrogen embrittlement characteristics of materials used for eco-friendly hydrogen storage systems. The effects of hydrogen embrittlement on austenitic stainless steels of the FCC series and structural steel of the BCC series were examined. Initially, test samples of three different steel types were prepared in 2t and 3t sizes, and hydrogen was injected into the specimens using an electrochemical method over a 24-hour period. Subsequently, a universal material testing machine (UTM) was employed to monitor changes in mechanical strength and elongation. The FCC series stainless steels exhibited a tendency for elongation to decrease, indicating low sensitivity to hydrogen. In contrast, the mechanical strength and elongation of the BCC series steel changed significantly upon hydrogen charging, posing challenges for prediction. The results of the present study are expected to serve as a fundamental database for analyzing the impact of hydrogen embrittlement on both FCC and BCC series steel materials.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.3
• /
• pp.737-748
• /
• 2014

Increasing amounts of ships exhaust gases emitted worldwide forced the International Maritime Organization to issue some restricted maritime legislation for reducing the adverse environmental impacts arising from such emissions. Consequently, ships emission reduction became one of the technical and economical challenges that facing the ships, operators. The present paper addresses the different strategies that can be used to reduce those emissions, especially nitrogen oxides and sulfur oxides. The strategies included: applying reduction technologies onboard, using of alternative fuels, and follows one of fuel saving strategies. Using of selective catalytic reduction and sea water scrubbing appeared as the best reduction technologies onboard ships. Moreover, among the various proposed alternative fuels, natural gas, in its liquid state; has the priority to be used instead of conventional fuels. Applying one of those strategies is the matter of ship type and working area. As a numerical example, the proposed methods were investigated at a high-speed craft operating in the Red Sea area between Egypt and the Kingdom of Saudi Arabia. The results obtained are very satisfactory from the point of view of environment and economic issues, and reflected the importance of applying those strategies.

• Journal of the Korean Society of Visualization
• /
• v.19 no.1
• /
• pp.62-67
• /
• 2021

Selective catalytic reduction(SCR) is an exhaust gas reduction device to remove nitro oxides (NOx). SCR operation of ship can be controlled through valves for minimizing economic loss from SCR. Valve in SCR-high pressure (HP) system is directly connected to engine exhaust and operates in high temperature and high pressure. Long-term thermal deformation induced by engine heat weakens the sealing of the valve, which can lead to unexpected failures during ship sailing. In order to prevent the unexpected failures due to long-term valve thermal deformation, a failure prediction system using autoregressive integrated moving average (ARIMA) was proposed. Based on the heating experiment, virtual data mimicking temperature range around the SCR-HP valve were produced. By detecting abnormal temperature rise and fall based on the short-term ARIMA prediction, an algorithm determines whether present temperature data is required for failure prediction. The signal processed by the data collection algorithm was interpolated for the failure prediction. By comparing mean average error (MAE) and root mean square error (RMSE), ARIMA model and suitable prediction instant were determined.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.234-235
• /
• 2019

Smart Maritime Autonomous Surface Ship(MASS) is aiming to provide eco-friendly smart maritime navigation service based on safety, reliability and efficiency for maritime safety and marine environment protection. In the future, it is expected to bring about a radical change across the marine industry such as marine, maritime, port, logistics, ship-building and so forth. Therefore, in this paper, policy priorities related to the introduction of MASS were identified, and response strategies for each industry were set up, and a policy plan for establishing a smart maritime logistics system covering shipping, port and shipbuilding fields was proposed.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.372-384
• /
• 2022

Total shipping accounts for 2.9 % of the annual average percentage of global anthropogenic GHG emissions. The International Maritime Organization implements EEDI (Energy Efficiency Design Index), Energy Efficiency eXisting-ship Index (EEXI), and Carbon Intensity Indicator (CII) as regulatory frameworks for shipping decarbonization. The Republic of Korea has enforced the Act on Development and Popularization of Greenship from 2020 and publicly announced the 1st national plan which was named 『2030 Greenship-K Promotion Strategy』 for the activation of a greenship market. The Greenship Certification Scheme is going on for the sustainability of Korean shipbuilding and shipping industries, to secure clean maritime environments, as well as to contribute to the national economy. Greenship Certification guarantees the credit of such eco-friendly technologies and products for shipping. The certification is going to be the basis of industrial competitiveness in coastal and international shipping. This study investigates an existing certification process, identifies the limitations, and proposes the process improved with several case studies. The improved certification scheme may have rationality for Net-zero with regard to climate alignment.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.3
• /
• pp.173-182
• /
• 2021

