• KIEAE Journal
• /
• v.10 no.5
• /
• pp.115-121
• /
• 2010

Lime was the solidifier mostly used at the fields of construction and civil works in the past. however, the development of Portland cement remarkably reduced the use of it. Recently as the concernment on circumstances gets higher, lime wined attention again as an eco-friendly material and was used at earth-using construction. This study examined the physical and chemical capacity of lime complexes with lime capacity improved, and performed fundamental study on the way to concretize by mixing it with earth. As a result, lime complex pressure strength was lower than cement pressure strength but it showed the possibility that its strength was improved by W/B control. The measurement of XRD after paste formation confirmed a compound generated by the reaction of Ca2+ion and Si, Al, and Fe from pozzolan reaction. A earth wall experiment by using lime complexes and earth showed that the higher, WB or the lower the quantity of unit combined materials, the lower the pressure strength was. The maximum pressure strength was maximum 11MPa when the quantity of unit combined materials was 450. It is because the composed earth particles had a high content of micro powder less than silt, so a lot of combination are demanded to secure fluidity. As a result of peptization experiment, after hardening, the material was not dissolved, which informed of the possibility of use as an outer subsidiary material. If the material is hardened by mold formation method, natural hardening crack appears. Cast expresses smart surface quality and enables to design for multiple purpose. The result shows the possibility of construction of low-story structures by using earth wall made of lime complexes and earth.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.85-85
• /
• 2019

하천시설물 설계, 시공 및 관리에 있어서 구성재료의 보호능력에 따라 예상하지 못한 조건에서 쉽게 파손될 수 있다. 이러한 영향은 하천환경의 변화를 야기시킬 수 있다. 제방 표면 재료는 제외 비탈면의 침식 방지를 목적으로 사용되는 재료로 주로 호안블록. 식생 매트, 사석, 돌망태, 식생등이 주로 사용되고 있다. 국내에서는 2000년대 이전에는 자연 흙사면의 식생, 돌망태, 단순 돌기형 콘크리트 블록 등이 주로 사용되었으며 2000년대 이후에는 하천환경을 고려하여 식생의 생장이 가능한 친환경 호안 블록 및 식생 매트의 적용이 일반적으로 시공되고 있다. 제방의 수리적 설계를 위해서는 재료 표면의 수리 특성, 즉, 조도계수 및 한계 유속, 한계 소류력이 제시되어야 하는데 이는 실험을 통해서 결정되어야 한다. 때문에 본 연구에서는 자연형 하상재료를 이용하여 바이오 폴리머 첨가시 증가하는 방어능력에 대한 향상도를 평가하는 실험적 평가 방법을 제안하기위해 홍수시 수리조건을 반영하여 상류에서부터 사류까지 다양한 유속범위에 따른 세굴 및 침식에 대한 실험을 진행하였다. 본 연구에서는 자연하천과 유사한 조건의 경사를 가지는 경사수로에서 실험연구를 통해 제방재료의 안정성 평가방법을 개발하였고, 안정성 평가를 위한 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 기존 문헌에서 제시되었던 측정 장치를 이용하여 바이오폴리머의 첨가에 유무에 따라 세굴에 대한 방어능력의 향상정도를 측정하고자 세굴 및 침식에 대한 평가 방법을 제시하고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.170-178
• /
• 2019

Recently, as the interest in energy savings has increased, there has been increasing use of LED lighting, which is an eco-friendly device that replaces high energy consuming fluorescent lamps and incandescent lamps. In the case of a high output LED, however, the life time is shortened due to deterioration caused by heat generation. As a solution to this problem, this paper evaluated the LED life extension effect by increasing the convective heat transfer coefficient of the heat sink surface for LED packaging. A roughing process was carried out using sandpaper and sand blasting. The changes in surface roughness and surface area after each surface treatment process were evaluated quantitatively and the convective heat transfer coefficient was measured. When sandblasting and sandpaper were used to roughen the aluminum surface, a higher convection heat transfer coefficient was obtained compared to the untreated case, and a high heat dissipation efficiency of 82.76% was obtained in the sandblast treatment. Therefore, it is expected that the application of heat dissipation to the heat sink will extend the lifetime of the LED significantly and economically by increasing the heat efficiency.

