• Journal of Korean Society of Rural Planning
• /
• v.16 no.4
• /
• pp.157-169
• /
• 2010

This study has intended to devise a comprehensive rural planning, driven by residents based on ecological rural amenity paradigm for Busu area, Boeun-gun, South Korea. To reach the goal, this study has performed the following processes. First, we have analyzed the elements of threat, opportunity, weakness, and strength in both inside and outside village through 'SWOT analysis. Second, through strategic analysis and consultation, we have proposed developmental directions of Busu area. Third, based on an ecological rural amenity planning system composed of ecological economy system, ecological environment system, ecological history-culture system, ecological image system, and ecological society system, we have suggested research projects of each system Fourth, we selected projects through a general meeting with all stakeholders. Fifth, the selected projects were applied to Busu area by village residents and experts. Finally, the projects, which were appraised and revised by experts, residents, and governmental officers, were composed of ecological scenic agriculture center, resident's site for city dweller, energy independent village, eco-road, eco-pond, ecological park and parking lot, restoration of traditional culture, zone of ecological scenic agriculture, eco-tunnel, eco-fence, landmark, corporate identity, community center, forum and seminar, and education for residents' empowerment.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1053-1058
• /
• 2008

Porous medium was considered in the present study for the heat transfer enhancement. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. But when the air or water flow through in the porous medium, it is occurred the pressure drop between inlet and outlet. So in the present study investigated simulation result about the pressure drop in the porous medium before apply to heat exchanger. In this simulation, the thickness of the solid inside the porous medium region was varied 0.2 mm to 0.4 mm. And then the simulation result were compared the pressure drop in the same unit cell ($0.5\;mm{\times}0.5\;mm{\times}0.5\;mm$). To make the analysis model, it was assumed the 14-sided tetrakaidecahedron cell which has long been considered the optimal packing cell first proposed by the Lord Kelvin in 1887. And then the simulation is carried out using by STAR-CCM+ which is commercial software. The simulation result can be showed quantified pressure drop by solid effect in the porous medium.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.618-623
• /
• 2008

To enhancement heat transfer performance, the metallic foam as heat exchanger was studied rapidly. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. So the experimental study about the heat transfer characteristic of metallic foam is presented in this paper. The material in this experiment was used as FeCrAl which has density of 10 ppi, 20 ppi and 30 ppi respectively. And the results show the heat transfer is rise with permeability Reynolds number increase and the pressure drop metallic foam was increased with the ppi increase.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.4
• /
• pp.12-20
• /
• 2020

The demand for maintenance of underground facilities buried beneath the road continues to increase significantly, due to environmental problems caused by excessive noise and dust and complaints from urban residents, the demand for eco-friendly and low-noise road cutters is increasing. Therefore, we analyzed the cutting performance of low noise cutter and eco-friendly cutter and reviewed the improvement. Based on the field construction cases, problems and improvements were obtained according to the cutting machine working procedure. The productivity for cutting operations of eco-friendly cutters (36.0 seconds/m) was somewhat improved compared to the low noise cutters (37.6 seconds/m). However defects occurred in some sections and improvement was required.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.19 no.4
• /
• pp.1-7
• /
• 2023

In Korea, it is also mandatory for most buildings to receive energy efficiency rating certification from 2020 for the purpose of reducing greenhouse gas emissions and expanding green buildings. However, the issue of the accuracy of the ECO2 program continues to be raised, and comparisons have been made with dynamic energy analysis programs in a single type of building according to a single area. However, comparisons between multiple building types and multiple areas are insufficient. Therefore, in this study, cooling and heating loads according to multiple building types and multiple areas were analyzed through ECO2 and TRNSYS programs. The regions were supposed to be Seoul, Daejeon, Gwangju, and Busan and the building types were supposed to be office buildings and apartment houses. The annual average building load values from ECO2 were higher than those from TRNSYS. Among residential buildings across the four regions, the largest discrepancy was 41.4% in Seoul. Conversely, for commercial buildings, the most significant difference in annual average loads was noted in Gwangju, at 37.9%.

• 한국약용작물학회:학술대회논문집
• /
• 2011.09a
• /
• pp.352-353
• /
• 2011

• Water Engineering Research
• /
• v.6 no.4
• /
• pp.169-178
• /
• 2005

Comprehensive assessment of ecological riparian zone is to analyze and evaluate the status of riparian zone ecosystem. The existing problem of the ecosystem can be found through the assessment. The AHP-FUZZY method used in the assessment is based on the hierarchy model of index, grade model of object, and attribution degree of index. Accordingly, the four models have been discussed and presented from the aspect of the stability, landscape, eco-health and eco-safety of riparian zone.

• Advances in concrete construction
• /
• v.10 no.3
• /
• pp.237-245
• /
• 2020

Past research efforts already established geopolymer as an environment-friendly alternative binder system for ordinary Portland cement (OPC) and recycled aggregate is also one of the promising alternative for natural aggregates. In this study, an effort was made to produce eco-friendly mortar mixes using geopolymer as binder and recycled fine aggregate (RFA) partially and study the resistance ability of these mortar mixes against the aggressive environments. To form the geopolymer binder, 70% fly ash, 30% ground granulated blast furnace slag (GGBS) and alkaline solution comprising of sodium silicate solution and 14M sodium hydroxide solution with a ratio of 1.5 were used. The ratio of alkaline liquid to binder (AL/B) was also considered as 0.4 and 0.6. In order to determine the resistance ability against aggressive environmental conditions, acid attack test, sulphate attack test and rapid chloride permeability test were conducted. Change in mass, change in compressive strength of the specimens after the immersion in acid/sulphate solution for a period of 28, 56, 90 and 120 days has been presented and discussed in this study. Results indicated that the incorporation of RFA leads to the reduction in compressive strength. Even though strength reduction was observed, eco-friendly mortar mixes containing geopolymer as binder and RFA as fine aggregate performed better when it was produced with AL/B ratio of 0.6.

• Journal of Environmental Impact Assessment
• /
• v.15 no.4
• /
• pp.279-288
• /
• 2006

Saemangeum reclamation project was started in 1991 with the purpose of eco-friendly reclamation, but without clear definition of eco-friendliness. This study was carried out to find out the environmental indicators to define and evaluate the eco-friendliness of Saemangeum project. The methodology to identify the indicators included the analysis of similar reclamation projects, professional discussions, and Delphi survey. The eco-friendly indicators are theoretically based on the five elements of eco-friendliness; 1) resource consumption, 2) energy consumption, 3) pollution emission, 4) bio-diversity, 5) social amenity. The 69 indicators were explained in detail for the convenient use of the indicators by the potential users. The 69 indicators were classified into three categories such as pre-evaluation, process evaluation, and post-evaluation. In terms of spatial consideration, the 69 indicators were classified into two categories such as direct influence area and indirect influence area. Also the 69 indicators were classified into 7 categories: 1) sea, 2) lake, 3) agricultural land use, 4) industrial land use, 5) residential land use, 6) tourism land use, and 7) environmental land use. Twenty core indicators were selected from the 69 indicators by surveying the importance of each indicator. The core indicators are recommended in case of time and budget strain. When there are few quantitative data accumulated for the reclamation project, 5 macro indicators are recommended to be used. Macro indicators are qualitative in nature, and may be used in order to evaluate the overall eco-friendliness of a reclamation project.