The maneuvering performance of a ship on the actual sea is very different from that in calm water due to wave-induced motion. Enhancement of a ship's maneuverability in waves at the design stage is an important way to ensure that the ship navigates safely. This paper focuses on the maneuvering prediction of a Russian trawler in wind and irregular waves. First, a unified seakeeping and maneuvering analysis of a Russian trawler is proposed. The hydrodynamic forces acting on the hull in calm water were estimated using empirical formulas based on a database containing information on several fishing vessels. A simulation of the standard maneuvering of the Russian trawler was conducted in calm water, which was checked using the International Maritime Organization (IMO) standards for ship maneuvering. Second, a unified model of seakeeping and maneuvering that considers the effect of wind and waves is proposed. The wave forces were estimated by a three-dimensional (3D) panel program (ANSYS-AQWA) and used as a database when simulating the ship maneuvering in wind and irregular waves. The wind forces and moments acting on the Russian trawler are estimated using empirical formulas based on a database of wind-tunnel test results. Third, standard maneuvering of a Russian trawler was conducted in various directions under wind and irregular wave conditions. Finally, the influence of wind and wave directions on the drifting distance and drifting angle of the ship as it turns in a circle was found. North wind has a dominant influence on the turning trajectory of the trawler.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.439-446
• /
• 2022

Efforts to reduce carbon dioxide(CO₂) emissions are being carried out due to climate environmental problems. Eco-friendly ships are also being developed, and various energy saving measures have been developed and applied. In ships, researches have been conducted in various fields such as electric propulsion system and energy saving devices. In addition, the development of ships using various renewable energy, such as kite using wind power and wind power generation, has been carried out. This paper proposes a plan to use renewable energy for ships by applying wave generators to small ships. In 2016, 130 small domestic ships drifted by sea due to discharge of starting storage batteries, and discharge cases accounted for the largest portion of the causes of domestic ship accidents. This is due to the excessive use of storage batteries for starting the main engine by departing in a weak storage battery state for small ships. Accordingly, two type wave power generators - opened flow wave power generator and enclosed vibrator type wave power generator - are developed for charging a starting storage battery when the ships are stationary at sea or port. Opened flow wave power generator utilizes the flow of fluid in the ship by using wave induced ship motion. Enclosed vibrator type wave power generator utilizes the pendulum kinetic energy located in a ship due to wave induced ship motion.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.25-36
• /
• 2023

To limit greenhouse gas emissions from ships, numerous environmental regulations and standards have been taken into effect. As a result, alternative fuels such as liquefied natural gas (LNG), liquefied petroleum gas (LPG), ammonia, and biofuels have been applied to ships. Most of these alternative fuels are low flashpoint fuels in the form of liquefied gas. Their use is predicted to continue to increase. Thus, management regulations for using low flash point fuel as a ship fuel are required. However, they are currently insufficient. In the case of LNG, ISO standards have been prepared in relation to bunkering. The Society for Gas as a Marine Fuel (SGMF), a non-governmental organization (NGO), has also prepared and published a guideline on LNG bunkering. The classification society also requires safety management areas to be designated according to bunkering methods and procedures for safe bunkering. Therefore, it is necessary to establish a procedure for setting a safety management area according to the type of fuel, environmental conditions, and leakage scenarios and verify it with a numerical method. In this study, as a feasibility study for establishing these procedures, application status and standards of the industry were reviewed. Classification guidelines and existing preceding studies were analyzed and investigated. Based on results of this study, a procedure for establishing a safety management area for bunkering in domestic ports of Korea can be prepared.