• Computers and Concrete
• /
• v.30 no.6
• /
• pp.421-432
• /
• 2022

Recently, the interminable ozone depletion and the global warming concerns has led to construction industries to seek for construction materials which are eco-friendly. Regarding this, Geopolymer Concrete (GPC) is getting great interest from researchers and scientists, since it can operate by-product waste to replace cement which can lead to the reduction of greenhouse gas emission through its production. Also, compared to ordinary concrete, geopolymer concrete belongs improved mechanical and durability properties. In spite of its positive properties, the practical use of geopolymer concrete is currently limited. This is primarily owing to the scarce structural, design and application knowledge. This study investigates the Mechanical and Durability of Geopolymer Concrete Containing Fibers and Recycled Aggregate. Mixtures of elastoplastic fiber reinforced geopolymer concrete with partial replacement of recycled coarse aggregate in different proportions of 10, 20, 30, and 40% with natural aggregate were fabricated. On the other hand, geopolymer concrete of 100% natural aggregate was prepared as a control specimen. To consider both strength and durability properties and to evaluate the combined effect of recycled coarse aggregate and elastoplastic fiber, an elastoplastic fiber with the ratio of 0.4% and 0.8% were incorporated. The highest compressive strength achieved was 35 MPa when the incorporation of recycled aggregates was 10% with the inclusion of 0.4% elastoplastic fiber. From the result, it was noticed that incorporation of 10% recycled aggregate with 0.8% of the elastoplastic fiber is the perfect combination that can give a GPC having enhanced tensile strength. When specimens exposed to freezing-thawing condition, the physical appearance, compressive strength, weight loss, and ultrasonic pulse velocity of the samples was investigated. In general, all specimens tested performed resistance to freezing thawing. the obtained results indicated that combination of recycled aggregate and elastoplastic fiber up to some extent could be achieved a geopolymer concrete that can replace conventional concrete.

• Journal of Advanced Technology Convergence
• /
• v.1 no.2
• /
• pp.19-25
• /
• 2022

It is intended to evaluate the performance of the shield after manufacturing a shield with cheap and eco-friendly iron oxide and alumina instead of lead, which is a radiation shielding material. After manufacturing the shield by mixing iron oxide and alumina with gypsum, the performance is evaluated by comparing it with gypsum board and lead apron using an X-ray tube. As a result of the experiment, the shielding performance of alumina was lower than that of the gypsum board, and when 50% of alumina was contained, the shielding performance was similar to that of the gypsum board. Iron oxide became similar to the shielding performance of lead apron when it contained about 75%. A shielding material using alumina shows shielding performance similar to that of gypsum, so it is not suitable as a substitute for lead. However, since iron oxide exhibits similar shielding performance to lead, it can be used as an X-ray shielding material to replace lead in the future, so further research is needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4B
• /
• pp.421-428
• /
• 2008

For last decades, the rapid coastal erosion process spreading along Korean peninsular has become a nuisance especially for tourism and local economy. Global warming and sea-level rise demand persistently new coastal protection strategies against the conventional methods using armored structures. In a view of this, Kweon et al. (2007) has proposed a new type of horizontal steel plates for an ideal candidate as eco-friendly detached breakwater systems for global warming era. The breakwater is composed of piles and horizontal porous plates that was devised for the optimized blockage effects and wave energy dissipations. This system provides outstanding performances as wave barrier and added advantages such as a rapid installation, an easy relocation, a perfect water circulation for the stagnation of pollutions in sheltered regions. The present experimental study focuses on the performance evaluations of the proposed system in wind wave conditions as a wave dissipator and reflector. The reflection, transmission, and energy dissipation of the random waves has been discussed in detail based on a newly proposed relation between wave steepness and a plate width normalized by wave length that are major factors affecting the wave transmission.

• Korean Journal of Veterinary Research
• /
• v.64 no.3
• /
• pp.19.1-19.8
• /
• 2024

Blue light in the visible spectrum naturally fights bacteria and effectively deactivates various Gram-positive and Gram-negative bacteria and fungi using photodynamic processes. It works against drug-resistant strains within these species and is gentler on mammalian cells than ultraviolet rays or chemicals. This study evaluated blue light as an affordable way to sanitize surfaces in poultry settings, such as eggs and litter. The study used an light-emitting diode array to remove harmful Escherichia coli and Staphylococcus aureus from these items and observed how blue light affected their survival rates. Blue light (455 nm) at 30 mW/cm2 for one hour decreased the survival of S. aureus and E. coli on solid agar plates to 29.88% and 21.04%, respectively, compared to non-irradiated cultures. Similarly, on untreated surfaces (such as plastic used for feeding and drinking), the survival rates dropped to 25.8% and 15.6%, respectively. The survival percentages on treated eggs were 50% (S. aureus) and 36.47% (E. coli) and 49% (S. aureus) and 48.2% (E. coli) on treated litter. Hence, blue light technology offers a promising alternative to traditional antimicrobial methods by leveraging specific wavelengths to target microbial cells. This approach can significantly reduce the microbial load in poultry environments, enhancing food safety and animal health. This paper reports the first use of blue light as an antibacterial within poultry research in Iraq, offering a fresh approach to disinfection in this field.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.200-210
• /
• 2015

The modeling for fast pyrolysis of biomass in fluidized bed reactor has been developed for accurate prediction of bio-oil and gas products and for yield improvement. The purpose of this study is to analyze and to compare the CFD(Computational Fluid Dynamics) simulation results with the experimental data from the CFD simulation results with the experimental data from the reference(Mellin et al., 2014) for gas products generated during fast pyrolysis of biomass in fluidized bed reactor. CFD(ANSYS FLUENT v.15.0) was used for the simulation. Complex pyrolysis reaction scheme of biomass subcomponents was applied for the simulation of pyrolysis reaction. This pyrolysis reaction scheme was included reaction of cellulose, hemicellulose, lignin in detail, gas products obtained from pyrolysis were mainly $CO_2$, CO, $CH_4$, $H_2$, $C_2H_4$. The deviation between the simulation results from this study and experimental data from the reference was calculated about 3.7%p, 4.6%p, 3.9%p for $CH_4$, $H_2$, $C_2H_4$ respectively, whereas 9.6%p and 6.7%p for $CO_2$ and CO which are relatively high. Through this study, it is possible to predict gas products accurately by using CFD simulation approach. Moreover, this modeling approach should be developed to predict fluidized bed reactor performance and other gas product yields.

• Clean Technology
• /
• v.28 no.3
• /
• pp.218-226
• /
• 2022

As a result of the recent social transformation towards a hydrogen economy and carbon-neutrality, the demands for hydrogen energy have been increasing rapidly worldwide. As such, eco-friendly hydrogen production technologies that do not produce carbon dioxide (CO₂) emissions are being focused on. Among them, ammonia (NH₃) is an economical hydrogen carrier that can easily produce hydrogen (H₂). In this study, Ru/Al₂O₃ catalyst coated onmetallic monolith for hydrogen production from ammonia was prepared by a dip-coating method using a catalyst slurry mixture composed of Ru/Al₂O₃ catalyst, inorganic binder (alumina sol) and organic binder (methyl cellulose). At the optimized 1:1:0.1 weight ratio of catalyst/inorganic binder/organic binder, the amount of catalyst coated on the metallic monolith after one cycle coating was about 61.6 g L^-1. The uniform thickness (about 42 ㎛) and crystal structure of the catalyst coated on the metallic monolith surface were confirmed through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Also, a numerical optimization regression equation for NH3 conversion according to the independent variables of reaction temperature (400-600 ℃) and gas hourly space velocity (1,000-5,000 h^-1) was calculated by response surface methodology (RSM). This model indicated a determination coefficient (R²) of 0.991 and had statistically significant predictors. This regression model could contribute to the commercial process design of hydrogen production by ammonia decomposition.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2003.06a
• /
• pp.1-5
• /
• 2003

In order to prepare a basis for ecological restoration of the Seoul Metropolitan area, ecological diagnoses on soil physico-chemical properties and vegetation structure were carried out. Land use patterns, actual vegetation, and biotope patterns were also investigated based on aerial photograph interpretation and field checks. I formulated landscape elements overlaying those data and evaluated the ecological value of each element. Soil pollution was evaluated by analyzing soil samples collected in each grid on the mesh map, divided by 2km $\times$ 2km intervals. Soil samples were collected in forests or grasslands escaped from direct human interference. Soil pollution evaluated from pH, and SO$_4$, Ca, Mg, and Al contents of soil was more severe in the urban outskirts than in the urban center. Those soil environmental factors showed significant correlation with each other. Vegetation in the urban area was different in species composition from that in suburban areas and showed lower diversity compared with that in the suburban areas. Successional process investigated by population structure of major species also showed a difference. That is, successional trend was normal in suburban areas, but that in urban areas showed a retrogressive pattern. The landscape ecological map of Seoul indicates that the urban center lacks vegetation and greenery space is restricted in urban outskirts. Such an uneven distribution of vegetation has caused a specific urban climate and thereby contributed to aggravation of air and soil pollution, furthermore causing vegetation decline. From this result, it was estimated that such uneven distribution of vegetation functioned as a trigger factor to deteriorate the urban environment. I suggested, therefore, a restoration plan based on landscape ecological principles, which emphasizes connectivity and even distribution of green areas throughout the whole area of the Seoul to solve this complex environmental problem. In this restoration plan, first of all, I decided the priority order for connection of the fragmented greenery spaces based on the distances from the core reserves comprised of green belt and rivers, which play roles as habitats of wildlife as well as for improvement of urban environment. Next, I prepared methods to restore each landscape element included in the paths of green network to be constructed in the future on the bases of such preferential order. Rivers and roads, which hold good connectivity, were chosen as elements to play important roles in constructing green network by linking the fragmented greenery spaces.